微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C78.1430 | 電燈.幻燈放映機燈.帶GX5.3基座的冷凝、二色性、1.65Inch(42mm)、帶整體反射鏡的邊緣標準鹵鎢燈 | Electric Lamps - Slide Projector Lamps - Condensing, Dichroic, 1.65-Inch (42mm), Integral Reflector Rim-Reference Tungsten-Halogen Lamps with GX5.3 Bases |
| ANSI C78.1431 | 電燈:幻燈放映機燈:帶GY5.3基座的冷凝、二色性、2英寸(51mm)、帶整體反光鏡的邊緣標準鹵鎢燈 | Electric Lamps: Slide Projector Lamps: Condensing, Dichroic, 2-Inch (51-mm), Integral Reflector, Rim-Reference Tungsten-Halogen Lamps with GY5.3 Bases |
| ANSI C78.1432 | 電燈.GZ9.5雙插頭、預聚焦燈座和36.5mm標定光源中心長度的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length |
| ANSI C78.1433 | 帶GX5.3基座的2英寸(51mm)整體反射邊緣標準鹵鎢大屏幕投射燈 | Two-Inch (51-mm) Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX 5.3 Bases |
| ANSI C78.1434 | 帶GX7.9基座的冷凝二色性涂層整體反光側釘?shù)柠u鎢投射燈 | Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI C78.1435 | 投射燈.帶G5.3基座的鹵鎢燈 | Projection Lamps - Tungsten-Halogen Lamps with G5.3 Bases |
| ANSI C78.1451 | 電燈.鎢鹵素?zé)舯Ｗo(hù)罩的使用.注意事項 | Electric Lamps - Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice |
| ANSI C78.1460 | GZ9.5基座,T6燈泡,36.5毫米LCL,76.2毫米MOL,有近反射器的單端鎢鹵素?zé)? | Single-Ended Tungsten-Halogen Lamps, GZ9.5 Base, T6 Bulb, 36.5 mm LCL, 76.2 mm MOL with Proximity Reflector |
| ANSI C78.1500 | 電燈.帶P28型基座和89mmLCL的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 89 mm LCL |
| ANSI C78.1501 | 電燈.帶G22型基座和63.5mmLCL的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with G22 Bases and 63.5 mm LCL |
| ANSI C78.1503 | 電燈.帶G9.5型基座和60.5mmLCL的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL |
| ANSI C78.1504 | 電燈.帶P28型基座和55.5mmLCL的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL |
| ANSI C78.1505 | 電燈.帶G38型基座和127mmLCL的鹵鎢燈 | Electric Lamps - Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL |
| ANSI C78.260 | 鎢鹵素管燈.物理性能 | Tubular Tungsten-Halogen Lamps, Physical Characteristics |
| ANSI C78.60432.1 | 電燈.白熾燈.安全規范.家用和類似一般照明用鹵鎢燈.第1部分 | For Electric Lamps- Incandescent Lamps- Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes- Part 1 |
| ANSI C78.60432.2 | 電燈.白熾燈.安全規范.家用和類似一般照明用鎢鹵燈.第2部分 | For Electric Lamps- Incandescent Lamps- Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes- Part 2 |
| ANSI C78.60432.3 | 電燈.白熾燈.安全規范.第3部分:鎢鹵燈 | Electric Lamps- Incandescent Lamps-Safety Specifications-Part 3 : Tungsten halogen lamps |
| ANSI PH2.29 | 攝影感光測定用發光體.日光燈和鎢絲白熾燈 | Illuminants for Photographic Sensitometry: Daylight and Incandescent Tungsten |
| ANSI/ASTM B574 | 低碳鎳鉬鉻,低碳鎳鉻鉬和低碳鎳鉻鉬鎢合金棒規范 | Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
| ANSI/ASTM B663 | 銀鎢硬質合金電觸點材料規范 | Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ANSI/ASTM B719 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒材規范 | Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ANSI/ASTM B722 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)無縫管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ANSI/ASTM B726 | 鎳鉻鉬鈷鎢鐵硅合金 (UNS N06333)焊管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B814 | 鎳鉻鐵鉬鎢合金板材、薄板材和帶材規范 | Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ANSI/ASTM B815 | 鈷鉻鎳鉬鎢合金桿規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B818 | 鈷鉻鎳鉬鎢合金(UNS R31233)板,薄板和帶材規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ANSI/AWS A5.12/A 5.12M | 電弧焊接和切割用鎢及鎢合金焊條 | Tungsten and Tungsten Alloy Electrodes for Arc Welding and Cutting |
| ANSI/AWS A5.22 | 助溶劑芯弧焊用不銹鋼焊條和鎢電極惰性氣體保護焊用不銹鋼助溶劑芯焊條規范 | Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding |
| ANSI/AWS B2.1-1-007 | 在焊接條件下、有或沒有墊板、10到18規格的鍍鋅鋼的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-008 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼(M1,組1)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-021 | 在焊接或PWHT條件下1/8到1-1/2英尺厚ER70S-2和E7018碳鋼的保護金屬電弧焊和鎢電極惰性氣體保護電弧焊的標準 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-207 | 主要用于管道的、在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2碳鋼的鎢極電弧焊的標 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-209 | 主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2及E7018碳鋼的藥皮焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-210 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-211 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-010 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-229 | 碳鋼與奧氏體不銹鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2英寸厚ER30 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-230 | 氣體保護鎢極弧焊的標準焊接程序規范(WPS),可熔嵌入根部的,碳鋼與奧氏體不銹鋼(M-1/P-1/S-1, 組 1 和 2 焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-231 | 帶可熔嵌入焊條的碳鋼與奧氏體不銹鋼氣體保護鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1) | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-217 | 鉻鉬鋼氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組)ER 80S-B2.在焊接條件下1/8到1/2英寸厚或在PW | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-4-219 | 氣體保護鎢極弧焊以及鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在焊接條件下1/8到12 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application |
| ANSI/AWS B2.1-4-220 | 標準焊接程序規范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-4/P-4/S-4, | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-4-221 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-222 | 鉻鉬鋼氣體保護鎢極弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 90S-BS,1/8到1/2英寸厚或在PWHT條件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-224 | 氣體保護鎢極弧焊以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下1/8到1/2英寸厚或在P | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-225 | 標準焊接程序規范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-5A或P-5A)1/ | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application |
| ANSI/AWS B2.1-5A-226 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-8-009 | 在焊接條件下、有或沒有墊板、10到18規格的不銹鋼(M-8或P-8)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-024 | 在焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保護焊的焊接程序規范(WP | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-025 | 在焊接條件下、保護金屬電弧焊之后的1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-212 | 主要用于管道的、在ERXX焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-214 | 標準焊接程序規范(WPS).主要用于管道的,在焊接條件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奧氏體不銹鋼(M-8/P | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-215 | 在 IN3XX和ER3XX焊接條件下、1/8到1-1/2英寸厚的自耗嵌入式奧氏體不銹鋼(M-8/P-8/S-8,組1)鎢電極惰性氣體保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition |
| ANSI/AWS B2.1-8-216 | 標準焊接程序規范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奧氏體不銹鋼(M-8/P-8/S-8,組1)的 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition |
| ANSI/AWS B2.1.009 | 10至18號有或無背襯焊態條件下不銹鋼(M-8或P-8)鎢極氣弧焊接 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1.015 | 在焊接條件下、有或沒有墊板、10到18規格（M-22/P-22)鋁的氣體保護鎢極弧焊的標準焊接程序規范(WPS) | Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1.22-015 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格鋁(M-22或P-22)的鎢電極惰性氣體保護焊 | Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS C5.5/C 5.5M | 鎢電極惰性氣體保護焊的推薦規范 | Recommended Practices for Gas-Tungsten-Arc Welding |
