微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI S2.31 | 機械靈活性的實驗測定方法:第1部分:基本定義和傳感器 | Methods for the experimental determination of mechanical mobility - Part 1: Basic definitions and transducers |
| ANSI S2.46 | 對地震傳感器應規定的特性 | Characteristics to be specified for seismic transducers |
| ANSI/ASTM D3763 | 載荷-位移傳感器測定塑料高速刺穿特性的方法(08.03) | Plastics Using Load and Displacement Sensors, Test Method for High-Speed Puncture Properties of (08.03) |
| ANSI/ASTM D5000 | 利用測流傳感器對粘土元素進行活性評估的實施規程 | Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor |
| ANSI/ASTM F2174 | 聲發射傳感器響應的驗證慣例 | Practice for Verifying Acoustic Emmission Sensor Response |
| ANSI/IEEE 1309 | 9KHz-40GHz電磁場傳感器和探針的校正標準(天線除外) | Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz |
| ANSI/IEEE 1451.0 | 傳感器和傳動裝置用智能傳感器接口的標準.通用功能、通訊協議和傳感器電子數據表(TEDS)格式 | Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats |
| ANSI/IEEE 1451.1 | 傳感器和致動器智能傳感器接口標準.網絡能力應用處理機(NCAP)的信息模型 | Standard for a Smart Transducer Interface for Sensors and Actuators - Network Capable Application Processor (NCAP) Information Model |
| ANSI/IEEE 1451.3 | 傳感器和傳動裝置用智能傳感器接口標準.分布式多點系統用數字通信和傳感器電子數據表格式(TEDS) | Standard for a Smart Transducer Interface for Sensors and Actuators - Digital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems |
| ANSI/IEEE 1451.4 | 傳感器和致動器用智能轉換器接口標準.混合式通信協議和轉換器電子數據表單(TEDS)格式 | Standard for a Smart Transducer Interface for Sensors and Actuators - Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats |
| ANSI/IEEE 1451.5 | 傳感器和傳動裝置用智能傳感器接口的標準.無線通信協議和傳感器電子數據表(TEDS)格式 | Standard for a Smart Transducer Interface for Sensors and Actuators - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats |
| ANSI/IEEE 1554 | 慣性傳感器試驗設備、儀器、數據獲取和分析的推薦實施規程 | Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis |
| ANSI/IEEE 1554-200x | 慣性傳感器試驗設備、儀器、數據獲取和分析的推薦實施規程 | Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis |
| ANSI/IEEE 475 | 300MHz～40GHz現場干擾傳感器用標準測量程序 | Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
| ANSI/IEEE 528 | 慣量傳感器術語標準 | Standard for Inertial Sensor Terminology |
| ANSI/IEEE 671 | 無陀螺慣性角加速傳感器規范格式指南和試驗程序:沖擊、加速度、速度和位移 | Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement |
| ANSI/IEEE C37.92 | 保護電壓和電流傳感器中繼電器的模擬輸入標準 | Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers |
| ANSI/TIA-455-B | 光纖、光纜、傳感器、感應器、連接和端接設備以及其他光纖元部件的標準試驗程序 | Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components |
| ANSI/TIA/EIA 455-B | 光纖、光纜、變換器、傳感器、連接和終端裝置及其他光纖元件的標準試驗程序 | Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components |
| ANSI/UL 2075 | 氣體和蒸氣探測器和傳感器 | Gas and Vapor Detectors and Sensors |
| ASME MC 88.1 | 壓力傳感器的動態校準導則 | (A guide for the dynamic calibration of pressure transducers) |
| ASTM C 1130 | 微型熱流量傳感器校正的標準實施規程 | Standard Practice for Calibrating Thin Heat Flux Transducers |
| ASTM D 3763 | 用載荷和位移傳感器測試塑料的高速穿孔特性的標準試驗方法 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM D 5000 | 使用側流傳感器評定粘土元素活性的標準實施規程 | Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor |
| ASTM D 5720 | 土工用電子傳感器型壓力測量系統靜態校準標準規程 | Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes |
| ASTM D 6176M | 用電阻溫度傳感器(米制)測量表面大氣溫度的標準操作規程 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric) |
| ASTM D 7191 | 用相對濕度傳感器測定塑料中濕度的標準試驗方法 | Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
| ASTM D 7192 | 用載荷傳感器和位移傳感器測定塑料薄膜高速擊穿特性的標準試驗方法 | Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors |
| ASTM D 7203 | 使用加熱的二極管傳感器篩分三氯乙烯污染物的標準試驗方法 | Standard Test Method for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor |
| ASTM D 7310 | 用光學傳感器進行塑料薄膜缺陷檢測和評定等級用標準指南 | Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors |
| ASTM E 1106 | 聲發射傳感器一次校準的標準試驗方法 | Standard Test Method for Primary Calibration of Acoustic Emission Sensors |
| ASTM E 1774 | 電磁聲學傳感器用標準指南 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1781 | 聲發射傳感器的二次校準標準規程 | Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
| ASTM E 1855 | 作為中子光譜傳感器和位移損壞監測器的2N2222A硅雙極晶體管的使用的標準試驗方法 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
| ASTM E 2075 | 用丙烯酸桿檢驗AE傳感器響應一致性的標準實施規程 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 2338 | ASTM E 2338-2006Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Se | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 2415 | 壓電公路交通傳感器的安裝的標準實施規程 | Standard Practice for Installing Piezoelectric Highway Traffic Sensors |
| ASTM E 2439 | 法醫心理生理欺騙檢測(測謊)中使用的儀器、傳感器和操作軟件的標準指南 | Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations |
| ASTM E 650 | 安裝壓電聲發射傳感器 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 844 | 反應堆監視用傳感器裝置設計和輻照的標準指南E-706(ⅡC) | Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC) |
| ASTM E 976 | 測定聲發射傳感器響應再現性的標準指南 | Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
| ASTM F 1249 | 利用調制紅外線傳感器的水蒸氣透過塑料薄膜和薄板的穿透率的標準試驗方法 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM F 1307 | 用電量傳感器測定固體包裝件氧傳輸率的標準試驗方法 | Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor |
| ASTM F 1308 | 食品用微波傳感器中易揮發可萃取物量化的測試方法 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM F 2174 | 檢驗聲音傳播傳感器響應的標準實施規程 | Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM F 2537 | 用于測量微移動用直線位移傳感器系統的刻度標準實施規范 | Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| ASTM F 2595 | 無人潛水器(UUV)傳感器數據格式用標準指南 | Standard Guide for Unmanned Undersea Vehicle (UUV) Sensor Data Formats |
| IEEE 1309 | 頻率為9KHz～40GHz的電磁傳感器和探針,不包括天線 | (Calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz) |
| IEEE 1451.1 | 傳感器和驅動器傳感界面標準.網絡能力應用程序(NCAP)的信息模式 | (Standard for a smart transducer interface for sensors and actuators - Network capable application processor (NCAP) information model) |
| IEEE 475 | 300 MHz-40 GHz場干擾傳感器的測量程序 | (Measurement procedure for field disturbance sensors 300 MHz to 40 GHz) |
| IEEE 528 | 慣性傳感器術語 | (Inertial Sensor Terminology) |
| IEEE 671 | 非回轉慣性角度傳感器急跳、加速度、速度和位移的規范格式指南 | (Specification format guide and test procedure for nongyroscopic inertial angular sensors; jerk, acceleration, velocity, and displacement) |
| 編號 | 中文名稱 | 英文名稱 |