微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1377-6 | 土木工程用土壤試驗方法.第6部分:在液壓壓力盒內并且用孔隙壓力測量進行固結和滲透率試驗 | Methods of test for soils for civil engineering purposes - Consolidation and permeability tests in hydraulic cells and with pore pressure measurement |
| BS 1486-4 | 潤滑脂管嘴規范.第4部分:液壓潤滑脂管嘴規范 | Lubricating nipples - Specification for hydraulic grease nipples |
| BS 2000-313 | 石油和石油產品的試驗方法.液壓油和潤滑油的釋氣值測定 | Methods of test for petroleum and its products - Determination of air release of lubricating and hydraulic oils |
| BS 2M 49 | 飛機.液壓組件.已校準組件液體指示標記 | Aircraft - Hydraulic components - Marking to indicate fluid for which component is approved |
| BS 2M 51 | 液壓系統及元件壓力和溫度分類 | Classification for pressure and temperature for fluid systems and components |
| BS 2M 53 | 飛機.液壓系統.管道和管接頭熱沖擊試驗 | Aircraft - Fluid systems - Thermal shock testing of piping and fittings |
| BS 3810-2 | 材料裝卸術語.第2部分:輸送機及提升機(不包括氣動和液壓裝卸)術語 | Glossary of terms used in materials handling - Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) |
| BS 3810-3 | 材料裝卸術語.第3部分:氣動及液壓裝卸術語 | Glossary of terms used in materials handling - Terms used in connection with pneumatic and hydraulic handling |
| BS 3M 60 | 液壓系統24度錐形可分管道接頭.通用規范 | Separable tube fittings for fluid systems, 24 ° cone - General specification |
| BS 4062-2 | 液壓動力系統閥門.第2部分:性能測定方法 | Valves for hydraulic fluid power systems - Methods for determining performance |
| BS 4361-38 | 木工機械.第38部分:帶液壓夾緊裝置的立式木絲切絲機命名 | Woodworking machines - Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping |
| BS 4368-4 | 液壓和通用壓合管接頭.第4部分:型號試驗要求規范 | Metallic tube connectors for fluid power and general use - Specification for type test requirements |
| BS 4617 | 液壓流體動力傳輸用動力泵和電動機性能的測定方法 | Methods for determining the performance of pumps and motors for hydraulic fluid power transmission |
| BS 4742-2 | 農用機械液壓設備.第2部分:通用快速液壓管接頭規范 | Hydraulic equipment for agricultural machinery - Specification for quick-action hydraulic couplers for general purposes |
| BS 4742-3 | 農用機械液壓設備.第3部分:掛車用單動傾卸伸縮筒尺寸和額定壓力規范 | Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers |
| BS 4742-4 | 農用機械液壓設備.第4部分:掛車和機具用制動系統用液壓管接頭規范 | Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment |
| BS 4742-5 | 農用機械液壓設備.第5部分:掛車和機具用制動氣缸尺寸規范 | Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment |
| BS 4742-6 | 農業機械用液壓設備.第6部分:農業拖拉機液壓回程到槽口的尺寸和位置規范 | Hydraulic equipment for agricultural machinery - Specification for dimensions and location of agricultural tractor hydraulic return to sump porting |
| BS 4742-7 | 農用機械液壓設備.第7部分:農用拖掛車輛液壓制動系統管接頭用油口連接規范 | Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings |
| BS 4742-8 | 農用機械用液壓設備.第8部分:農用拖拉機分置式液壓和控制裝置顏色編碼方法 | Hydraulic equipment for agricultural machinery - Method for colour coding of remote hydraulic power services and controls on agricultural tractors |
| BS 4L 54 | 99%鋁管規范(冷拔:無縫:液壓試驗)(壁厚不超過12mm) | Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 4L 56 | 鋁-2<1/4>%鎂合金管規范(強度符號-O)(無縫管:液壓試驗)(壁厚不超過12mm) | Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 5173-102.10 | 橡膠和塑料軟管組件的試驗方法.第102部分:液壓試驗.第10節:吸油和放油軟管靜液壓試驗 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose |
| BS 5173-102.3 | 橡膠和塑料軟管及軟管組件試驗方法.第102部分:液壓試驗.第3節:燃料分配泵軟管體積膨脹測定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses |
| BS 5173-102.4 | 橡膠和塑料軟管組件試驗方法.第102部分:液壓試驗.第4節:液壓軟管體積膨脹測定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses |
| BS 5173-102.8 | 橡膠和塑料軟管及軟管組件試驗方法.第102部分:液壓試驗.第8節:硬質增強熱塑性塑料螺旋管壓力脈沖試驗 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses |
| BS 5242-1 | 液壓動力流體氣缸筒用管材.第1部分:特別精加工表面的鋼管規范 | Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces |
| BS 5242-2 | 液壓氣缸筒用管.第2部分:精鏜有色金屬管規范 | Tubes for fluid power cylinder barrels - Specification for non-ferrous metallic tubes with specially finished bores |
| BS 5244 | 液壓橡膠軟管及軟管組件的使用、貯藏及壽命期限推薦標準 | Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 5327 | 液壓裝置用后直角彎頭規范 | Specification - Swept elbow bends for fluid power applications |
| BS 5380 | 用O 型圈密封及G 系列緊固螺紋的液壓系流入口及連接螺栓規范 | Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads |
| BS 5412 | 適用于最大PN 10、最低液壓0.01MPa(0.1bar)的低阻力單一龍頭和組合龍頭組件(額定尺寸<1/2>和<1/4>)規范 | Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and 3/4) suitable for operation at PN 10 max - and a minimum flow pressure of 0.01 MPa (0.1 bar) |
| BS 5540-3 | 評定液壓油顆粒物污染規范.第3部分:瓶裝油液取樣方法 | Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples |
| BS 5540-6 | 液壓油顆粒污染評定.第6部分:顆粒自動計數器校準方法(使用單一尺寸膠乳球) | Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres) |
| BS 5540-7 | 液壓油顆粒污染評定.第7部分:污染等級測定方法(稱重法) | Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method) |
| BS 5655-10.2.1 | 電梯與服務電梯.第10部分:試驗和檢驗規范.第2節:液壓機.第1小節:新升降機交付使用試驗 | Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Hydraulic lifts - Commissioning tests for new lifts |
| BS 5655-12 | 電梯與服務電梯.現有液壓升降機改進的操作實施規程 | Lifts and service lifts - Code of practice for the undertaking of modifications to existing hydraulic lifts |
| BS 5751 | 往復運動的液壓密封件殼體尺寸規范 | Specification for dimensions of housings for hydraulic seals for reciprocating applications |
| BS 5944-1 | 液壓動力系統和部件氣動噪聲測量.第1部分:液壓泵試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps |
| BS 5944-2 | 液壓動力系統和部件氣動噪聲測量.第2部分:電動機試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors |
| BS 5944-4 | 液壓動力系統和部件空氣噪音測量.第4部分:流量和壓力控制閥聲功率級測定方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure |
| BS 5944-5 | 液壓系統和部件氣動噪音測量.第5部分:使消聲室測定液壓泵聲功率等級的簡易方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber |
| BS 5944-6 | 液壓動力系統和部件氣動噪聲測量.第6部分:平行六面體傳聲器陣列測試液壓泵噪聲 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array |
| BS 6100-2.5 | 建筑和土木工程術語.第2部分:土木工程.第5集:液壓工程和施工 | Glossary of building and civil engineering terms - Civil engineering - Hydraulic engineering and construction work |
| BS 6142 | 農用拖拉機和農機液壓系統技術數據的表述規范 | Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery |
| BS 6331-4 | 單桿雙動液壓作動筒安裝尺寸.第4部分:63bar系列(包括有關部件)規范 | Mounting dimensions of single rod double acting hydraulic cylinders - Specification for 63 bar series, including associated components |
| BS 6347-2 | 農用拖拉機性能評定.第2部分:液壓功率和提升能力測定方法 | Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity |
| BS 6361 | 電控液壓設備用三相插接件規范 | Specification for three-pin plug connectors for electrically controlled fluid power equipment |
| BS 6525 | 液壓流體動力系統用儲液器的設計與建造規范 | Specification for design and construction of reservoirs used in hydraulic fluid power systems |
| BS 6537 | 液壓流體設備用U型接頭規范 | Specification for staple type connectors for hydraulic fluid power applications |
| BS 6911-11 | 運土機械試驗.液壓挖掘機鏟斗和反向鏟裝載鏟斗容量額定值測定方法 | Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets |
| BS 6911-3 | 運土機械試驗.第3部分:液壓挖掘機工具強度測量 | Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators |
| BS 6911-8 | 運土機械試驗.第8部分:機械液壓系統操作傾斜度極限值的測定(靜態試驗法) | Testing earth-moving machinery - Determination of slope limits for machine fluid systems operation (static test method) |
| BS 6912-1 | 運土機械的安全性.液壓挖掘機和反鏟裝載機起重吊桿放下控制裝置 | Safety of earth-moving machinery - Specification for hydraulic excavator and backhoe loader boom lowering control device |
| BS 6912-9 | 運土機械的安全.第9部分:液壓挖掘機的升降能力的計算和檢驗方法 | Safety of earth-moving machinery - Methods for the calculation and verification of the lift capacity of hydraulic excavators |
