微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0600003 | 蓄電池外殼及其空間/面積 | Battery Enclosures and Rooms/Areas |
| ANSI C18.1M Part 1 | 干電池和電池組.規范 | Dry Cells and Batteries - Specifications |
| ANSI C18.1M Part 2 | 有水溶電解質的便攜式原電池和蓄電池組.安全標準 | Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard |
| ANSI C18.1M | 干電池和蓄電池的規范 | Dry Cells and Batteries - Specifications |
| ANSI C18.2M Part 1 | 便攜式可充電電池用標準.總則和規范 | Standard for Portable Rechargeable Cells and Batteries - General and Specifications |
| ANSI C18.2M Part 2 | 便攜式可再充電電池.安全標準 | Portable Rechargeble Cells and Batteries - Safety Standard |
| ANSI C18.2M | 電池組.密封可再充電的鎳鎘圓柱形裸露的和有外殼的蓄電池 | Batteries - Sealed Rechargeable (Secondary) Nickel-Cadmium Cylindrical Bare Cells and Jacketed Batteries |
| ANSI C18.3M Part 1 | 便攜式鋰原電池和電池組.總則和規范 | Portable Lithium Primary Cells and Batteries - General and Specifications |
| ANSI C18.3M Part 2 | 便攜式鋰原電池和蓄電池.安全標準 | Portable Lithium Primary Cells and Batteries - Safety Standard |
| ANSI C18.3M | 原電池.鋰原電池.規范 | Primary Batteries - Lithium Primary Batteries - Specifications |
| ANSI PH3.51 | 攝影用立方閃光燈(電池控制)的尺寸 | Dimensions for Photographic Flashcubes (Battery Operated) Correction - April 1973 |
| ANSI PH3.58 | 攝影用大功率立方閃光燈(電池控制)的尺寸 | Dimensions for Photographic High-Power Cubes (Battery Operated) |
| ANSI T1.330 | 電信.電信環境用的閥調的鉛酸電池 | Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment |
| ANSI T1.405 | 電信.網絡與用戶裝置接口.利用環路反向電池信令的直接向內撥號模擬音頻轉換訪問線路 | Telecommunications -Installation Interfaces - Direct-Inward-Dialing Analog Voicegrade Switched Access Using Loop Reverse-Battery Signaling |
| ANSI T1.411 | 電信.網絡與用戶裝置接口.使用網絡提供的反向電池信令的模擬音頻增強型911轉換訪問線路 | Telecommunications - Network-to-Customer Installation Interfaces - Analog Voicegrade Enhanced 911 Switched Access Using Network-Provided Reverse-Battery Signaling |
| ANSI T1.411a Supplement | 電信.載體和用戶裝置之間的接口.用網絡提供的蓄電池信令發送進行模擬聲音級增強的911轉換存取.補充件 | Telecommunications - Interface between carriers and customer installations - Analog voicegrade enhanced 911 switched access using network-provided reserve-battery signaling; Supplement |
| ANSI T1.414 | 電信.網絡與用戶裝置接口.使用環路反向電池信令的增強型模擬音頻PSAP訪問線路 | Telecommunications - Network to Customer Installation Interfaces - Enhanced 911 Analog Voicegrade PSAP Access Using Loop Reverse-Battery Signaling |
| ANSI/ASME PTC50 | 燃料電池動力系統性能 | Fuel Cell Power Systems Performance |
| ANSI/ASTM D7148 | 用電解槽測量系統中用碳極測定堿性蓄電池隔板的離子(電阻率)用試驗方法 | Test Method for Determining the Ionic (resistivity) (er) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
| ANSI/ASTM E1021 | 光伏電池光譜響應的測量方法 | Test Methods for Measuring the Spectral Response of Photovoltaic Cells |
| ANSI/ASTM E1036/E 1036M | 利用比對電池測定非濃縮地面光伏電池模擬器電特性的方法(米制) | Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (Metric) |
| ANSI/ASTM E1039 | 球面發光條件下校準和表征非濃縮地面光伏比對電池特性試驗方法 | Test Method for Calibration and Characterization of Non-Concentrator Terrestrial Photovoltaic Reference Cells Under Global Irradiation |
| ANSI/ASTM E1125 | 利用平行光譜校準初級非濃縮地面光伏比對電池的試驗方法 | Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovolatic Reference Cells Using a Tabular Spectrum |
| ANSI/ASTM E1362 | 非濃縮光伏副基準比對電池校準試驗方法 | Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ANSI/ASTM E1596 | 光伏電池模擬器太陽能輻射風化試驗方法 | Test Method for Solar Radiation Weathering of Photovoltaic Modules |
