微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI A10.12 | 挖土的安全要求 | Safety Requirements for Excavation |
| ANSI A10.13 | 鋼結構安裝的安全要求 | Safety Requirements for Steel Erection |
| ANSI A10.15 | 建筑施工和拆除工作.挖泥作業的安全要求 | Construction and Demolition Operations - Dredging, Safety Requirements for |
| ANSI A10.16 | 建筑施工和拆除工作.隧道、豎井和藻井的安全要求 | Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons |
| ANSI A10.18 | 建筑施工和拆除工作.臨時腳踏板和墻口、樓梯和其他無保護邊緣的安全要求 | Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges |
| ANSI A10.20 | 瓷磚、水磨石和大理石作業的安全要求 | Safety Requirements for Ceramic Tile, Terrazo, and Marble Work |
| ANSI A10.22 | 帶導向繩索和非導向繩索的載人用升降機.安全要求 | Rope-Guided and Nonguided Worker's Hoists - Safety Requirements |
| ANSI A10.24 | 屋面材料.低斜坡屋面的安全要求 | Roofing - Safety Requirements for Low-Sloped Roofs |
| ANSI A10.27 | 熱混瀝青設備的安全要求 | Safety Requirements for Hot Mix Asphalt Facilities |
| ANSI A10.28 | 起重機或轉臂起重機的懸吊工作平臺.安全要求 | Work Platforms Suspended from Cranes or Derricks - Safety Requirements |
| ANSI A10.32 | 建設和拆毀工作中防人員跌落的安全要求 | Personal Fall Protection Safety Requirements for Construction, Demolition Operations |
| ANSI A10.4 | 載人升降機和雇員用電梯的安全要求 | Safety Requirements for Personnel Hoists and Employee Elevators |
| ANSI A10.7 | 建筑施工和拆除.商業炸藥和起爆劑.運輸、存儲、裝卸和使用的安全要求 | Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use |
| ANSI A10.8 | 腳手架的安全要求 | Safety Requirements for Scaffolding |
| ANSI A14.1 | 樓梯.便攜式木梯的安全要求 | Ladders - Portable Wood, Safety Requirements for |
| ANSI A14.2 | 便攜式金屬梯的安全要求 | Portable Metal Ladders, Safety Requirements for |
| ANSI A14.3 | 木梯.固定安全要求 | Ladders - Fixed - Safety Requirements |
| ANSI A14.4 | 工地用木梯的安全要求 | Job-Made Wooden Ladders, Safety Requirements for |
| ANSI A14.5 | 樓梯.便攜式增強塑料的安全要求 | Ladders - Portable Reinforced Plastic - Safety Requirements |
| ANSI A14.9 | 吊裝暗式爬高系統的安全要求 | Safety Requirements for Ceiling Mounted Disappearing Climbing Systems |
| ANSI ASBZ 50.1 | 面包店設備.安全要求 | Bakery Equipment - Safety Requirements |
| ANSI ATIS0300276.a | 操作、管理、維護和保障.公共通信網絡的安全要求:作為阻止有害通信的包過濾附加要求的管理平面用安全要求基 | Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane, to add requirements to support Packet Filtering for the Prevention of Unwanted Traffic |
| ANSI B11.1 | 機床.機械動力壓力機.制造、維護和使用的安全要求 | Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use |
| ANSI B11.10 | 金屬鋸床的制造、維護和使用的安全要求 | Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of |
| ANSI B11.11 | 齒輪切割機的制造、維護和使用的安全要求 | Gear Cutting Machines, Safety Requirements for the Construction, Care, and Use of |
| ANSI B11.12 | 機床.滾軋成型和滾軋彎曲機床.制造、維護和使用的安全要求 | Machine Tools - Roll-Forming and Roll-Bending Machines - Safety Requirements for the Construction, Care, and Use |
| ANSI B11.13 | 機床.單軸、多軸自動棒材、卡盤機床.制造、維護和使用的安全要求 | Machine Tools - Single- and Multiple-Spindle Automatic Bar and Chucking Machines - Safety Requirements for Construction, Care and Use |
| ANSI B11.14 | 機床.卷材縱向切分機的制造、維護和使用的安全要求 | Machine Tools - Coil-Slitting Machines Safety Reqirements for Construction, Care, and Use |
| ANSI B11.15 | 管道和型材彎曲機的制造、維護和使用的安全要求 | Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use |