| ANSI/AWS D10.6 | 鈦管和管道鎢電極氣體保護焊推薦規程 | Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for |
| ANSI/IEC C78.682 | 電燈.測定鹵鎢石英燈收縮溫度的標準方法 | Electric Lamps - Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps |
| ASTM A 1017/A 1017M | 鉻鉬鎢合金鋼制壓力容器板材的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
| ASTM A 1041/A 1041M | 較高強度鉻-鉬-鎢合金鋼壓力容器板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
| ASTM A 144 | 鎢鐵合金規范 | Specification for Ferrotungsten |
| ASTM B 390 | 鎢硬質合金表觀晶粒尺寸及其分布的評定 | Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides |
| ASTM B 446 | 鎳鉻鉬鈮合金(UNS N06625)、鎳鉻鉬硅合金(UNS N06219)和鎳鉻鉬鎢合金(UNS N06650)桿材和棒材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
| ASTM B 482 | 電鍍用鎢和鎢合金的制備 | Preparation of Tungsten and Tungsten Alloys for Electroplating |
| ASTM B 631 | 銀鎢電接觸材料標準規范 | Standard Specification for Silver-Tungsten Electrical Contact Materials |
| ASTM B 663 | 銀鎢硬質合金電觸點材料標準規范 | Standard Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ASTM B 702 | 銅鎢電觸點材料標準規范 | Standard Specification for Copper-Tungsten Electrical Contact Material |
| ASTM B 718 | 鎳鉻鉬鈷鎢鐵硅合金板,薄板和帶材的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B 719 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B 722 | 鎳鉻鉬鈷鎢鐵硅合金無縫管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ASTM B 723 | 鎳鉻鉬鈷鎢鐵硅合金焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM B 726 | 鎳鉻鉬鈷鎢鐵硅合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B 755 | 鎳鉻鉬鎢合金板、薄板和帶材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip |
| ASTM B 756 | 鎳鉻鉬鎢合金(UNS N06110)棒材和桿材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
| ASTM B 757 | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B 758 | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B 759 | 鎳鉻鉬鎢合金管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
| ASTM B 760 | 鎢板,薄板和箔 | Tungsten Plate, Sheet and Foil |
| ASTM B 777 | 鎢基高密度金屬標準規范 | Standard Specification for Tungsten Base, High-Density Metal |
| ASTM B 814 | 鎳鉻鐵鉬鎢合金(UNS N06920)厚板、薄板和帶材的標準規范 | Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ASTM B 815 | 鈷鉻鎳鉬鎢合金桿標準規范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B 818 | 鈷鉻鎳鉬鎢合金板、薄板和帶材標準規范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ASTM B 890 | X射線熒光光譜法測定鎢合金和碳化鎢金屬成分的標準試驗方法 | Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry |
| ASTM B 930 | 確定燒結碳化鎢(硬質合金)中不規則大顆粒的頻度和粒徑額定值的標準試驗方法 | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| ASTM E 159 | 鈷、銅、鎢和鐵粉末的氫損耗的標準試驗方法 | Standard Test Method for Hydrogen Loss of Cobalt, Copper, Tungsten, and Iron Powders |
| ASTM E 696 | 鎢--錸合金熱電偶絲的標準規范 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
| ASTM E 988 | 鎢錸絲熱電偶的溫度電動勢(EMF)圖表 | Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples |
| ASTM F 1894 | 定量分析硅化鎢半導體加工膜組分和厚度的標準試驗方法 | Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness |
| ASTM F 204 | 密封鎢絲和鎢條表面裂紋的試驗方法 | Test Method for Surface Flaws in Tungsten Seal Rod and Wire |
| ASTM F 269 | 鎢絲彎曲度的試驗方法 | Test Method for Sag of Tungsten Wire |
| ASTM F 288 | 電子器件和電燈用鎢絲標準規范 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| ASTM F 73 | 電子器件及燈泡用鎢錸合金絲 | Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps |
| ASTM F 90 | 外科植入設備用鍛制鈷鉻鎢鎳合金 | Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| BS 2593 | 旋轉鉆桿與碳化鎢硬質合金旋轉鉆頭規范 | Specification for rotary drill rods and tungsten carbide tipped rotary drill bits |
| BS 2HC 207 | 鎳-鈷-鎢-鉻-鋁-鉭-鉿-鈦合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉭25、鉿1.5、鈦1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5) |
| BS 2HC 208 | 鎳-鈷-鎢-鉻-鋁-鉬-鈦-鉭合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉬2.5、鈦1.5、鉭1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalu m alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 210 | 鎳-鎢-鋁-鉻-鉬合金鑄件規范(鎳基鎢10.5、鋁6.0、鉻6.0、鉬2.0) | Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0) |
| BS 2S 111 | 飛機材料規范.鎳鉻鎢閥門鋼 | Specification for aircraft material - Nickel-chromium-tungsten valve steel |
| BS 3727-14 | 電子管和電子閥用鎳的分析方法.第14部分:鎢含量測定(重量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method) |
| BS 4872-2 | 不要求批準焊接工藝時焊工的鑒定考試規范.第2部分:鋁及鋁合金鎢極惰性氣體保護電弧焊或熔化極惰性氣體保護 | Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys |
| BS 5518 | 鎢絲燈照明用電子可調控制開關(調光器開關)規范 | Specification for electronic variable control switches (dimmer switches) for tungsten filament lighting |
| BS 6179 | 通用鎢絲燈(壽命2000小時)規范 | Specification for tungsten filament lamps for general service (with lives of 2000 h) |
| BS 6200-3.31.2 | 鐵、鋼和其他黑色金屬抽樣和分析.第3部分:分析方法.第31節:錫含量測定.第2分節:鎢鐵和鎢金屬:體積法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tin - Ferrotungsten and tungsten metal: volumetric method |
| BS 6200-3.33.1 | 鐵、鋼和其他黑色金屬抽樣和分析.第3部分:分析方法.第33節:鎢含量測定.第1小節:鋼:稱重法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Steel: gravimetric method |
| BS 6200-3.33.2 | 鐵、鋼和其他黑色金屬抽樣和分析.第3部分:分析方法.第33節:鎢含量測定.第2分節:鋼:分光光度法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Steel: spectrophotometric method |
| BS 6200-3.33.3 | 鐵、鋼和其他黑色金屬抽樣與分析.第3部分:分析方法.第33節:鎢含量測定.第3小節:鐵鎢合金:稱重法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Ferrotungsten: gravimetric method |
| BS 7252-5 | 外科植入物用金屬材料.第5部分:可鍛鈷-鉻-鎢-鎳合金規范 | Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy |
| BS 7252-8 | 外科植入物用金屬材料.可鍛鈷-鎳-鉻-鉬-鎢-鐵合金規范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| BS EN 1668 | 焊接用料.非合金和細晶粒鋼和鎢極惰性氣體保護用的焊條,焊絲和沉積物.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| BS EN 60064 | 家用和類似普通照明用鎢絲燈泡.性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| BS EN 60357 | 鹵鎢燈(非車輛用).性能規范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| BS EN 60432-1 | 白熾燈安全性規范.家用和類似普通照明用的鎢絲燈 | Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| BS EN 60432-2 | 白熾燈安全性規范.家用和類似普通照明用的鹵鎢燈 | Incandescent lamps - Safety specifications - Tungsten halogen lamps for domestic and similar general lighting purposes |
| BS EN 60432-3 | 白熾燈安全規范.鹵鎢燈(非車用) | Incandescent lamps - Safety specifications - Tungsten-halogen lamps (non-vehicle) |
| BS EN 60682 | 石英鹵鎢燈燈夾溫度測量方法 | Method for measuring the pinch temperature of quartz-tungsten-halogen lamps |
| BS EN 61047 | 鎢絲燈用交直流供電電子降壓轉換器.性能要求 | D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements |
| BS EN 61558-2-9 | 電力變壓器、供電設備及類似設備的安全.Ⅲ類手抽式鎢絲燈的變壓器的特殊要求 | Safety of power transformers, power supply units and similar products - Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| BS EN ISO 10650-1 | 牙科學.動力聚合活化劑.石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Quartz tungsten halogen lamps |
| BS EN ISO 6848 | 電弧焊和切割.非自耗鎢電極.分類 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification |
| BS EN ISO 9692-3 | 焊接和相關工藝.接頭的準備.鋁及其合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 | Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS HC 103 | 23%鉻-鎳-鎢耐腐蝕鋼鑄件(鉻23、鎳11、鎢3)規范 | Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3) |
| BS HC 202 | 沉淀硬化鎳基鉻-鈮-鉬-鐵-鎢合金鑄件規范(鉻20.0、鈮6.6、鉬6.0、鐵3.0、鎢2.5) | Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
| BS HC 301 | 鈷基鉻-鎳-鎢合金鑄件規范(鉻25.5、鎳10.5、鎢7.5) | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HR 204 | 鎳-鉻-鐵-鉬-鈷-鎢耐熱合金板材,薄板材和帶材(鎳基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)規范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 240 | 鈷-鉻-鎢-鎳-錳耐熱合金板材、薄板材和帶材(鈷基、Cr20、W15、Ni10、Mn1.5)規范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15 , Ni 10, Mn 1.5) |
| BS HR 40 | 鈷-鉻-鎢-鎳-錳耐合金坯錠、棒材、鍛件和零件(鎳基、Cr20、W15、Ni10、Mn1.5)規范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 6 | 鎳-鉻-鐵-鉬-鈷-鎢耐合金坯錠、棒材、鍛件和零件(鎳基、Cr21.7、Fe18.5、Mo9、Co1.5、W0.6)規范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS ISO 7589 | 攝影.感光測定用光源.日光、白熾鎢絲和洗印機規范 | Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| DIN 17562 | 鎢鐵.交貨技術條件 | Ferrotungsten - Technical delivery conditions |
| DIN 6830-1 | 增光屏用X射線膠片；鎢酸鈣增光屏熒光射線感光模擬 | Medical X-ray films used with intensifying screens; sensitometric simulation of the fluorescent radiation of calcium tungstate intensifying screens |
| DIN EN 1668 | 焊接助劑.合金鋼和細晶粒鋼的鎢保護氣體焊接用鋼棒、鋼絲和熔焊金屬.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification; German version EN 1668:1997 |
| DIN EN 60357 | 鹵鎢燈(非車燈).性能規范 | Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified); German version EN 60357:2003 + Corrigendum July 2003 |
| DIN EN 60432-1 | 白熾燈.安全規范.第1部分:家用和類似場合普通照明用鎢絲燈 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999, modified + A1:2005); German version EN 60432-1:2000 + A1:2005 |
| DIN EN 60432-2 | 白熾燈.安全性規范.第2部分:家用和類似場合普通照明用鹵鎢燈 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999, modified + A1:2005, modified); German version EN 60432-2:2000 + A1:2005 |
| DIN EN 60432-3 | 白熾燈.安全規范.第3部分:鎢鹵燈(非車用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002 + A1:2005); German version EN 60432-3:2003 + A1:2005 |
| DIN EN 60682 | 測量石英鹵鎢燈夾封部溫度的標準方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993 |
| DIN EN 61047 | 鎢絲燈用直流或交流供電電子降壓轉換器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements (IEC 61047:2004); German version EN 61047:2004 |
| DIN EN 61558-2-9 | 電力變壓器、供電設備及類似設備安全性.第2-9部分:Ⅲ類手提鎢絲燈變壓器特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002); German version EN 61558-2-9:2003 |
| DIN EN ISO 10650-1 | 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005 |
| DIN EN ISO 6848 | 電弧焊接和切割.非自耗鎢電極.分類 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2004); German version EN ISO 6848:2004 |
| DIN EN ISO 9692-3 | 焊接和相關工藝.焊縫準備推薦標準.第3部分:鋁和鋁合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001 |
| DIN ISO 13276 | 煙草和煙草制品.煙堿純度的測定.使用鎢硅酸的重量分析法 | Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid (ISO 13276:1997) |
| DIN ISO 5832-5 | 外科植入物.金屬材料.第5部分:.精制鈷-鉻-鎢-鎳合金 (ISO 5832-5:1993) | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993) |
| DIN ISO 5832-8 | 外科植入物.金屬材料.第8部分:鍛制鈷鎳鉻鉬鎢鐵合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997) |
| EN 1668 | 焊接耗材 非合金和細晶粒鋼的惰性氣體保護鎢極焊用焊條 焊絲和熔敷 分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| EN 26848 | 惰性氣體保護電弧焊接以及等離子氣體切割和焊接用的鎢極 編碼 | Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984) |
| EN 60064-1995+A2 | 家庭及類似場合普通照明用鎢絲燈 性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements (IEC 60064:1993, modified) |
