微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/UL 2431 | 噴霧防火材料的耐久性 | Durability of Spray-Applied Fire Resistive Materials |
| ASTM C 1099 | 升溫時含碳耐火材料的斷裂模數用標準試驗方法 | Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures |
| ASTM C 1171 | 耐火材料熱沖擊效應和熱循環效應定量測量的標準試驗方法 | Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories |
| ASTM C 1223 | 玻璃熔析形式AZS熔鑄耐火材料試驗方法 | Test Method for Testing of Glass Exudation Form AZS Fusion-Cast Refractories |
| ASTM C 133 | 耐火材料的冷破碎強度和撓折模量的標準試驗方法 | Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories |
| ASTM C 135 | 用水浸法測定耐火材料的準確比重的標準試驗方法 | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM C 1419a | 室溫下耐火材料中的聲速及聲速在測量近似楊氏模量中的應用的標準試驗方法 | Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus |
| ASTM C 1445 | 用流動稠度試驗臺測量可澆注耐火材料粘稠度的標準試驗方法 | Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table |
| ASTM C 1446 | 自流式可澆鑄耐火材料的粘稠度測量用標準試驗方法 | Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories |
| ASTM C 1548 | 用振動的脈沖激勵法測試耐火材料動態楊式模量、剪切模量及泊松比的標準方法 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration |
| ASTM C 181 | 耐火粘土和高鋁塑性耐火材料可加工性指數的標準試驗方法 | Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories |
| ASTM C 201 | 耐火材料導熱性的標準試驗方法 | Standard Test Method for Thermal Conductivity of Refractories |
| ASTM C 288 | 在一個大氣壓的一氧化碳中耐火材料裂變的試驗方法 | Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide |
| ASTM C 401 | 可澆注耐火材料的分類方法 | Classification of Alumina and Alumina-Silicate Castable Refractories |
| ASTM C 417 | 未經焙燒的整塊耐火材料導熱性標準試驗方法 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 435 | 鋼澆鑄槽用耐火材料的分類 | Classification of Steel Pouring Pit Fireclay Refractories |
| ASTM C 454 | 用強堿法測定含碳耐火材料的破碎程度 | Disintegration of Carbon Refractories by Alkali |
| ASTM C 467 | 富鋁紅柱石耐火材料的標準分類 | Standard Classification of Mullite Refractories |
| ASTM C 545 | 鋯石耐火材料的標準分類 | Standard Classification of Zircon Refractories |
| ASTM C 577 | 耐火材料滲透性的標準試驗方法 | Standard Test Method for Permeability of Refractories |
| ASTM C 583 | 高溫下耐火材料破裂模數的標準試驗方法 | Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures |
| ASTM C 604 | 用氣體比重法測定耐火材料真實比重的標準試驗方法 | Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
| ASTM C 621 | 熔融玻璃耐火材料耐等溫腐蝕的標準試驗方法 | Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass |
| ASTM C 673 | 耐火粘土及高礬土的塑性耐火材料及搗實混合物的標準分類 | Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes |
| ASTM C 71a | 耐火材料標準術語 | Standard Terminology Relating to Refractories |
| ASTM C 767 | 炭精耐火材料導熱率的標準試驗方法 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM C 830 | 用真空壓力法測定成型耐火材料表觀空隙率、吸水性、表觀比重和體密度的標準試驗方法 | Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
| ASTM C 832 | 測量在負荷作用下耐火材料的熱膨脹和蠕變的標準試驗方法 | Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load |
| ASTM C 863 | 高溫時評定碳化硅耐火材料抗氧化性的標準試驗方法 | Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures |
| ASTM C 874 | 耐火材料的旋轉熔渣標準實施規范 | Standard Practice for Rotary Slag Testing of Refractory Materials |
| ASTM C 899 | 報告耐火材料性能測量用米制單位應用標準規程 | Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380) |
| ASTM C 914 | 用浸蠟法測定固體耐火材料的松密度和體積的標準試驗方法 | Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion |
| ASTM C 92 | 耐火材料篩析和含水量的標準試驗方法 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM C 987a | 爐上層結構用耐火材料的蒸氣沖擊標準實施規范 | Standard Practice for Vapor Attack on Refractories for Furnace Superstructures |
| ASTM E 1513 | 噴涂耐火材料的應用(SFRMs) | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 605 | 噴涂到結構件上耐火材料厚度和密度的試驗方法 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 736 | 結構構件上噴涂的防火材料的粘附性/粘結性的標準試驗方法 | Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
| ASTM E 759 | 撓曲對結構構件上噴涂的防火材料影響的試驗方法 | Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members |
| ASTM E 760 | 沖擊結構構件上噴涂防火材料粘著力影響的試驗方法 | Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members |
| ASTM E 761 | 結構構件上噴涂防火材料抗壓強度的試驗方法 | Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members |
| ASTM E 859 | 結構構件上噴涂防火材料的空氣腐蝕的試驗方法 | Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members |
| ASTM E 937 | 結構構件上噴涂防火材料對鋼腐蝕性的試驗方法 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| 編號 | 中文名稱 | 英文名稱 |