| ANSI/ASTM E1597 | 海洋環境用光伏電池模擬器鹽水浸沒壓力和溫度測試方法 | Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments |
| ANSI/ASTM E2047 | 光伏電池陣列絕緣完整性試驗方法 | Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays |
| ANSI/ASTM E948 | 利用比對電池進行非濃縮地面光伏電池的電特性的方法 | Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Cells Using Reference Cells |
| ANSI/ASTM E973M | 光伏器件和光伏比對電池光譜失配參數測定方法 | Test Method for Determination of the Spectral Mismatch Parameter between a Photovoltaic Device and a Photovoltaic Reference Cell (Metric) |
| ANSI/CSA AmericaFC 1 | 燃料電池動力裝置 | Fuel Cell Power Plants (same as CGA 12.10) |
| ANSI/CSA FC3 | 便攜式燃料電池動力系統 | Portable Fuel Cell Power Systems |
| ANSI/EIA 540J000 | 電子設備用電池支架的分規范 | Sectional Specification for Battery Holders for Use in Electronic Equipment |
| ANSI/EIA 540J0AA | 電子設備用的圓柱形電池支架標準外形的詳細規范 | Detail Specification for Cylindrical Battery Holders, Standard Profile, for use in Electronic Equipment |
| ANSI/EIA 540J0AB | 用于電子設備的幣式電池座的詳細規范 | Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment |
| ANSI/EIA-540J000 | 電子設備用蓄電池座分規范 | Sectional Specification for Battery Holders for Use in Electronic Equipment |
| ANSI/EIA-540J0AA | 電子設備用圓柱形電池安裝座，標準形狀詳細規范 | Detail Specification for Cylindrical Battery Holders, Standard Profile, for use in Electronic Equipment |
| ANSI/EIA-540J0AB | 電子設備用硬幣式蓄電池座詳細規范 | Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment |
| ANSI/IEEE 1013 | 單機光電(PV)系統用酸性鉛蓄電池尺寸選定的推薦實施規程 | Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems |
| ANSI/IEEE 1106 | 固定設施用帶泄漏口的鎳鎘蓄電池組的安裝、維護、測試及更換的推薦實施規程 | Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications |
| ANSI/IEEE 1115 | 固定電池組用鎳鎘蓄電池組規格選擇 | Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications |
| ANSI/IEEE 1184 | 不可間斷電源系統用電池的指南 | Guide for Batteries for Uninterruptible Power Supply Systems |
| ANSI/IEEE 1187 | 固定用途的閥調節鉛酸蓄電池的安裝設計和安裝的推薦實施規程 | Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications |
| ANSI/IEEE 1188 | 固定設備用的閥調節鉛酸蓄電池的維修、試驗和更換的推薦實施規程 | Recommended Practice for Maintenance, Testing and Replacement of Valve Regulated Lead-Acid Batteries for Stationary Applications |
| ANSI/IEEE 1189 | 固定設備用的閥調節鉛酸(VRLA)蓄電池的選擇指南 | Guide for the Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Application |
| ANSI/IEEE 1361 | 獨立的光電系統中使用的鉛酸蓄電池的選擇、充電、試驗和評定指南 | Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems |
| ANSI/IEEE 1375 | 固定蓄電池組系統的保護指南 | Guide for Protection of Stationary Battery Systems |
| ANSI/IEEE 1491 | 固定裝置中選擇和使用蓄電池監控設備的指南 | Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
| ANSI/IEEE 1536 | 鐵路運輸車輛蓄電池物理接口標準 | Standard for Rail Transit Vehicle Battery Physical Interface |
| ANSI/IEEE 1568 | 鐵路客運工具用鎳鎘蓄電池電量大小的推薦規程 | Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles |
| ANSI/IEEE 1578 | 固定蓄電池電解質溢出處理和管理的推薦實施規程 | Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
| ANSI/IEEE 1625 | 便攜式計算機用可再充電電池 | Rechargeable Batteries for Portable Computing |
| ANSI/IEEE 1725 | 移動電話用可再充電電池標準 | Standard for Rechargeable Batteries for Cellular Telephones |
| ANSI/IEEE 450 | 發電站和變電站的大型鉛蓄電池組的維護、試驗和更換實施規程 | Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations, Practice for |
| ANSI/IEEE 463 | 電解電池線性工作區的電氣安全規程標準 | Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
| ANSI/IEEE 484 | 固定設備用大型鉛酸蓄電池組安裝設計和安裝的實施規程 | Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