| EN 60064/prA1 | 家庭及類似場合普通照明用鎢絲燈 性能要求 修改prA1 | Amendment 1 to IEC 60064: Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| EN 60357 | 鹵鎢燈（非機動車輛用） | Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified)) / Note: Endorsement notice |
| EN 60432-1 | 白熾燈 安全規范 第1部分：家庭及類似場合普通照明用鎢絲燈 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999, modified) |
| EN 60432-2 | 白熾燈 安全規范 第2部分：家庭及類似場合普通照明用鹵鎢燈 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999, modified) |
| EN 60432-3 | 白熾燈 安全規范 第3部分：鹵鎢燈（非機動車輛用） | Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) (IEC 60432-3:2002) / Note: Endorsement notice |
| EN 60598-2-6-1994+A1 | 燈具 第2分：特殊要求 第6：內裝變壓器的鎢絲燈燈具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps (IEC 60598-2-6:1994) |
| EN 60682-1993+A2 | 石英鹵鎢燈夾封部位溫度標準測量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987) |
| EN 60809-1996+A1-1996+A2 | 道路車輛用鎢絲燈 尺寸 電和照明要求 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:1995) / Note: To be amended by EN 60809/prA3 (2003-07). |
| EN 61047-1992+A1-1996+A22001 | 鎢絲燈用交直流供電電子降壓轉換器 性能要求 | D.C. or a.c. supplied electronic step-down convertors for filament lamps; performance requirements (IEC 61047:1991) |
| EN 61558-2-9 | 電力變壓器、供電裝置和類似產品的安全 第2-9部分：手持式三級鎢絲燈變壓器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002) / Note: Endorsement notice |
| EN ISO 9692-3 | 焊接和相關工藝 接頭制備的建議 第3部分：鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| GB 14196.1 | 家庭和類似場合普通照明用鎢絲燈安全要求 | Tungsten filament lamps for domestic and similar general lighting purposes--Safety specification |
| GB 14196.2 | 家庭和類似場合普通照明用鹵鎢燈安全要求 | Tungsten halogen lamps for domestic and similar general lighting purposes--Safety specification |
| GB 16229 | 車間空氣中鎢衛生標準 | Health standard for tungsten in the air of workplace |
| GB 19212.10 | 電力變壓器、電源裝置和類似產品的安全 第10部分：III類手提鎢絲燈用變壓器的特殊要求 | () |
| GB 19510.3 | 燈的控制裝置第3部分:鎢絲燈用直流/交流電子降壓轉換器的特殊要求 | Lamp controlgear--Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps |
| GB 7000.18 | 鎢絲燈用特低電壓照明系統安全要求 | Safety requirements for extra low voltage lighting systems for filament lamps |
| GB 7000.6 | 內裝變壓器的鎢絲燈燈具的安全要求 | Safety requirements of luminaires with built-in trans-formers for filaments lamps |
| GB/T 10116 | 仲鎢酸銨 | Ammonium paratungstate |
| GB/T 10417 | 碳化鎢鋼結硬質合金技術條件 | Technical conditions of steel-bonded tungsten carbides |
| GB/T 10418 | 碳化鎢鋼結硬質合金橫向斷裂強度的測定 | Steel bonded tungsten carbides--Determination of transverse rupture strength |
| GB/T 10419 | 碳化鎢鋼結硬質合金沖擊韌度的測定 | Steel bonded tungsten carbides--Determination of impact toughness |
| GB/T 10420 | 碳化鎢鋼結硬質合金洛氏硬度(C和A)的測定 | Steel bonded tungsten carbides--Determination of rockwell hardness(scales C and A) |
| GB/T 10681 | 家庭和類似場合普通照明用鎢絲燈性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes--Performance requirements |
| GB/T 11845 | 二氧化鈾粉末和芯塊中鎢的測定分光光度法 | Uranium dioxide powder and pellets--Determination of tungsten--Spectrophotometric method |
| GB/T 12690.13 | 稀土金屬及其氧化物中非稀土雜質化學分析方法鉬、鎢量的測定電感耦合等離子體發射光譜法和電感耦合等離子體 | Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum |
| GB/T 13747.10 | 鋯及鋯合金化學分析方法硫氰酸鹽分光光度法測定鎢量 | Zirconium and zirconium alloys--Determination of tungsten content--Thiocyanate spectrophotometric method |
| GB/T 14094 | 鹵鎢燈(非機動車輛用)性能要求 | Tungsten halogen lamps(non-vehicle)Performance requirements |
| GB/T 14352.1 | 鎢礦石、鉬礦石化學分析方法硫氰酸鹽光度法測定鎢量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of tungsten content--Potassium thiocynate photometric method |