| BS 6914-8 | 運土機械術語(包括尺寸和圖形符號定義).第8部分:液壓挖掘機用術語和商務規范 | Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for hydraulic excavators |
| BS 7198-1 | 液壓流體動力快速連接件.第1部分:尺寸和性能規范 | Hydraulic fluid power quick-action couplings - Specification for dimensions and performance |
| BS 7201-1 | 液壓流體動力.氣體加載蓄能器.第1部分:水容量0.5L以上無縫鋼蓄能器體規范 | Hydraulic fluid power - Gas loaded accumulators - Specification for seamless steel accumulator bodies above 0.5 L water capacity |
| BS 7250 | 液壓傳動正排量泵和電動機導出量的測定方法 | Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors |
| BS 7275-3 | 液壓流體動力馬達特性的測定.第3部分:恒定流和恒定扭矩法 | Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque |
| BS 7285 | 振動發生伺服液壓試驗設備的特性描述方法 | Method for describing characteristics of servo-hydraulic test equipment for generating vibration |
| BS 7287 | 耐火液壓油使用指南 | Guide for the use of fire-resistant hydraulic fluids |
| BS 7296-1 | 液壓動力卡盤式閥的空腔.第1部分:二通鑲套滑動閥規范 | Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves |
| BS 7388 | 液壓動力系統防泄漏指南 | Guide for prevention of leaks from hydraulic fluid power systems |
| BS 7403-5 | 內燃機用全流式潤滑油過濾器.第5部分:冷起動摸擬和液壓脈沖耐久性的試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability |
| BS 7416 | 液壓動力系統用精密無縫冷拔低碳鋼管規范 | Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems |
| BS 7417 | 平面'O'形密封液壓耦合器界面尺寸規范 | Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings |
| BS 7504 | 液壓流體動力.在壓力25 MPa 和40 MPa(250 巴 和400 巴)條件下使用的四螺釘、單片正方形法蘭連接器 | Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| BS 778 | 液壓用鋼管與接頭規范 | Specification for steel pipes and joints for hydraulic purposes |
| BS 7791 | 農業拖拉機.液壓器具 | Agricultural tractors - Hydraulic pressure for implements |
| BS AU 216-1 | 道路車輛用石油基制動液的液壓制動系統.第1部分:石油基基準液規范 | Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid |
| BS DD ISO/TR 16144 | 液壓流體動力.液體粒子自動計算器的校驗.SRM 2806 標準參照物質認證所使用的程序 | Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806 |
| BS EN 10246-1 | 鋼管的無損檢驗.證明液壓系統密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 | Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10275 | 金屬材料.管形環液壓試驗 | Metallic materials - Tube ring hydraulic pressure test |
| BS EN 10305-4 | 精密儀器用鋼管.技術交貨條件.液壓和氣動系統用無縫冷拉管 | Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10305-6 | 精密儀器用鋼管.交貨技術條件.液壓和氣動動力系統用焊接冷拉管材 | Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 12107 | 塑料管道系統.注射模塑熱塑性塑料管件、閥門和輔助設備.注射模塑管道元件用熱塑性材料的長期液壓強度的測定 | Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12162 | 液體泵.安全要求.液壓靜態試驗程序 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
| BS EN 12312-19 | 飛行器地面支持設備.特殊要求.飛行器千斤頂、軸式千斤頂和液壓機尾托架 | Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions |
| BS EN 12332-2 | 橡膠或塑料涂覆織物.抗破碎強度的測定.液壓法 | Rubber- or plastics-coated fabrics - Determination of bursting strength - Hydraulic method |
| BS EN 12622 | 機床安全性.液壓彎曲機 | Safety of machine tools - Hydraulic press brakes |
| BS EN 12639 | 液壓泵和泵組.噪音測試規程.2級和3級精度 | Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy |
| BS EN 12723 | 液壓泵.泵和設備的通用術語.定義、數量、字母符號和單位 | Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
| BS EN 12952-14 | 水管鍋爐和輔助設備.使用液壓氨和氨水溶液的廢氣DENOX系統的要求 | Water-tube boilers and auxiliary installations - Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| BS EN 13204 | 消防和救生用雙動液壓救生工具.安全和性能要求 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| BS EN 13242 | 土木工程和道路建筑用非粘合的和液壓結合材料用集料 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| BS EN 13286-3 | 松散的和液壓粘合的混合料.實驗室參考密度和水含量的測試方法.有控制參數的振動壓縮 | Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
| BS EN 13286-4 | 松散的和液壓粘合的混合料.實驗室參考密度和水含量的測試方法.振動錘 | Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer |
| BS EN 13286-40 | 松散的和液壓粘合的混合料.測定液壓粘合混合料直接抗拉強度的試驗方法 | Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures |
| BS EN 13286-41 | 松散的和液壓粘合的混合料.測定液壓粘合混合料抗壓強度的試驗方法 | Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures |
| BS EN 13286-42 | 松散的和液壓粘合的混合料.測定液壓粘合混合料非直接拉力強度的試驗方法 | Unbound and hydraulically bound mixtures - Test method for the determination of the indirect tensile strength of hydraulically bound mixtures |
| BS EN 13286-43 | 松散的和液壓粘合的混合料.測定液壓粘合混合料彈性模量的試驗方法 | Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
| BS EN 13286-46 | 松散的和液壓粘合的混合料.測定濕度值試驗方法 | Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value |
| BS EN 13286-5 | 松散的和液壓粘合的混合料.實驗室參考密度和水含量的測試方法.振動臺 | Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table |
| BS EN 13408 | 液壓固化地板修平和/或整平復合物的試驗方法.粘結強度的測定 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength |
| BS EN 13409 | 液壓固化地板修平和/或整平復合物的試驗方法.凝固時間測定 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
| BS EN 13802 | 鐵路設施.懸掛部件.液壓減震器 | Railway applications - Suspension components - Hydraulic dampers |
| BS EN 14227-13 | 液力粘結混合料.規范.液壓道路粘合劑處理的土壤 | Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder |
| BS EN 14653-1 | 地面維護支撐用人工操縱液壓支撐系統.產品規范 | Manually operated hydraulic shoring systems for groundwork support - Product specifications |
| BS EN 14653-2 | 地面維護支撐用人工操縱液壓支撐系統.計算或試驗評定 | Manually operated hydraulic shoring systems for groundwork support - Assessment by calculation or test |
| BS EN 1487 | 建筑物閥門.液壓安全組.試驗和要求 | Building valves - Hydraulic safety groups - Tests and requirements |
| BS EN 1777 | 防火和救援服務用液壓升降平臺.安全要求和試驗 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| BS EN 1804-1 | 地下采礦機械.液壓礦頂支撐物的安全性要求.支撐裝置及一般要求 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements |
| BS EN 1804-2 | 地礦機械.液壓礦頂支撐物的安全要求.動力裝置支腳和沖壓件 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams |
| BS EN 1804-3 | 地礦機械.液壓礦頂支撐物的安全要求.液壓控制系統 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems |
| BS EN 2591-515 | 航空航天系列.電和光學連接元件.試驗方法.液壓穩定性 | Elements of electrical and optical connection — Test methods — Part 515: Hydrolytic stability |
| BS EN 474-5 | 土方機械.安全.液壓挖掘機的要求 | Earth-moving machinery - Safety - Requirements for hydraulic excavators |
| BS EN 50340 | 電纜切割液壓裝置.用于公稱電壓在交流30KV以下電氣設施的電纜切割裝置 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| BS EN 60041 | 水輪機,現場驗收試驗測定蓄水泵和渦輪泵液壓性能 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
| BS EN 61362 | 液壓渦輪控制系統規范指南 | Guide to specification of hydroturbine control systems |
| BS EN 693 | 機床的安全性.液壓機 | Machine tools - Safety - Hydraulic presses |
| BS EN 773 | 液壓壓力排氣管、排水管和污水管道中使用部件的一般要求 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 804 | 塑料管道系統.壓力管道溶劑膠粘接頭的注射模塑承口連接管件.短期內部液壓壓力的試驗方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| BS EN 81-2 | 升降機的建造和安裝的安全規則.液壓梯 | Safety rules for the construction and installation of lifts - Hydraulic lifts |
| BS EN 81-3 | 電梯的建造和安裝的安全規則.電動和液壓飼服電梯 | Safety rules for the construction and installation of lifts - Electric and hydraulic service lifts |
| BS EN 853 | 軟管和軟管組件.金屬絲編織加強的液壓用類型.規范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| BS EN 854 | 橡膠軟管及管組件.紡織物增強的液壓用類型.規范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 855 | 塑料軟管和軟管組件.熱塑料紡織物增強的液壓用類型.規范 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| BS EN 856 | 橡膠軟管和軟管組件.橡膠包覆螺旋形金屬絲增強的液壓用類型.規范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| BS EN 857 | 軟管及軟管部件.液壓用的金屬線編帶增強的抗擠壓類型.規范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| BS EN 982 | 機械的安全性.流體動力系統及其元件的安全性要求.液壓傳動裝置 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| BS EN ISO 10592 | 小艇.液壓操舵系統 | Small craft - Hydraulic steering systems |
