微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2952 | 內燃機冷卻系統用橡膠軟管規范 | Specification for rubber hose for i.c. engine cooling systems |
| BS 3092 | 內燃機主摩擦離合器、主動力輸出裝置及其有關附件的規范 | Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines |
| BS 3529 | 內燃機用飛輪箱安裝墊和托架的尺寸規范 | Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines |
| BS 3818 | 柴油機車及有軌內燃機車自動密封加油接頭規范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 3928 | 空氣過濾器的鈉焰試驗方法(為內燃機和壓縮機供氣用的除外) | Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors) |
| BS 5000-3 | 特種或?qū)Ｓ眯D(zhuǎn)電機規范.第3部分:往復式內燃機驅動發電機 | Specification for rotating electrical machines of particular types or for particular applications - Generators to be driven by reciprocating internal combustion engines |
| BS 5208 | 小型內燃機用動力輸出軸和安裝面的尺寸規范 | Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines |
| BS 5341-5 | 往復式內燃機用直徑小于等于200mm的活塞環.第5部分:環槽 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Ring grooves |
| BS 5341-6.1 | 往復式內燃機直徑小于等于200mm的活塞環.第6部分:術語、檢驗方法和通用規范.第1集;術語 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabulary, inspection methods and generic specifications - Vocabulary |
| BS 5341-7.3.1 | 往復式內燃機直徑小于等于200mm的活塞環.第7部分:單片環的設計、尺寸和命名.第3節:楔表面和半楔表面壓縮環. | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Keystone and half keystone compression rings - Specification for keystone rings |
| BS 5341-7.4 | 往復式內燃機直徑小于等于200mm的活塞環.第7部分:單片環設計、尺寸和命名.第4節:控油環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for oil control rings |
| BS 5341-8.1 | 往復式內燃機直徑小于等于200mm的活塞環.第8部分:多片組合式控油環設計、尺寸和命名.第1節:盤簧加壓控油環 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil control rings |
| BS 5514-4 | 往復式內燃機規范.性能.第4部分:轉速調節 | Reciprocating internal combustion engines - Performance - Speed governing |
| BS 5514-6 | 往復式內燃機.性能.第6部分:過速保護規范 | Reciprocating internal combustion engines - Performance - Specification for overspeed protection |
| BS 5514-7 | 往復式內燃機性能.第7部分:發動機功率規程 | Reciprocating internal combustion engines: performance - Codes for engine power |
| BS 5672 | 往復式內燃機汽缸頭的汽缸和閥旋轉方向標示和左、右單列發動機定義的規范 | Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines |
| BS 6327 | 往復式內燃機防火規范 | Specification for fire protection of reciprocating internal combustion engines |
| BS 7016-1 | 往復式內燃機部件和系統.第1部分:結構與外殼的術語詞匯 | Components and systems of reciprocating internal combustion engines - Glossary of terms for structure and external covers |
| BS 7016-2 | 往復式內燃機部件和系統.第2部分:主動齒輪的術語詞匯 | Components and systems of reciprocating internal combustion engines - Glossary of terms for main running gear |
| BS 7016-3 | 往復式內燃機部件和系統.第3部分:閥門、凸輸軸傳動和驅動機構的術語詞匯 | Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms |
| BS 7016-9 | 往復式內燃機的部件和系統.控制和監測系統 | Components and systems of reciprocating internal combustion engines - Control and monitoring systems |
| BS 7328 | 模型蒸汽發動機和內燃機規范 | Specification for model steam engines and internal combustion engines for models |
| BS 7403-1 | 內燃機滿液流潤滑油過濾器.不同壓力/流量特性試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Methods of test for differential pressure/flow characteristics |
| BS 7403-11 | 內燃機用全流式潤滑油過濾器.自潔式過濾器的試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Methods of test for self-cleaning filters |
| BS 7403-12 | 內燃機全流量潤滑油濾清器.用顆粒計數確定過濾效率 ,污染抑制能力 | Full-flow lubricating oil filters for internal combustion engines - Filtration efficiency using particle counting, and contaminant retention capacity |