| ANSI B11.16 | 粉末/金屬壓力機的安全要求 | Safety Requirements for Powder / Metal Compacting Presses |
| ANSI B11.17 | 機床.臥式液力擠壓機的制造、維護和使用的安全要求 | Machine Tools - Horizontal Hydraulic Extrusion Presses,- Safety Requirements for Construction, Care, and Use |
| ANSI B11.20 | 機床.生產系統/元件.制造、維護和使用的安全要求 | Machine Tools - Manufacturing Systems/Cells - Safety Requirements for Construction, Care, and Use |
| ANSI B11.22 | 旋轉中心和自動數控旋轉機器的安全要求 | Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines |
| ANSI B11.23 | 組合加工中心機床和自動數控銑床、鉆床和鏜床的安全要求 | Safety Requirements for Machining Centers and Automatic Numerically Controlled Milling, Drilling and Boring Machines |
| ANSI B11.24 | 轉印機的安全要求 | Safety Requirements for Transfer Machines |
| ANSI B11.3 | 動力壓力制動器的制造、維護和使用的安全要求 | Power Press Brakes, Safety Requirements for the Construction, Care, and Use of |
| ANSI B11.4 | 機床.剪床的安全要求 | Machine Tools - Safety Requirements for Shears |
| ANSI B11.5 | 機床.鋼鐵制品.制造、維護和使用的安全要求 | Machine Tools - Ironworkers - Safety Requirements for Construction, Care and Use |
| ANSI B11.6 | 車床的制造、維護和使用的安全要求 | Lathes, Safety Requirements for the Construction, Care, and Use of |
| ANSI B11.8 | 鉆床、銑床和鏜床的制造、維護和使用的安全要求 | Drilling, Milling, and Boring Machines, Safety Requirements for the Construction, Care, and Use of |
| ANSI B11.9 | 機床.磨床的制造、維護和使用的安全要求 | Safety Requirements for the Construction, Care and Use of Grinding Machines |
| ANSI B151.15 | 塑料機械.擠注吹塑機.制造,維護和使用的安全要求 | Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Construction, Care and Use |
| ANSI B154.1 | 鉚接設備制造、維護和使用的安全要求 | Rivet Setting Equipment, Safety Requirements for Construction, Care, and Use of |
| ANSI B165.1 | 電動工具.電驅動涂刷工具.設計、保養和使用的安全要求 | Power Tools - Power-Driven Brushing Tools - Safety Requirements for Design, Care, and Use |
| ANSI B175.1 | 汽油動力鏈鋸的安全要求 | Gasoline Powered Chain Saws, Safety Requirements for |
| ANSI B175.4 | 便攜式、手持式、內燃機驅動切割機的安全要求 | Portable, Handheld, Internal Combustion Engine Driven Cut-Off Machines - Safety Requirements |
| ANSI B65.2 | 圖形技術.裝訂及精整系統和設備的安全要求 | Graphic technology - Safety requirements for binding and finishing systems and equipment |
| ANSI B7.7 | 涂磨料的研磨材料的安全要求 | Safety Requirements for Abrading Materials with Coated Abrasives Systems |
| ANSI B71.4 | 商用草皮維護設備.安全要求 | Commercial Turf Care Equipment - Safety Specifications |
| ANSI B77.2 | 纜車.安全要求 | Funiculars - Safety Requirements |
| ANSI K61.1 | 無水氨存儲和搬運的安全要求 | Safety Requirements for the Storage and Handling of Anhydrous Ammonia |
| ANSI MH29.2 | 工業用傾斜架的安全要求 | Safety Requirements for Industrial Tilters |
| ANSI O1.1 | 木工機械.安全要求 | Woodworking Machinery - Safety Requirements |
| ANSI PH3.61 | 消費者用攝影幻燈片放映機的安全要求 | Safety Requirements for Photographic Slide Projectors for Consumer Use |
| ANSI SNT 101 | 動力工具.便攜式壓縮空氣驅動的緊固件旋入工具的安全要求 | Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for |
| ANSI SNT-101 | 動力工具.便攜式壓縮空氣驅動的緊固驅動工具.安全要求 | Power Tools - Portable, Compressed-Air-Actuated, Fastener Driving Tools - Safety Requirements for |
| ANSI SNT101 | 動力工具.便攜式壓縮空氣驅動的緊固件旋鋸安全要求 | Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for |