| GB/T 14352.10 | 鎢礦石、鉬礦石化學分析方法二乙基二硫代氨基甲酸銀光度法測定砷量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of arsenic content--Silver diethyl-dithiocarbamate photometric method |
| GB/T 14352.11 | 鎢礦石、鉬礦石化學分析方法火焰原子吸收分光光度法測定鉍量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of bismuth content--Flame atomic absorption spectrometric method |
| GB/T 14352.12 | 鎢礦石、鉬礦石化學分析方法甲基異丁基甲酮萃取火焰原子吸收分光光度法測定銀量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of silver content--Flame atomic absorption spectrometric method after methyl-iso-butyl ketone extraction |
| GB/T 14352.13 | 鎢礦石、鉬礦石化學分析方法鹽酸-氯化銨底液極譜法測定錫量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of tin content--Polarographic method in hydrochloric acid-ammoninm chloride medium |
| GB/T 14352.14 | 鎢礦石、鉬礦石化學分析方法乙酸丁酯萃取分離-羅丹明B光度法測定鎵量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of gallium content--Rhodamine B photometric method after butylacetate extraction |
| GB/T 14352.15 | 鎢礦石、鉬礦石化學分析方法蒸餾分離-苯芴酮-十六烷基三甲基溴化銨光度法測定鍺量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of germanium content--Distillation separation-phenyl fluorone cetyltrimethyl-ammonium bromide photometric method |
| GB/T 14352.16 | 鎢礦石、鉬礦石化學分析方法3，3’-二氨基聯苯胺光度法測定硒量 | Methodsfor chemical analysis of tungsten ores and molybdenum ores--Determination of selenium content--3，3’-Diaminobenzidine photometric method |
| GB/T 14352.17 | 鎢礦石、鉬礦石化學分析方法丁基羅丹明B光度法測定碲量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of tellurium content--Butyl-Rhodamine B photometric method |
| GB/T 14352.18 | 鎢礦石、鉬礦石化學分析方法硫氰酸鹽光度法測定錸量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of rhenium content--Potassium thiocynate photometric method |
| GB/T 14352.2 | 鎢礦石、鉬礦石化學分析方法硫氰酸鹽光度法測定鉬量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of molybdenumcontent--Potassium thiocynate photometric method |
| GB/T 14352.3 | 鎢礦石、鉬礦石化學分析方法火焰原子吸收分光光度法測定銅量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of coppercontent--Flame atomic absorption spectrometric method |
| GB/T 14352.4 | 鎢礦石、鉬礦石化學分析方法火焰原子吸收分光光度法測定鉛量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of lead content--Flame atomic absorption spectrometric method |
| GB/T 14352.5 | 鎢礦石、鉬礦石化學分析方法火焰原子吸收分光光度法測定鋅量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of zinc content--Flame atomic absorption spectrometric method |
| GB/T 14352.6 | 鎢礦石、鉬礦石化學分析方法火焰原子吸收分光光度法測定鎘量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of cadmium content--Flame atomic absorption spectrometric method |
| GB/T 14352.7 | 鎢礦石、鉬礦石化學分析方法丁二肟-磺基水楊酸-氫氧化銨-氯化銨底液極譜法測定鈷量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of cobalt content--Polarographic method in dimethylglyoxime-sulfosalicylic acid-ammonium hydroxide-ammonium chloride system |
| GB/T 14352.8 | 鎢礦石、鉬礦石化學分析方法丁二肟-磺基水楊酸-氫氧化銨-氯化銨底液極譜法測定鎳量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of nickel content--Polarographic method in dimethylglyoxime-sulfosalicylic acid-ammonium hydroxide-ammonium chloride system |
| GB/T 14352.9 | 鎢礦石、鉬礦石化學分析方法高溫燃燒碘量法測定全硫量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of totol sulfurcontent--Iodometric method after combustion |
| GB/T 14353.10 | 銅礦石、鉛礦石和鋅礦石化學分析方法硫酸-苯羥乙酸-辛可寧-氯酸鉀底液催化極譜法測定鎢量 | Methods for chemical analysis of copper ores，lead ores and zinc ores--Determination of tungsten content--Catalytic polarographic method in sulfuric acid-phenylhydroxy acetic acid-cinchonine potassium chlorate system |
