微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2S 112 | 飛機材料規范.易切削碳素鋼、光亮冷拔棒(40-50噸力/平方英寸;最大直徑或最小斷面尺寸1/2英寸)(主要用于制造 | Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts) |
| BS 2S 113 | 飛機材料規范.機械制造用40號碳素鋼光亮冷拔棒(45-55噸力/平方英寸;限定等圓斷面1英寸)(主要用于制造螺母) | Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts) |
| BS 2S 116 | 飛機材料規范.機械制造用40號碳素鋼光亮冷棒(55-65噸力/平方英寸;限定等圓斷面1/4英寸)(主要用于制造螺栓) | Specification for aircraft material - '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3/4 inch) (primarily intended for the manufacture of machined bolts) |
| BS 2SP 91-92 | 飛行器用碳素鋼蝸桿傳動夾緊裝置規范 | Specification for carbon steel worm drive clamps for aircraft |
| BS 2W 12 | 預制鍍鋅碳素鋼絲繩規范(公制和英制系列) | Specification for preformed zinc coated carbon steel wire rope (metric and inch series) |
| BS 3146-1 | 金屬熔模鑄造規范.第1部分:碳素鋼與低合金鋼 | Specification for investment castings in metal - Carbon and low alloy steels |
| BS 3293 | 石油工業用碳素鋼管法蘭(標稱尺寸24英寸以上)規范 | Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
| BS 3673-2 | 彈簧固定環規范.第2部分:碳素鋼E 型卡箍 | Specification for spring retaining rings - Carbon steel E clips |
| BS 3673-3 | 彈簧固定環規范.第3部分:碳素鋼 C型卡箍 | Specification for spring retaining rings - Carbon steel C clips |
| BS 3673-4 | 彈簧固定環規范.第4部分:米制系列碳素鋼開口簧環 | Specification for spring retaining rings - Carbon steel circlips - metric series |
| BS 3S 105 | 碳素鋼(僅供鍛造螺栓用的棒材)規范 | Specification for carbon steel (bar for the manufacture of forged bolts only) |
| BS 405 | 通用未涂覆的板網碳素鋼薄板規范 | Specification for uncoated expanded metal carbon steel sheets for general purposes |
| BS 4637 | 盤簧(襯墊和底座)用碳素鋼絲規范 | Specification for carbon steel wire for coiled springs (bedding and seating) |
| BS 4638 | Z形和方形彈簧用碳素鋼絲規范 | Specification for carbon steel wire for zigzag and square-form springs |
| BS 6043-1.1 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Sampling - Section 1.1: Sampling |
| BS 6043-1.10 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.揮發物含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of volatile matter content - Section 1.10 Determination of volatile matter content |
| BS 6043-1.11 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.喹啉不溶物中C/H原子比的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of the atomic C/H ratio of the quinoline-insoluble material - Section 1.11 Determination of the atomic C/H ratio of the quinoline-insoluble material |
| BS 6043-1.13 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.硫含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulfur content - Section 1.13 Determination of sulfur content |
| BS 6043-1.6 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.焦化值測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of coking value - Section 1.6 Determination of coking value |
| BS 6043-2-18 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.用艾氏卡(Eschlca)法測定總硫量 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the total sulfur by the Eschka method - Section 2.18 Determination of total sulfur by the Eschka method |
| BS 6043-2.20.1 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.煅燒焦炭的羧基反應性.通過質量損失法測定反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Carboxy reactivity of calcined coke - Determination of the reactivity by a loss in mass method - Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method |
| BS 6043-2.21.1 | 鋁生產用碳素材料的取樣和試驗方法.電極用焦炭.煅燒焦炭的空氣反應性.通過灼燒溫度測定反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Air reactivity of calcined coke - Determination of the reactivity by determination of ignition temperature - Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature |
| BS 6043-2.4 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.X射線熒光光譜法分析 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Analysis by X-ray fluorescence spectroscopy - Section 2.4: Analysis by X-ray fluorescence spectroscopy |
| BS 6043-2.9 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.粒度分布的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution - Section 2.9 Determination of particle size distribution |
| BS 6043-3.1.1 | 制鋁工業用碳素材料的取樣與試驗方法.電極.取樣.陰極取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of cathodes - Section 3.1 Sampling Subsection 3.1.1 Sampling of cathodes |