| BS 7403-2 | 內燃機滿液流潤滑油過濾器.元件分支閥特性試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics |
| BS 7403-3 | 內燃機滿流式潤滑油過濾器.第3部分:耐高壓差和耐高溫性能試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Methods of test for resistance to high differential pressure and to elevated temperature |
| BS 7403-4 | 內燃機滿液流式潤滑油過濾器.初始微粒滯留效率、壽命和累積效率試驗方法(重力法) | Full-flow lubricating oil filters for internal combustion engines - Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| BS 7403-5 | 內燃機用全流式潤滑油過濾器.第5部分:冷起動摸擬和液壓脈沖耐久性的試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability |
| BS 7403-6 | 內燃機用全流式潤滑油過濾器.第6部分:靜態爆裂壓力的試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for static burst pressure |
| BS 7403-7 | 內燃機用全流式潤滑油濾清器.第7部分:振動疲勞試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for vibration fatigue |
| BS 7403-9 | 內燃機用全流式潤滑油過濾器.入口和出口防泄油閥試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves |
| BS 7698-10 | 往復式內燃機驅動交流發電機組.用包絡表面法對空氣中噪音進行測定 | Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method |
| BS 7698-12 | 往復式內燃機驅動交流發電設備.安全裝置的應急供電 | Reciprocating internal combustion engine driven alternating current generating sets - Emergency power supply to safety devices |
| BS 7698-7 | 往復式內燃機驅動的交流發電機組.規范和設計的技術申報 | Reciprocating internal combustion engine driven alternating current generating sets - Technical declarations for specification and design |
| BS 7698-8 | 往復式內燃機驅動的交流發電機組.低功率發電機組要求和試驗 | Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets |
| BS 7698-9 | 往復式內燃機驅動的交流發電機組.機械振動的測量和評估 | Reciprocating internal combustion engine driven alternating current generating sets - Measurement and evaluation of mechanical vibrations |
| BS AU 226 | 活塞式內燃機用飛輪箱標稱尺寸和公差規范 | Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines |
| BS AU 249 | 往復式內燃機離合器外殼規范.標稱尺寸和公差 | Specification for clutch housings for reciprocating internal combustion engines - Nominal dimensions and tolerances |
| BS CWA 15145 | 機動車燃料.內燃機用柴油乳劑中的水.要求和試驗方法 | Automotive fuels - Water in diesel fuel emulsions for use in internal combustion engines - Requirements and test methods |
| BS DD 208 | 往復式內燃機用的直徑為200mm及其以下的活塞環:窄環寬度的矩形截面活塞環的規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
| BS DD 209 | 往復式內燃機用的直徑為200mm及其以下的活塞環:半梯形活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
| BS EN 10090 | 內燃機用閥門鋼和合金 | Valve steels and alloys for internal combustion engines |
| BS EN 1175-2 | 工業貨車安全.電氣要求.裝有內燃機貨車的一般要求 | Safety of industrial trucks - Electrical requirements - General requirements for internal combustion engine powered trucks |
| BS EN 1175-3 | 工業貨車安全.電氣要求.裝有內燃機貨車的供電系統特殊要求 | Safety of industrial trucks - Electrical requirements - Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| BS EN 1679-1 | 往復式內燃機.安全.壓燃式發動機 | Reciprocating internal combustion engines - Safety - Compression ignition engines |
| BS EN 55012 | 車輛,船舶,內燃機驅動裝置.無線電干擾特性.（不包括那些在車輛/小船/驅動裝置中自身安裝的接收機或其附近車 | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices |
| BS EN 60034-22 | 旋轉電機.往復式內燃機(RIC)引擎驅動交流發電機. | Rotating electrical machines - A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets |
| BS EN 88528-11 | 往復式內燃機驅動交流發電機組.旋轉不間斷電力系統.性能要求和試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test methods |
| BS EN ISO 11102-1 | 內燃機.手柄起動裝置.安全要求和檢驗 | Reciprocating internal combustion engines - Handle starting equipment - Safety requirements and tests |
| BS EN ISO 11102-2 | 往復式內燃機.手柄起動裝置.脫離角度的試驗方法 | Reciprocating internal combustion engines - Handle starting equipment - Method of testing the angle of disengagement |
