微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2G 146 | 飛行器用直流電動機規范 | Specification for d.c. motors for aircraft |
| BS 2G 147-2 | 飛機交流電動機規范.第2部分:三相可變頻率鼠籠式感應電動機 | Specification for a.c. motors for aircraft - Three-phase variable frequency squirrel-cage induction motors |
| BS 4617 | 液壓流體動力傳輸用動力泵和電動機性能的測定方法 | Methods for determining the performance of pumps and motors for hydraulic fluid power transmission |
| BS 5000-11 | 特種或?qū)Ｓ眯D(zhuǎn)電機.第11部分:小功率電動機和發電機 | Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators |
| BS 5000-50 | 特種或?qū)Ｓ眯D(zhuǎn)電機.第50部分:燃油器電動機尺寸 | Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors |
| BS 5655-10.1.1 | 電梯與服務電梯.第10部分:試驗和檢驗規范.第1節:電動機.第1小節:新升降機交付使用試驗 | Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Electric lifts - Commissioning tests for new lifts |
| BS 5944-2 | 液壓動力系統和部件氣動噪聲測量.第2部分:電動機試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors |
| BS 7250 | 液壓傳動正排量泵和電動機導出量的測定方法 | Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors |
| BS 7275-3 | 液壓流體動力馬達特性的測定.第3部分:恒定流和恒定扭矩法 | Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque |
| BS 787-1 | 礦用式防爆電纜終端箱規范.第1部分:(650V以下三相交流電路用)電動機 直接起動用電纜終端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) |
| BS AU 233 | 乘用車起動電動機電氣連接件規范 | Specification for starter motor electrical connections for passenger cars |
| BS AU 234 | 道路車輛起動電動機一般要求試驗方法 | Methods of test and general requirements for road vehicle starter motors |
| BS AU 252 | 道路車輛用經節起動器電動機小齒輪規范 | Specification for diametral pitch starter motor pinions for road vehicles |
| BS DD IEC TS 60034-20-1 | 旋轉電機.控制電動機.步進電動機 | Rotating electrical machines - Control motors - Stepping motors |
| BS DD IEC TS 60034-26 | 旋轉電機.非平衡電壓對三相感應電動機性能的影響 | Rotating electrical machines - Effects of unbalanced voltages on the performance of three-phase induction motors |
| BS EN 1060-3 | 日常攜帶的血壓計.電動機械血壓測量系統的補充要求 | Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems |
| BS EN 137000 | 電子元器件質量評定協調體系.通用規范:電動機用于因式交流電容器和非定式電容器 | Harmonized system of quality assessment for electronic components - Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| BS EN 137100 | 電子元器件質量評定協調體系.分規范..電動機起動器非固體電解質電解鋁交流固定電容器.合格鑒定批準 | Harmonized system of quality assessment for electronic components - Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval |
| BS EN 137101 | 電子元器件質量評定協調體系.空白詳細規范.發電動機起動器鋁交流電解質固定電容器.合格鑒定批準 | Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications (Qualification approval) |
| BS EN 29775 | 小船.15KW-40KW功率單外舷電動機遠程操縱系統 | Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power |
| BS EN 50347 | 標準尺寸和輸出的通用三相感應電動機.框號56-315,法蘭號65-740 | General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740 |
| BS EN 60034-12 | 旋轉電機.單速三相籠型感應電動機的起動性能 | Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors |
| BS EN 60252-1 | 交流電動機的電容器.總則.性能、試驗和額定值.安全要求.安裝和操作指南 | A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| BS EN 60252-2 | 交流電動機電容器.電動機起動電容器 | A.C. motor capacitors - Motor start capacitors |
| BS EN 60335-2-34 | 家用和類似用途電器的安全規范.特殊要求.電動機-壓縮機組的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements for motor-compressors |
| BS EN 60349-1 | 鐵路用途.鐵路與公路車輛用旋轉電機.用于除電子變換器饋電交流電動機之外的機器 | Railway applications - Rotating electrical machines for rail and road vehicles - Machines other than electronic convertor-fed alternating current motors |
| BS EN 60349-2 | 鐵路設施.鐵路和公路車輛用旋轉電機.電子變流器饋電交流電動機 | Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors |
| BS EN 60470 | 高壓交流接觸器和基于接觸器的電動機起動器 | High-voltage alternating current contactors and contactor-based motor starters |
| BS EN 60644 | 電動機電路用高壓熔斷體規范 | Specification for high voltage fuse-links for motor circuit applications |
| BS EN 60730-2-2 | 家用或類似用途的自動電控制器規范.特殊要求.電動機熱保護器的特殊要求 | Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for thermal motor protectors |
| BS EN 60730-2-4 | 家用和類似用途自動電氣控制裝置規范.特殊要求.密封和半密封型電動機壓縮機組的電動機熱保護器 | Specification for automatic electrical controls for household and similar use - Particular requirements - Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type - Section 4: Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| BS EN 60947-4-1 | 低壓開關設備和控制設備規范.連接器和起動器.電動機械連接器和起動器 | Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters |
| BS EN 60947-4-2 | 低壓開關設備和控制設備規范.接觸器和電動機起動機.交流半導體電動機控制器和起動器 | Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
| BS EN 60947-4-3 | 低壓開關設備和控制設備規范.接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器 | Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads - AC semiconductor controllers and contactors for non-motor loads |
| BS EN 61136-1 | 半導體電源變換器.調速電驅動系統.一般要求.直流電動機驅動額定值規范 | Semiconductor power convertors - Adjustable speed electric drive systems - General requirements - Rating specifications, particularly for d.c. motor drives |
| BS EN 61377-2 | 鐵路設施.機車車輛.聯合試驗.斷路直流牽引電動機及其控制設備 | Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control |
| BS EN 61377-3 | 鐵路設施.鐵路車輛.由間接變流器饋電的交流電動機及其控制系統的聯合檢驗 | Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| BS EN ISO 11498 | 牙鉆手柄.牙科用低壓電動機 | Dental handpieces - Dental low-voltage electric motors |
| BS EN ISO 4126-4 | 過壓保護安全設備.由伺服電動機控制的安全閥 | Safety devices for protection against excessive pressure - Pilot operated safety valves |
| BS EN ISO 5163 | 石油產品.發動機和航空燃料爆震特性的測定.馬達法 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method |
| BS EN ISO 6185-2 | 充氣艇.電動機最大額定功率為4.5KW至15KW的小艇 | Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive |
| BS EN ISO 6185-3 | 充氣艇.最大電動機功率為15KW及其以上的小氣艇 | Inflatable boats - Boats with maximum motor power rating of 15 kW and greater |
| BS IEC 60092-301 | 船上電氣裝置.設備.發電機和電動機 | Electrical installation in ships - Equipment - Generators and motors |
| BS ISO 10767-3 | 液壓傳動.系統和元件產生壓力波動值的測定.馬達用方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors |
| BS ISO 12333 | 航空航天.定量液壓馬達.35000KPa系統的一般規范 | Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems |
| BS ISO 14617-11 | 圖示的圖形符號.熱轉換和熱電動機設備 | Graphical symbols for diagrams - Devices for heat transfer and heat engines |
| BS ISO 3019-1 | 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.以米制單位表示的英制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Inch series shown in metric units |
| BS ISO 3019-2 | 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.米制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Metric series |
| BS ISO 4392-1 | 液壓流體動力.電動機特性的測定.在恒低速和常壓下 | Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure |
| BS ISO 4392-2 | 液壓流體動力.電動機特性的測定.穩定性 | Hydraulic fluid power - Determination of characteristics of motors - Startability |
| 編號 | 中文名稱 | 英文名稱 |