| BS 6043-3.1.2 | 制鋁工業用碳素材料的取樣與試驗方法.電極.取樣.陽極取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of anodes - Section 3.1 Sampling Subsection 3.1.2 Sampling of anodes |
| BS 6043-3.3 | 制鋁工業用碳素材料的取樣與試驗方法.電極.用尺寸法測定陰極碳塊和預焙陽極的體密度(表觀密度) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method - Section 3.3 Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method |
| BS 6043-3.4 | 制鋁工業用碳素材料的取樣與試驗方法.電極.用靜流法測定陰極碳塊和預焙陽極的開口孔隙率和體密度(表觀密度) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method - Section 3.4 Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| BS 6043-3.5.1 | 制鋁工業用碳素材料的取樣與試驗方法.電極.抗彎強度的測定.三點法 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method - Section 3.5 Determination of flexural strength Subsection 3.5.1 Three point method |
| BS 6043-3.6 | 制鋁工業用碳素材料的取樣與試驗方法.電極.室溫下陰極碳塊和預焙陽極電阻率的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature - Section 3.6 Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature |
| BS 6043-3.8.1 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.預焙陽極的羧基反應性.通過質量損失法測定反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Carboxy reactivity of prebaked anodes - Determination of the reactivity by a loss in mass method - Sec 3.8 Carboxy reactivity of prebaked anodes Subsec 3.8.1 Determination of the reactivity buy a loss in mass method |
| BS 6043-4.1 | 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.取樣方法 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Methods of sampling - Section 4.1 Methods of sampling |
| BS 6043-4.10 | 制鋁工業用碳素材料的取樣和試驗方法.第4部分:冷搗糊塊.第10節:熱搗糊塊表觀孔隙率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the apparent porosity of baked rammed paste |
| BS 6043-4.11 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第11節:烘焙搗糊塊熱膨脹性測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal expansion of baked rammed paste |
| BS 6043-4.13 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第13節:烘焙搗實糊塊灰分測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste |
| BS 6043-4.2 | 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.通過喹啉萃取測定有效粘合劑含量和聚焦體含量.聚焦體尺寸分 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
| BS 6043-4.4 | 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.未烘燒糊料的揮發物含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste |
| BS 6043-4.5 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第5節:未烘焙糊塊含水量測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of water content of unbaked pastes |
| BS 6043-4.6 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第6節:未烘焙糊塊最大表觀搗實密度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of maximum rammed apparent density of unbaked paste |
| BS 6043-4.8 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第8節:烘焙搗實糊塊電阻率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of electrical resistivity of baked rammed paste |
| BS 7S 1 | 飛機材料規范.機械加工用碳素鋼光亮冷拔棒材(35/45噸力/平方英寸.最大直徑或最小斷面尺寸4英寸) | Specification for aircraft material - Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension) |
| BS EN 2557 | 碳素纖維預浸織物.單位面積質量測定 | Carbon fibre preimpregnates - Determination of mass per unit area |
| BS EN 2559 | 碳素纖維預浸織物.樹脂成份,纖維成份以及單位面積纖維質量測定 | Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| BS EN 2561 | 碳素纖維增強的塑料.無向的塑料層壓制品.平行與纖維方向的抗拉試驗 | Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction |
| BS EN 2562 | 碳素纖維增強塑料.單向?qū)訅核芰?與纖維方向平行的彎曲試驗 | Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| BS EN ISO 2566-1 | 鋼.伸長值的換算.碳素鋼和低合金鋼 | Steel - Conversion of elongation values - Carbon and low alloy steels |
| BS HC 1 | 碳素鋼鑄件(500牛頓/平方毫米)規范 | Specification for carbon steel castings (500 N/mm2) |
| BS ISO 12986-2 | 鋁生產用碳素材料.預焙陽極和陰極碳塊.用四點法測定抗彎強度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method |
| BS ISO 12989-2 | 鋁生產用碳素材料.焙燒陽極和側壁塊.空氣反應性的測定.熱重分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method |
| BS ISO 3575 | 商品級和沖壓級連續熱鍍鋅碳素鋼薄板 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| BS ISO 4999 | 商品級和沖壓和結構級連續熱鍍錫(合金)冷軋?zhí)妓乇′摪? | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS ISO 8005 | 鋁生產用碳素材料.生焦炭和煅燒焦炭.灰分含量的測定 | Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content |
| BS ISO 8007-3 | 鋁生產用碳素材料.單個材料的取樣方案和取樣.側壁塊 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks |
| BS SP 166 | 航空航天用彈簧限動環規范.碳素鋼開口簧環(米制系列) | Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) |
| 編號 | 中文名稱 | 英文名稱 |