| ANSI/IEEE 485 | 固定裝置用的鉛酸電池規格選擇的推薦實施規程 | Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
| ANSI/IEEE 535 | 核電站用1E類鉛蓄電池的合格證明標準 | Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations |
| ANSI/IEEE 937 | 光電(PV)系統用鉛酸蓄電池組安裝和維護實施規程 | Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems |
| ANSI/SAE J1494 | 蓄電池升壓器電纜 | Battery Booster Cables |
| ANSI/SAE J1495 | 蓄電池阻燃通風系統的試驗程序 | Test Procedure for Battery Flame Retardant Venting Systems |
| ANSI/SAE J1766 | 電動和混合電動車蓄電池系統的推薦實施規程.碰撞完整性試驗 | Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems - Crash Integrity Testing |
| ANSI/SAE J2380 | 電動車蓄電池組的振動試驗 | Vibration Testing of Electric Vehicle Batteries |
| ANSI/SAE J240 | 汽車蓄電池的壽命試驗 | Automotive Storage Batteries, Life Test for |
| ANSI/SAE J537 | 蓄電池組 | Storage Batteries |
| ANSI/SCTE 48-3 | 用GTEM電池測量編織同軸引入電纜的屏蔽效果的試驗規程 | Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell |
| ANSI/UL 1236 | 裝載發電機啟動器蓄電池用蓄電池充電器的安全標準 | Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries |
| ANSI/UL 1564 | 工業蓄電池充電裝置安全標準 | Standard for Safety for Industrial Battery Chargers |
| ANSI/UL 1839 | 汽車蓄電池電瓶線的安全標準 | Standard for Safety for Automotive Battery Booster Cables |
| ANSI/UL 218A | 柴油發動機驅動的離心消防泵用蓄電池接觸器 | Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps |
| ANSI/UL 2267 | 工業電瓶貨車設備用燃料電池電源系統安全標準 | Standard for Safety for Fuel Cell Power Systems for Installation in Industrial Electric Trucks |
| ANSI/UL 583 | 工業用蓄電池電力貨車標準 | Standard for Electric-Battery-Powered Industrial Trucks |
| ANSI/UL 745-4-36 | 電池組手動工具的特殊要求安全標準 | Standard for Safety for Particular Requirements for Battery Operated Hand Motor Tools |
| ASME PTC 50 | 燃料電池電源系統性能 | (Fuel cell power systems performance) |
| ASTM C 876 | 混凝土中未涂覆的預應力鋼筋的半電池電勢的試驗方法 | Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM D 7129 | 接合蓄電池隔板中氨的測定的標準試驗方法 | Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator |
| ASTM D 7131 | 接合蓄電池隔板中離子交換能力測定的標準試驗方法 | Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator |
| ASTM D 7148 | 電解槽測量系統中使用碳極測定堿性蓄電池隔板的離子電阻系數(ER)用標準試驗方法 | Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
| ASTM E 1036 | 使用標準電池的非聚能地面光電模件和陣列電氣性能的標準試驗方法 | Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM E 1040 | 非集中大地光電參比電池物理特性的標準規范 | Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells |
| ASTM E 1125 | 用表列光譜校準初級非集中大地光電參比電池的標準試驗方法 | Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum |
| ASTM E 1362 | 非集中光電二次參比電池校準的標準試驗方法 | Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ASTM E 2236a | 無聚集器多結光電池和組件的電性能和光譜靈敏度測量的標準試驗方法 | Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules |
| ASTM E 948a | 在模擬日光下使用參比電池的光電電池電性能的標準試驗方法 | Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight |
| ASTM E 973a | 測定光電裝置與光電參比電池之間光譜不協調參數的標準試驗方法 | Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell |
| ASTM G 95 | 管道涂層的陰極剝離試驗用標準試驗方法(附著電池法) | Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |
| IEEE 1013 | 光電系統用鉛酸蓄電池尺寸測量的推薦實施規程 | (Recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems) |
| IEEE 1106 | 發電站及變電所用鎳-鎘蓄電池組的維護,試驗及更換用推薦規程 | (Recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications) |
| IEEE 1115 | 靜態用鎳-鎘電池組規格的推薦操作規程 | (Recommended practice for sizing nickel-cadmium batteries for stationary applications) |