| ANSI T1.276 | 操作、管理、維護和保障.公用電信網的安全要求:管理面的安全要求基線 | Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane |
| ANSI Z117.1 | 有限空間的安全要求 | Safety Requirements for Confined Spaces |
| ANSI Z244.1 | 能源的切斷/警告標記的安全要求 | Lock Out/Tag Out of Energy Sources, Safety Requirements for the |
| ANSI Z245.1 | 垃圾的收集、處理和處置設備.移動式垃圾收集和壓實設備.安全要求 | Refuse Collection, Processing, and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment - Safety Requirements |
| ANSI Z245.2 | 廢物和可循環材料用設備技術和運行.固定式壓縮機.安全要求. | Equipment Technology and Operations for Wastes and Recyclable Materials -Stationary Compactors - Safety Requirements |
| ANSI Z245.30 | 垃圾的收集、處理和處置設備.垃圾箱.安全要求 | Refuse Collection, Processing, and Disposal Equipment - Waste Containers - Safety Requirements |
| ANSI Z245.41 | 廢物和可循環材料的設備技術和運行.混合可再循環材料的加工設施.安全要求 | Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials - Safety Requirements |
| ANSI Z245.5 | 廢物和可循環材料的設備技術和運行.打包設備.安全要求 | Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements |
| ANSI Z8.1 | 商業洗衣房和干洗操作.安全要求 | Commercial laundry and drycleaning operations - Safety requirements |
| ANSI/ALI ALIS | 自動提升機.安裝和運行的安全要求 | Automotive Lifts - Safety Requirements for Installation and Service |
| ANSI/ALI ALOIM | 自動電梯.操作、檢測和維護的安全要求 | Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance |
| ANSI/ALI B153.1 | 自動升降機.建造、保養和使用的安全要求 | Automotive Lifts - Safety Requirements for the Construction, Care, and Use |
| ANSI/ASME B107.41M | 釘錘.安全要求 | Nail Hammers - Safety Requirements |
| ANSI/ASME B107.42M | 手斧.安全要求 | Hatchets - Safety Requirements |
| ANSI/ASME B107.43M | 木材劈裂楔.安全要求 | Wood Splitting Wedges - Safety Requirements |
| ANSI/ASME B107.44M | 玻璃匠鑿和木工鑿.安全要求 | Glaziers' Chisels and Wood Chisels - Safety Requirements |
| ANSI/ASME B107.45M | 細長鑿和地板/電工用鑿.安全要求 | Ripping Chisels and Flooring/Electricians' Chisels - Safety Requirements |
| ANSI/ASME B107.46M | 螺柱、螺釘和管取出器.安全要求 | Stud, Screw and Pipe Extractors - Safety Requirements |
| ANSI/ASME B107.48 | 金屬鑿、鑿孔機和沖釘:安全要求 | Metal Chisels, Punches, and Drift Pins: Safety Requirements |
| ANSI/ASME B107.49M | 釘子.安全要求 | Nail Sets - Safety Requirements |
| ANSI/ASME B107.50M | 手工工具.磚鑿和劈磚枕墊.安全要求 | Hand Tools - Brick Chisels and Brick Sets - Safety Requirements |
| ANSI/ASME B107.51 | 星形鉆頭.安全要求 | Star Drills - Safety Requirements |
| ANSI/ASME B107.52M | 拔釘器棒.安全要求 | Nail-Puller Bars - Safety Requirements |
| ANSI/ASME B107.53M | 手工工具.圓頭錘.安全要求 | Hand Tools - Ball Peen Hammers - Safety Requirements |
| ANSI/ASME B107.54 | 重擊工具.安全要求 | Heavy Striking Tools - Safety Requirements |
| ANSI/ASME B107.56 | 殼體修理錘和墊塊:安全要求 | Body Repair Hammers and Dolly Blocks: Safety Requirements |
| ANSI/ASME B107.58M | 鉚錘、敲除水垢用錘和錫工用小錘.安全要求 | Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements |
| ANSI/ASSE A10.5 | 物料升降機安全要求 | Safety Requirements for Material Hoists |
| ANSI/ASTM F2173 | 監測病人呼吸混合物的氧監測器.安全要求 | ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements |
| ANSI/ASTM F2265 | 醫用抽吸設備.第1部分:電動抽吸設備.安全要求 | Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements |
| ANSI/HTI B173.4 | 斧子.安全要求 | Axes - Safety Requirements |