| BS EN ISO 11680-1 | 林業機械.動力桿驅動的修枝鋸的安全要求和試驗.帶有整體內燃機的裝置 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Units fitted with an integral combustion engine |
| BS EN ISO 11806 | 農林機械.內燃機驅動的便攜手持式灌木鏟除機和割草機.安全 | Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety |
| BS EN ISO 14314 | 往復式內燃機.反沖起動設備.一般安全要求 | Reciprocating internal combustion engines - Recoil starting equipment - General safety requirements |
| BS EN ISO 22868 | 林用機械.帶內燃機的便攜手持式機械的噪聲試驗規范.工程法(2級準確度) | Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (grade 2 accuracy) |
| BS EN ISO 8178-1 | 往復式內燃機.排放污染測定.氣態和顆粒狀排放污染物的試驗臺測定法 | Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions |
| BS EN ISO 8178-2 | 往復式內燃機.排氣污染測定.氣態和顆粒狀排放污染物的定點測量 | Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions at site |
| BS EN ISO 8178-4 | 往復式內燃機.排放污染測定.不同發動機應用的試驗周期 | Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles for different engine applications |
| BS EN ISO 8178-5 | 往復式內燃機排放物污染指數的測定.第5部分:燃料試驗 | Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels |
| BS EN ISO 8178-6 | 往復式內燃機.廢氣排放測定.測量結果和試驗報告 | Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests - Part 6 : Report of measuring results and tests |
| BS EN ISO 9785 | 船舶和海上技術.可行駛內燃機機動車的貨艙空間的通風.需要的總氣流量的理論計算 | Ship and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required |
| BS ISO 11424 | 內燃機氣動系統和真空系統用橡膠軟管和導管.規范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 13332 | 往復式內燃機.在發動機底座處測量的由高速和中速往復式內燃機產生的結構噪聲的試驗規程 | Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| BS ISO 13738 | 潤滑劑、工業用油和有關制品(L類).E系列(內燃機油).兩沖程汽油發動機油(類別EGB、EGC和EGD) 規范 | Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| BS ISO 13774 | 輸送內燃機燃料用橡膠和塑料軟管.易燃性試驗方法 | Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability |
| BS ISO 14396 | 往復式內燃機.內燃機功率的測定和內燃機功率測量的試驗方法.符合ISO 8178的廢氣排放試驗的補充要求 | Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
| BS ISO 14865 | 林業用機械.背包式內燃機電源便攜式手持灌木切割機和剪草機.安全要求和試驗 | Machinery for forestry - Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source - Safety requirements and testing |
| BS ISO 15550 | 內燃機.測量發動機功率的測定方法.總要求 | Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| BS ISO 18669-1 | 內燃機.活塞銷.一般規范 | Internal combustion engines - Pistons pins - General specifications |
| BS ISO 18669-2 | 內燃機.活塞銷.檢驗測量原理 | Internal combustion engines - Pistons pins - Inspection measuring principles |
| BS ISO 19013-2 | 內燃機燃料回路用橡膠軟管和管.規范.汽油燃料 | Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Gasoline fuels |
| BS ISO 19438 | 內燃機用柴油燃料和汽油過濾器.用粒子計數和污物滯留量測定過濾效率 | Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity |
| BS ISO 2261 | 往復式內燃機.手操縱裝置.運動的標準方向 | Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion |
| BS ISO 2710-1 | 往復式內燃機.詞匯.發動機設計和運行術語 | Reciprocating internal combustion engines - Vocabulary - Terms for engine design and operation |
| BS ISO 2710-2 | 往復式內燃機.詞匯.發動機維修術語 | Reciprocating internal combustion engines - Vocabulary - Terms for engine maintenance |
| BS ISO 3046-1 | 往復式內燃機.性能.功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求 | Reciprocating internal combustion engines - Performance - Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use |
| BS ISO 3046-5 | 往復式內燃機.性能.扭轉振動 | Reciprocating internal combustion engines - Performance - Torsional vibrations |
| BS ISO 5011 | 內燃機和壓縮機的空氣進氣清潔裝置.性能測試 | Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing |
| BS ISO 6415 | 內燃機.潤滑油用旋壓式過濾器.尺寸 | Internal combustion engines - Spin-on filters for lubricating oil - Dimensions |
| BS ISO 6621-2 | 內燃機.活塞環.檢驗測量規則 | Internal combustion engines - Piston rings - Inspection measuring principles |
| BS ISO 6621-4 | 內燃機.活塞環.一般規范 | Internal combustion engines - Piston rings - General specifications |
| BS ISO 6621-5 | 內燃機.活塞環.質量要求 | Internal combustion engines - Piston rings - Quality requirements |
| BS ISO 6622-1 | 內燃機.活塞環.鑄鐵制矩形環 | Internal combustion engines - Piston rings - Rectangular rings made of cast iron |
| BS ISO 6622-2 | 內燃機.活塞環.鋼制矩形環 | Internal combustion engines - Piston rings - Rectangular rings made of steel |
| BS ISO 6623 | 內燃機.活塞環.鑄鐵制刮環 | Internal combustion engines - Piston rings - Scraper rings made of cast iron |
| BS ISO 6624-2 | 內燃機.活塞環.鑄鐵制半梯形環 | Internal combustion engines - Piston rings - Half keystone rings made of cast iron |
| BS ISO 6624-4 | 內燃機.活塞環.鋼制半梯形環 | Internal combustion engines - Piston rings - Half keystone rings made of steel |
| BS ISO 6798 | 往復式內燃機.空氣傳播噪聲的測量.工程法和測量法 | Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
| BS ISO 7967-4 | 往復式內燃機.零部件和系統詞匯.增壓及進/排氣管道系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Pressure charging and air/exhaust gas ducting systems |
| BS ISO 7967-5 | 往復式內燃機.零件和系統的詞匯.冷卻系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Cooling systems |
| BS ISO 7967-6 | 往復式內燃機.零部件和系統詞匯.潤滑系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Lubricating systems |
| BS ISO 7967-7 | 往復式內燃機.零部件和系統詞匯.調節系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Governing systems |
| BS ISO 7967-8 | 往復式內燃機.零部件和系統詞匯.起動系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Starting systems |
| BS ISO 8178-10 | 往復式內燃機.排放測量.壓燃式發動機瞬態工況時排氣煙度現場測量用試驗周期和試驗方法 | Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
| BS ISO 8178-3 | 往復式內燃機.廢氣排放測量.第3部分:在穩定狀態下廢氣黑煙排放測量定義和方法 | Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions |
| BS ISO 8178-7 | 往復式內燃機.廢氣排放測量.第7部分:發動機系列測定 | Reciprocating internal combustion engines - Exhaust emission measurement - Engine family determination |
| BS ISO 8178-8 | 往復式內燃機.廢氣排放測量.第7部分:發動機成組測定 | Reciprocating internal combustion engines - Exhaust emission measurement - Engine group determination |
| BS ISO 8178-9 | 往復式內燃機.排放測量.壓燃式發動機瞬態工況排氣煙度試驗臺測量用試驗周期和試驗方法 | Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions |
| BS ISO 8528-1 | 往復式內燃機驅動的交流發電機組.應用、額定功率和性能 | Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance |
| BS ISO 8528-2 | 往復式內燃機驅動的交流發電裝置.發動機 | Reciprocating internal combustion engine driven alternating current generating sets - Engines |
| BS ISO 8528-3 | 往復式內燃機驅動的交流發電裝置.發電機組的交流發電機 | Reciprocating internal combustion engine driven alternating current generating sets - Alternating current generators for generating sets |
| BS ISO 8528-4 | 往復式內燃機驅動的交流發電裝置.控制設備和開關設備 | Reciprocating internal combustion engine driven alternating current generating sets - Controlgear and switchgear |
| BS ISO 8528-5 | 往復式內燃機驅動的交流發電裝置.發電裝置 | Reciprocating internal combustion engine driven alternating current generating sets - Generating sets |
| BS ISO 8528-6 | 往復式內燃機驅動的交流發電裝置.試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Test methods |
| DD 208 | 往復式內燃機用最大直徑為200mm的活塞環:帶有窄環寬度的矩形截面活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
| DD 209 | 往復式內燃機用最大直徑為200mm的活塞環:半梯形截面活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
| 編號 | 中文名稱 | 英文名稱 |