| BS EN ISO 12922 | 潤滑油、工業油及有關產品(L級).H族(液壓系統).HFAE、HFAS、HFB、HFC、HFDR和HFDU類別規范 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN ISO 13938-1 | 紡織品.纖維脹破特性.脹破強度和脹破膨脹測定的液壓方法 | Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension |
| BS EN ISO 1402 | 橡膠和塑料軟管及軟管組件.液壓靜力試驗 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| BS EN ISO 19879 | 液壓和一般用途金屬管連接件.液壓傳動連接件的試驗方法 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections |
| BS EN ISO 20763 | 石油和相關產品.液壓液耐磨性的測定.葉輪泵法 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method |
| BS EN ISO 4263-2 | 石油及其產品.抑制油和流體的老化性的測定.TOST試驗.HFC類液壓液的試驗程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids |
| BS EN ISO 4263-3 | 石油及其產品.抑制油和流體的老化性的測定.TOST試驗.合成液壓液的無水程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Anhydrous procedure for synthetic hydraulic fluids |
| BS EN ISO 4404-2 | 石油和相關產品.難燃液壓液抗腐蝕性的測定.不含水液體 | Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids |
| BS EN ISO 5198 | 離心式混流軸向泵.液壓性能試驗規程.精密級 | Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class |
| BS EN ISO 6743-4 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.H族(液壓系統) | Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
| BS EN ISO 6803 | 橡膠或塑料軟管和軟管組件.非彎曲液壓脈沖試驗 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| BS EN ISO 8032 | 橡膠和塑料軟管組件.液壓脈沖彎曲試驗(半Ω 型試驗) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) |
| BS EN ISO 8434-1 | 液壓傳動和一般用金屬導管的連接.24度壓合接頭 | Metallic tube connections for fluid power and general use - 24 ° compression fittings |
| BS EN ISO 8434-4 | 液壓及通用金屬管連接件.有O形面焊接管接頭的24度錐形連接件 | Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples |
| BS EN ISO 9080 | 塑料管道和導管系統.用外推法測定熱塑塑料管道的長期靜液壓強度 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| BS EN ISO 9906 | 渦輪式泵.液壓性能驗收試驗.1和2級 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
| BS EN ISO 9974-1 | 普通和液壓傳動用聯接件.用ISO 261彈性螺紋或金屬與金屬間密封的氣門和雙頭螺栓端頭.螺紋氣門 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports |
| BS EN ISO 9974-2 | 普通和液壓傳動用聯接件.用ISO 261彈性螺紋或金屬與金屬間密封的氣門和雙頭螺栓端頭.(E型)彈性密封的雙頭螺 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E) |
| BS EN ISO 9974-3 | 普通和液壓用聯接結件.用ISO 261螺紋的彈性或金屬與金屬間密封的氣門和雙頭螺栓端頭.(B型)金屬與金屬間密封 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B) |
| BS IEC 60092-204 | 船舶電氣設施.系統設計.電動和電動液壓操舵裝置 | Electrical installation in ships - System design - Electric and electrohydraulic steering gear |
| BS ISO 10100 | 液壓傳動.液壓缸.驗收試驗 | Hydraulic fluid power - Cylinders - Acceptance tests |
| BS ISO 10372 | 液壓流體動力.4孔和5孔伺服閥.安裝面 | Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces |
| BS ISO 10627-2 | 農用液壓式噴霧器.數據表.第2部分:部件相關的技術規范 | Hydraulic agricultural sprayers - Data sheets - Technical specifications related to components |
| BS ISO 10762 | 液壓流體動力.汽缸安裝尺寸.10Mpa(100bar)系列 | Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series |
| BS ISO 10766 | 液壓動力.汽缸.活塞及連桿用矩形截面軸承環溝槽尺寸 | Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods |
| BS ISO 10767-1 | 液壓流體動力.對系統和部件產生壓力波動級的測定.第1部分:泵精度法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps |
| BS ISO 10767-2 | 液壓傳動.系統和元件中產生壓力波動值的測定.泵的簡化方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps |
| BS ISO 10767-3 | 液壓傳動.系統和元件產生壓力波動值的測定.馬達用方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors |
| BS ISO 10770-1 | 液壓流體動力.電動調節液壓控制閥.第1部分:四向流動控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves |
| BS ISO 10770-2 | 液壓流體動力.電動調節液壓控制閥.第2部分:三向流動控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves |
| BS ISO 10771-1 | 液壓流體動力.金屬壓力容器外殼的疲勞壓力試驗.試驗方法 | Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method |