| IEEE 1144 | 光電系統用校準鎳-鎘蓄電池組的推薦規程 | (Recommended practice for sizing nickel-cadmium batteries for photovolatic (PV) systems) |
| IEEE 1184 | 不間斷電源系統電池尺寸的規定和選擇 | (Selection and sizing of batteries for uninterruptible power systems) |
| IEEE 1187 | 固定設備用的閥調節鉛酸蓄電池的安裝設計和安裝的推薦性實施規程 | (Recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications) |
| IEEE 1188 | 發電站用閥調節鉛酸(VRLA)蓄電池組的保養、試驗和更新的推薦規程 | (Recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications) |
| IEEE 1189 | 固定設備用調節閥鉛酸(VRLA)蓄電池的選擇指南 | (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications) |
| IEEE 1375 | 固定蓄電池組的保護指南 | (Guide for the protection of stationary battery systems) |
| IEEE 1536 | 鐵路運輸車輛蓄電池物理接口 | (Rail transit vehicle battery physical interface) |
| IEEE 450 | 通氣固定鉛蓄電池組的維護、試驗及更換 | (Maintenance, testing, and replacement of vented lead-acid batteries for stationary applications) |
| IEEE 484 | 發電站用透氣式鉛酸蓄電池組設計、安裝推薦規程 | (Recommended practice for installation design and installation of vented lead-acid batteries for stationary applications) |
| IEEE 485 | 固定設施用酸性鉛蓄電池尺寸測定推薦規程 | (Recommended practice for sizing lead-acid batteries for stationary applications) |
| IEEE 535 | 核電站用1E級鉛蓄電池組的鑒定 | (Qualification of class 1E lead storage batteries for nuclear power generating stations) |
| IEEE 650 | 核電站1E級固定式電池充電器和逆變器的合格鑒定 | (Qualification of class 1E static battery chargers and inverters for nuclear power generating stations) |
| IEEE 937 | 光電系統用鉛酸蓄電池組的安裝及維護推薦規程 | (Recommended practice for installation and maintenance of lead-acid batteries for photovoltaic (PV) systems) |
| UL 1236 | 充電的發動機起動電池組用蓄電池充電器 | (Battery chargers for charging engine-starter batteries ) |
| UL 1564 | 工業蓄電池充電器 | (Industrial battery chargers ) |
| UL 1642 | 鋰蓄電池組 | (Lithium batteries ) |
| UL 1989 | 備用蓄電池組 | (Standby batteries ) |
| UL 2054 | 家用和商用蓄電池組 | (Household and commercial batteries ) |
| UL 2089 | 車輛用蓄電池適配器 | (Vehicle battery adapters ) |
| UL 218A | 柴油機中驅動離心點火泵用電池接頭標準 | (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps ) |
| UL 745-3 | 由蓄電池供電的便攜工具 | (Portable battery operated tools ) |
| UL 745-4-1 | 由蓄電池供電的電鉆的特殊要求 | (Particular requirements battery-operated drills ) |
| UL 745-4-11 | 由蓄電池供電的往復式鋸的特殊要求 | (Particular requirements for battery-operated reciprocating saws ) |
| UL 745-4-14 | 由蓄電池供電的刨刀的特殊要求 | (Particular requirements for battery-operated planers ) |
| UL 745-4-17 | 由蓄電池供電的刻紋機和修剪機特殊要求 | (Particular requirements for battery-operated routers and trimmers ) |
| UL 745-4-2 | 由蓄電池供電的旋具和套筒扳手特殊要求 | (Particular requirements for battery-operated screwdrivers and impact wrenches ) |
| UL 745-4-3 | 由蓄電池供電的研磨機、磨光器和盤形砂輪機特殊要求 | (Particular requirements for battery-operated grinders, polishers, and disk-type sanders ) |
| UL 745-4-35 | 由蓄電池供電的污水清潔器特殊要求 | (Particular requirements for battery-operated drain cleaners ) |
| UL 745-4-36 | 由蓄電池供電的手持式電動工具特殊要求 | (Particular requirements for battery-operated hand motor tools ) |
| UL 745-4-4 | 由蓄電池供電的砂輪機特殊要求 | (Particular requirements for battery-operated sanders ) |
| UL 745-4-5 | 由蓄電池供電的圓盤鋸和圓盤刀具特殊要求 | (Particular requirements for battery-operated circular saws and circular knives ) |
| UL 745-4-6 | 由蓄電池供電的錘子的特殊要求 | (Particular requirements for battery-operated hammers ) |
| UL 745-4-8 | 由蓄電池供電的剪刀和步?jīng)_輪廓機特殊要求 | (Particular requirements for battery-operated shears and nibblers ) |
| 編號 | 中文名稱 | 英文名稱 |