微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1640-1 | 石油工業用鋼對焊管管件規范.第1部分:鍛制碳鋼與鐵素體合金鋼管件 | Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings |
| BS 1640-4 | 石油工業用鋼對焊管管件規范.第4部分:鍛造和鑄造奧氏體鉻鎳鋼管件:米制單位 | Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units |
| BS 3868 | 預制排水用鍍鋅鋼管件規范 | Specification for prefabricated drainage stack units in galvanized steel |
| BS 416-1 | 砂型鑄造或離心鑄造的排水和通風鑄鐵管及管件.第1部分:插承套管系統規范 | Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron - Specification for spigot and socket systems |
| BS 460 | 雨水排放用鑄鐵管件.規范 | Cast Iron rainwater goods - Specification |
| BS 4677 | 輸送液體用奧氏體不銹鋼管件的電弧焊規范 | Specification for arc welding of austenitic stainless steel pipework for carrying fluids |
| BS 5667-5 | 連續式機械裝卸設備規范.安全性要求.第5部分:松散物料:氣動裝卸用連接器與軟管件 | Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling |
| BS 569 | 石棉水泥雨水管件規范 | Specification for asbestos-cement rainwater goods |
| BS 759-1 | 鍋爐與鍋爐連接管路用閥門、水位計及其它安全管件.第1部分:閥門、安裝件和管件規范 | Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings |
| BS 7892 | 水泥砂漿襯砌的可鍛鐵管和管件密封涂層規范 | Specification for seal coats on cement mortar lined ductile iron pipes and fittings |
| BS 864-3 | 銅和銅合金制毛細管與承壓管管件.第3部分:聚乙烯管用承壓管件 | Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes |
| BS EN 10329 | 海上或離岸管道用鋼管和管件.外部連接包覆層 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| BS EN 12107 | 塑料管道系統.注射模塑熱塑性塑料管件、閥門和輔助設備.注射模塑管道元件用熱塑性材料的長期液壓強度的測定 | Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12117 | 塑料管道系統.管件、閥門和附件.氣體流速與壓降之間關系的測定 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| BS EN 12585 | 玻璃裝置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互換性 | Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability |
| BS EN 14424 | 帶螺旋箍的軟管管件 | Hose fittings with screwed ferrules |
| BS EN 14901 | 球墨鑄鐵管、配件和附件.球墨鑄鐵配件及附件的環氧涂層(重載).要求和試驗方法 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| BS EN 274-2 | 衛生器具用下水道管件.試驗方法 | Waste fitting for sanitary appliances - Test methods |
| BS EN 295-6 | 排水管和污水管用陶制管、管件及管接頭.陶制管人孔的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes |
| BS EN 295-7 | 排水管和污水管用陶制管、管件及管接頭.陶制管和管插接接頭的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking |
| BS EN 545 | 水管道用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| BS EN 598 | 污水工程用球墨鑄鐵管、接頭、配件及其連接件.要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| BS EN 60423 | 電氣設備用導管.電氣裝置用導管的外徑和導管及管件的螺紋 | Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| BS EN 682 | 彈性密封件.運送氣體和液態碳?xì)浠衔锏墓芗芭浼杏玫拿芊饧牟牧弦? | Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| BS EN 713 | 塑料管道系統.管件和聚烯烴壓力管的機械連接.組件承受彎曲作用時內部壓力密封性的試驗方法 | Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
| BS EN 714 | 熱塑管道系統.壓力管和模塑管件的無端負荷彈性密封環型連接件.在無軸向推力時內部流體靜壓力下密封性的試驗 | Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust |
| BS EN 804 | 塑料管道系統.壓力管道溶劑膠粘接頭的注射模塑承口連接管件.短期內部液壓壓力的試驗方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| BS EN 877 | 建筑物排水用鑄鐵管和配件及其接頭和附件.要求、試驗方法和質量保證 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
| BS EN 969 | 煤氣管道用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法 | Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| BS EN ISO 12162 | 壓力用熱塑性塑料管道和管件.分類和設計.總體使用（設計）系數 | Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient |
| BS EN ISO 1746 | 橡膠或塑料軟管和管件.彎曲試驗 | Rubber or plastics hoses and tubing - Bending tests |
| BS EN ISO 6708 | 管件.標稱尺寸的定義和選擇 | Pipework components - Definition and selection of DN (nominal size) |
| BS EN ISO 8795 | 用于輸送供人消耗用水的塑料管道系統.析出物滲移量的車測定.塑料管道、管件和連接件的析出物滲移量的測定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
| BS ISO 10147 | 交聯聚乙烯(PE-X)管和管件.通過測定凝膠含量估算交聯度 | Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content |
| BS ISO 10838-1 | 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械管件.標稱外徑小于或等于63mm的管道用金屬管件 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10838-2 | 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械式管件.標稱外徑大于63mm的管道用金屬管件 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter greater than 63mm |
| BS ISO 10838-3 | 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械式管件.標稱外徑小于或等于63mm的管道用熱塑性塑料管件 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 15840 | 船舶和海上技術.海上設備用熱固性樹脂纖維玻璃管和管件的標準規范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 16132 | 球墨鑄鐵管和配件.水泥灰漿襯套的密封涂層 | Ductile iron pipes and fittings - Seal coats for cement mortar linings |
| BS ISO 16241 | 管和管件用聚乙烯材料耐慢速裂紋伸展的測定的缺口拉伸試驗(PENT) | Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) |
| BS ISO 4179 | 壓力和非壓力管道用球墨鑄鐵管和配件.水泥灰漿內襯 | Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining |
| BS ISO 727-1 | 承壓的管件用未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.米制系列 | Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series |
| BS ISO 727-2 | 壓力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的帶普通管套的管 | Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series |
| BS ISO 8085-1 | 供應燃?xì)獾木垡蚁┕苌鲜褂玫木垡蚁┕芗?米制系列.規范.用加熱工具進行套筒熔融的管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Fittings for socket fusion using heated tools |
| BS ISO 8085-2 | 供應氣體燃料的聚乙烯管上使用的聚乙烯管件.米制系列.規范.熔接用的、通過加熱器具進行的套筒熔融用的及與 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| BS ISO 8085-3 | 供應燃?xì)獾木垡蚁┕苁褂玫木垡蚁┕芗?米制系列.規范.電熔融管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Electrofusion fittings |
| BS ISO 8179-1 | 球墨鑄鐵管.外部鍍鋅.終飾層用金屬鋅 | Ductile iron pipes - External zinc-based coating - Metallic zinc with finishing layer |
| BS ISO 9349 | 預絕緣球墨鑄鐵管道系統 | Preinsulated ductile iron pipeline systems |
| 編號 | 中文名稱 | 英文名稱 |