| BS ISO 10945 | 液壓傳動.充氣蓄能器.氣口的尺寸 | Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports |
| BS ISO 10946 | 液壓傳動.隔離式充氣蓄能器.優先選擇的液壓油 | Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports |
| BS ISO 11158 | 潤滑劑、工業油和相關產品(L類).H系列(液壓系統).HH、HL、HM、HR、HV和HG類別規范 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG |
| BS ISO 11170 | 液壓傳動.濾芯.性能特性檢定的試驗序列 | Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics |
| BS ISO 11171 | 液壓傳動.液體自動粒子計數器的校正 | Hydraulic fluid power - Calibration of automatic particle counters for liquids |
| BS ISO 11237-1 | 橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.用于油基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications |
| BS ISO 11500 | 液壓流體動力.采用光消失原理自動計數法對微粒子不純度的測定 | Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle |
| BS ISO 11599 | 含有包埋放射廢物的液壓粘合劑氣孔和透氣性的測定 | Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste |
| BS ISO 11943 | 液壓流體力學.液體在線上自動流水顆粒計數系統.校驗和批準方法 | Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation |
| BS ISO 12151-1 | 液壓流體力學和一般用途的連接件.軟管配件.有ISO 8434-3 O型環對接密封端的軟管組件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2 | 液壓傳動和通用聯接件.軟管接頭.帶ISO 8434-1和ISO 8434-4 O形圈24錐形末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings |
| BS ISO 12151-3 | 液壓流體力學和一般應用的連接件.軟管配件.帶ISO 6162法蘭端的軟管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12333 | 航空航天.定量液壓馬達.35000KPa系統的一般規范 | Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems |
| BS ISO 12334 | 航空航天.液壓的壓力補償?shù)淖兞枯斔捅?35000KPa系統的一般要求 | Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
| BS ISO 12922 | 潤滑油,工業油和相關產品(L級).H族(液壓系統).HFA、HFAS、HFB、HFC、HFDR和HFDU類別規范 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS ISO 13486-1 | 道路車輛.液壓制動系統.雙擴口管,螺紋孔,外螺紋接頭和管座 | Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13726 | 液壓流體動力.內徑為250mm-500mm的16MPa(160bar)緊湊式系列單桿汽缸.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
| BS ISO 14617-10 | 圖示的圖形符號.液壓變流器 | Graphical symbols for diagrams - Fluid power converters |
| BS ISO 15086-1 | 液壓流體動力.部件和系統液載噪音特性的測定.導言 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction |
| BS ISO 15086-2 | 液壓流體動力.部件和系統液載噪音特性的測定.管道流體聲速的測量 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
| BS ISO 15171-1 | 液壓和一般用途的連接.診斷用的液壓聯結器.不用于壓力條件下連接的聯結器 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure |
| BS ISO 15171-2 | 流體動力和通用連接器.診斷用液壓聯軸器.加壓連接用M16×2端頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure |
| BS ISO 15217 | 液壓流體動力系統和部件.16平方毫米接地電氣連接器.特性和要求 | Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements |
| BS ISO 15380 | 潤滑劑、工業用油和相關產品(L類).H族(液壓系統).HETG, HEPG, HEES 和 HEPR類的規范 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| BS ISO 16028 | 液壓流體動力.在20MPa(200巴)到31.5MPa(315巴)的壓力下使用平面型速動聯軸器.規范 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
| BS ISO 16656 | 液壓傳動.10MPa(100 bar)下使用的缸徑在32mm到100mm的單桿、短沖程氣缸.安裝尺寸 | Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions |
| BS ISO 16860 | 液壓傳動.過濾器.差壓設備試驗方法 | Hydraulic fluid power - Filters - Test method for differential pressure devices |
| BS ISO 16873 | 液壓流體動力.壓力開關.安裝表面 | Hydraulic fluid power - Pressure switches - Mounting surfaces |
| BS ISO 16874 | 液壓傳動.歧管及其元件的標識 | Hydraulic fluid power - Identification of manifold assemblies and their components |
| BS ISO 16889 | 液壓流體動力過濾器.過濾器元件過濾性能多路法的評估 | Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element |
| BS ISO 16902-1 | 液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵 | Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps |
| BS ISO 17559 | 液壓傳動.電控液壓泵.性能特征測定的試驗方法 | Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics |
| BS ISO 18413 | 液壓流體動力.零部件的清潔度.與污染收集、分析和數據報告相關的檢查文件和原則 | Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection , analysis and data reporting |
| BS ISO 20401 | 氣動液壓驅動系統.方向控制閥.直徑為8mm-12mm的電動圓形連接器的管腳分布規范 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm |
| BS ISO 20843 | 石油和相關產品.HFAE、HFAS和HFC類中抗燃液壓油pH的測定 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
| BS ISO 2941 | 液壓流體動力.過濾器元件.抗擠壓/爆裂性檢驗 | Hydraulic fluid power - Filter elements - Verification of collapse/burst resistance |
| BS ISO 2942 | 液壓傳動.濾芯.結構完整性的驗證和第一氣泡點的測定 | Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point |
| BS ISO 2943 | 液壓傳動.濾芯.材料和油液相容性的驗證 | Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids |
| BS ISO 2944 | 液壓動力系統和元件.標稱壓力 | Fluid power systems and components - Nominal pressures |
| BS ISO 3322 | 流體動力系統和部件.液壓缸.標稱壓力 | Fluid power systems and components - Cylinders - Nominal pressures |
| BS ISO 3601-3 | 液壓流體動力.O型環.質量驗收標準 | Fluid power systems - O-rings - Quality acceptance criteria |
| BS ISO 3723 | 液壓流體動力.過濾器元件.端向負荷試驗方法 | Hydraulic fluid power - Filter elements - Method for end load test |
| BS ISO 3724 | 液壓流體動力.過濾器元件.流動疲勞特性驗證 | Hydraulic fluid power - Filter elements - Verification of flow fatigue characteristics |
| BS ISO 3968 | 液壓傳動.過濾器.差壓與流量特性關系的評估 | Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics |
| BS ISO 4392-1 | 液壓流體動力.電動機特性的測定.在恒低速和常壓下 | Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure |
| BS ISO 4392-2 | 液壓流體動力.電動機特性的測定.穩定性 | Hydraulic fluid power - Determination of characteristics of motors - Startability |
| BS ISO 4401 | 液壓流體動力.四孔定向控制閥.安裝面 | Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| BS ISO 4404-1 | 石油和相關產品.耐火液壓流體的耐腐蝕性能的測定.含水流體 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids |
| BS ISO 4404 | 石油和相關產品.液壓系統用含水防火液體的耐腐蝕性測定 | Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| BS ISO 4406 | 液壓傳動.油液.固體顆粒污染等級代碼法 | Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles |
| BS ISO 4407 | 液壓流體動力.流體污染.用光學顯微鏡計數法測定粒狀物污染 | Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope |
| BS ISO 4413 | 液壓流體動力.有關系統的一般規則 | Hydraulic fluid power - General rules relating to systems |
| BS ISO 4925 | 道路車輛.液壓系統用非石油基制動液規范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| BS ISO 4927 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.) |
| BS ISO 5596 | 液壓傳動.隔離式充氣蓄能器.壓力、容積范圍和特性量 | Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities |
| BS ISO 5781 | 液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和單向閥.安裝面 | Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 6020-1 | 液壓流體動力.16MPa(160bar)系列單桿汽缸安裝尺寸.中型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series |
| BS ISO 6020-2 | 液壓流體動力.16MPa(160bar)系列單桿汽缸用安裝尺寸.小型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series |
| BS ISO 6020-3 | 液壓流體動力.16MPa(160bar)系列單桿汽缸用安裝尺寸.內徑從250mm到500mm的緊湊式系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm |
| BS ISO 6022 | 液壓傳動.25M Pa (250巴)系列單桿汽缸安裝尺寸 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
| BS ISO 6072 | 液壓流體動力.流體和標準合成橡膠材料間的兼容性 | Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials |
| BS ISO 6099 | 流體動力系統和元件.液壓缸.裝配尺寸和裝配類型的識別代碼 | Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types |
| BS ISO 6117 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.) |
| BS ISO 6162-1 | 液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為3,5MPa(35bar)至35MPa(350bar),DN1 | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| BS ISO 6162-2 | 液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為35MPa(350bar)至40MPa(400bar),DN1 | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 |