| ANSI/HTI B173.8 | 鉚接、定標和白鐵工鉚釘錘.安全要求 | Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements |
| ANSI/HTI B209.2 | 手工工具.金屬沖頭和尖沖釘.安全要求 | Hand Tools - Metal Punches and Drift Pins - Safety Requirements |
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US | 測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements |
| ANSI/ISA S82.02.02 | 測量、控制和實驗室用電氣設備的安全要求 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use |
| ANSI/ISA S82.02.04 | 測量、控制和實驗室用電氣設備的安全要求.第2-032部分:電測量和試驗用手持電流線夾的特殊要求 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test |
| ANSI/NFPA 70E | 員工工作場所的電氣安全要求 | Electrical Safety Requirements for Employee Workplaces |
| ANSI/SPI B151.1 | 塑料機械.臥式注射成型機.制造、維護和使用的安全要求 | Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use |
| ANSI/SPI B151.27 | 塑料機械.與臥式注射成型機一起使用的機器人.集成、維護和使用的安全要求 | Plastics Machinery - Robots Used with Horizontal Injection Molding Machines - Safety Requirements for the Integration, Care, and Use |
| ANSI/SPI B151.29 | 垂直夾緊注模機的制造、保養和使用安全要求 | Safety Requirements for the Manufacture, Care and Use of Vertical Clamp Injection Molding Machines |
| ANSI/TIA-102AACA-1 | 項目25.數字無線電發射密鑰更換(OTAR)協議.修改件1.第3類分組加密算法的密鑰管理安全要求 | Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms |
| ANSI/TIA/EIA 102AACA-1 | 項目25.數字無線電遠程再加密(OTAR)協議.附錄1.類型3塊加密算法的密鑰管理安全要求 | Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms |
| ANSI/UL 1709 | 結構鋼防護材料的快速升溫燃燒試驗的安全要求 | Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel |
| ANSI/UL 60065 | 音頻、視頻與類似電子儀器.安全要求 | Audio, Video and Similar Electronic Apparatus - Safety Requirements |
| ASME A120.1 | 建筑物維修用電動升降平臺的安全要求 | (Safety requirements for powered platforms for building maintenance) |
| ASME A39.1 Interpretations-199 | 窗戶清洗的安全要求.說明 | (Interpretations: Safety requirements for window cleaning) |
| ASME A39.1 | 窗戶清洗的安全要求 | (Safety requirements for window cleaning) |
| ASME A39.1b Addenda | 窗戶清洗的安全要求.附錄 | (Safety requirements for window cleaning; Addenda) |
| ASME B107.51 | 星形鉆頭.安全要求 | (Star drills - Safety requirements) |
| ASME B107.55 | 斧子.安全要求 | (Axes - Safety Requirements) |
| ASTM ANS/ISO 10079-1 | 醫療吸引設備.第1部分:電動吸引設備.與美國國家標準有偏差的ASTM國際標準認可的安全要求 | Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Approved as an American National Standard with Deviations by ASTM International |
| ASTM ANS/ISO 7767 | 與美國國家標準有偏差的ASTM國際標準認可的監視病人呼吸混合物的氧氣監視器的安全要求 | Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements Approved as an American National Standard with Deviations by ASTM International |
| ASTM E 2349 | 金屬鑄造操作中安全要求的標準實施規程:型砂制備、制模和制型心;熔化和灌注;清潔和精整 | Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing |
| ASTM F 1208 | 麻醉呼吸系統的最低性能和安全要求用標準規范 | Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems |
| ASTM F 920 | 人用復蘇器的最低性能和安全要求 | Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans |
| ASTM/ISO 10079-1 | 醫療抽吸設備.第1部分:電動抽吸設備.安全要求 | Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements |
| ASTM/ISO 7767 | 監控病人呼吸混合物的氧分析儀的安全要求 | Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements |
| UL 60065 | 音頻、視頻及類似電子設備.安全要求 | (Audio, video and similar electronic apparatus - Safety requirements) |
| 編號 | 中文名稱 | 英文名稱 |