| BS ISO 6263 | 液壓流體動力.補償式流量控制閥.安裝面 | Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| BS ISO 6264 | 液壓流體動力.減壓閥.安裝面 | Hydraulic fluid power - Pressure-relief valves - Mounting surfaces |
| BS ISO 6547 | 液壓傳動.缸筒.裝有支撐環的活塞密封溝槽.尺寸和公差 | Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances |
| BS ISO 6605 | 液壓傳動.軟管及軟管組件.試驗方法 | Hydraulic fluid power - Hoses and hose assemblies - Test methods |
| BS ISO 6743-4 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.第4部分:H族(液壓系統) | Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
| BS ISO 6805 | 井下采礦用橡膠軟管和軟管組件.采煤用鋼絲加筋液壓型.規范 | Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| BS ISO 6981 | 液壓流體動力.汽缸.桿端孔.安裝尺寸 | Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
| BS ISO 7181 | 液壓流體動力.汽缸.汽缸內徑和連桿截面比 | Hydraulic fluid power - Cylinders - Bore and rod area ratios |
| BS ISO 7241-2 | 液壓傳動.快換接頭.試驗方法 | Hydraulic fluid power - Quick-action couplings - Test methods |
| BS ISO 7314 | 航空航天.液壓系統.金屬軟管組件 | Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 7425-1 | 液壓流體動力.彈性體塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings |
| BS ISO 7425-2 | 液壓流體動力.彈性體塑料面密封件的汽缸.尺寸和公差.活塞桿密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings |
| BS ISO 7789 | 液壓流體動力.二孔、三孔和四孔擰入式卡盤閥.孔腔 | Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities |
| BS ISO 7790 | 液壓流體動力.規格為02、03和05型的四孔模數疊閥和四孔定向控制閥.夾緊尺寸 | Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions |
| BS ISO 8131 | 液壓流體動力.16MPa(160 bar)緊湊式系列單桿汽缸.公差 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances |
| BS ISO 8132 | 液壓傳動.單桿缸、16 MPa (160 bar)中型系列和25 MPa (250 bar)系列.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories |
| BS ISO 8133 | 液壓傳動.單桿缸、16 MPa(160 bar)小型系列.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories |
| BS ISO 8135 | 液壓傳動.160巴(16MPa)和250巴(25MPa)中型系列的單桿液壓缸.公差 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Tolerances |
| BS ISO 8137 | 液壓流體動力.250巴(25MPa)系列單桿汽缸.油口尺寸 | Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions |
| BS ISO 8434-3 | 用于液壓傳動和一般用途的金屬管接頭.O形圈端面密封管接頭 | Metallic tube connections for fluid power and general use - O-ring face seal connectors |
| BS ISO/TS 13725 | 液壓動力.液壓缸.臨界載荷的測定方法 | Hydraulic fluid power - Cylinders - Method for determining the buckling load |
| BS L 117 | 鋁-鎂(1.0)-硅(0.6)-銅(0.28)-鉻(0.2)合金管規范(溶液處理和人工時效:未經液壓試驗)(厚度小于10mm) | Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) |
| BS L 118 | 鋁-鎂(1.0)-硅(0.6)-銅(0.28)-鉻(0.2)合金管規范(溶液處理和人工時效:液壓試驗)(壁厚度小于10mm) | Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) |
| BS M 55 | 航空航天用液壓管連接件和配件的回轉彎曲試驗方法 | Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use |
| BS M 61 | 液壓系統用“P”形卡箍(環形卡箍()輪廓尺寸規范 | Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems |
| BS M 62 | 軸線調準的液壓系統管道的夾緊裝置的設計和評定試驗規范 | Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series |
| BS M 65 | 壓力補償變量液壓泵規范 | Specification for pressure compensated variable delivery hydraulic pumps |
| BS M 66 | 液壓系統"Q"形夾(中心安裝)尺寸規范 | Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems |
| BS PAS 32-2 | 交付使用之前新升降機的檢查和測試規范.液壓升降機 | Specification for examination and test of new lifts before putting into service - Hydraulic lifts |
| BS SP 115 to 117 | 航空用液壓表面止動型潤滑脂嘴規范 | Specifications for hydraulic surface-check type lubricating nipples for aircraft |
| BS T 72-T 73 | 液壓用18/10鉻-鎳耐腐蝕鋼管規范(鈮/鈦穩定;550MPa) | Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa) |
| DD 225 | 采用旋轉磁盤擺動銷對液壓流體抗磨損性能的測定 | Determination of anti-wear properties of hydraulic fluids using the oscillating pin on rotating disc method |
| DD ENV 13282 | 液壓道路粘合劑.組分、規范和符合性標準 | Hydraulic road binders. Composition, specifications and conformity criteria |
| 編號 | 中文名稱 | 英文名稱 |