| GB/T 14501.3 | 六氟化鈾中鎢、鉬、鈮、鈦、鋯的測定化學光譜法 | Spectrochemical determination of tungsten，molybdenum，niobium，titanium and zirconium in uranium hexafluoride |
| GB/T 14506.25 | 硅酸鹽巖石化學分析方法硫酸-苯羥乙酸-辛可寧-氯酸鉀底液極譜法連續測定鉬量和鎢量 | Silicate rocks--Determination of molybdenum and tungsten content--Sulfuric acid-phenylhydroxyacetic acid-cinchonine-potassium chlorate medium polarographic method |
| GB/T 15061 | 銀鹽感光材料感光測定通則第1 部分:適用于白熾鎢光和模擬日光曝光的試樣曝光條件 | General specifications for sensitometry of silver halide photographic materials--Part 1:Sensitometric exposure conditions of films to be exposured for incandescent tungsten and daylight |
| GB/T 15072.17 | 貴金屬及其合金化學分析方法鉑合金中鎢量的測定 | Platinum alloys--Determination of tungsten content |
| GB/T 15076.5 | 鉭鈮化學分析方法鉬量和鎢量的測定 | Methods for chemical analysis of tantalum and niob-ium--Determination of molybdenum and tungsten contents |
| GB/T 16104 | 車間空氣中鎢或碳化鎢的硫氰酸鉀-三氯化鈦分光光度測定方法 | Workplace air--Determination of tungsten or tungsten carbide--Potassium thiocyanate-titanous trichloride spectrophotometric method |
| GB/T 1819.9 | 錫精礦化學分析方法三氧化鎢量的測定硫氰酸鹽分光光度法 | Methods for chemical analysis of tin concentrates--Determination of tungsten trioxide content--The thiocyanate spectrophotometric method |
| GB/T 19654 | 燈用附件鎢絲燈用直流/交流電子降壓轉換器性能要求 | Auxiliaries for lamps--D.C.or A.C.supplied electronic step-down convertors for filament lamps Performance requirements |
| GB/T 20152 | 石英鹵鎢燈壓封部位溫度的標準測量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
| GB/T 21095 | 飛機用鎢絲燈 | () |
| GB/T 223.43 | 鋼鐵及合金化學分析方法鎢量的測定 | Methods for chemical analysis of iron，steel and alloy--Determination of tungsten content |
| GB/T 223.66 | 鋼鐵及合金化學分析方法硫氰酸鹽-鹽酸氯丙嗪-三氯甲烷萃取光度法測定鎢量 | Methods for chemical analysis of iron，steel and alloy--The thiocyanate chlorpromazine hydrochloride--chloro form extraction photometric method for the determination of tungsten content |
| GB/T 2967 | 鑄造碳化鎢 | Cast tungsten carbide |
| GB/T 3457 | 氧化鎢 | Tungstic oxide |
| GB/T 3458 | 鎢粉 | Tungsten Powder |
| GB/T 3459 | 鎢條 | Tungsten bars and rods |
| GB/T 3648 | 鎢鐵 | Ferrotungsten |
| GB/T 3654.9 | 鈮鐵化學分析方法硫氰酸鹽光度法測定鎢量 | Methods for chemical analysisof ferroniobium--The thiocyanate photometric method for the determination of tungsten content |
| GB/T 3875 | 鎢板 | Tungsten sheet |
| GB/T 4181 | 鎢絲 | Tungsten wires |
| GB/T 4183 | 鉬鎢合金絲 | Molybdenum-tungsten alloy wire |
| GB/T 4184 | 鎢錸合金絲 | Tungsten-rhenium alloy wires |
| GB/T 4185 | 鉬鎢合金條 | Molybdenum-tungsten alloy bars |
| GB/T 4186 | 鉬鎢合金桿 | Molybdenum-tungsten alloy rods |
| GB/T 4187 | 鎢桿 | Tungsten rods |
| GB/T 4189 | 摻雜鎢條 | Doped tungsten bars |
| GB/T 4192 | 電真空器件及電光源用鎢、鉬材料電阻率的測試方法 | Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and vacuumtubes |
| GB/T 4193 | 電真空器件及電光源用細鎢絲、鉬絲和薄帶密度的測試方法 | Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes |
| GB/T 4194 | 鎢絲蠕變試驗、高溫處理及金相檢查方法 | Creep testing，high temperature treatment and metallographic examination of the tungsten wires |
| GB/T 4195 | 鎢、鉬粉末粒度分布測試方法(沉降天平法) | Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles |
| GB/T 4196 | 鎢、鉬條密度測定方法 | Method for testing the density of tungsten and molybdenum bars |
| GB/T 4197 | 鎢鉬及其合金的燒結坯條、棒材晶粒度測試方法 | Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys |
| GB/T 4295 | 碳化鎢粉 | Tungsten carbide powder |
| GB/T 4324.1 | 鎢化學分析方法方波極譜法連續測定鉛、鎘量 | Methods for chemical analysis of tungsten--The square wave polarographic method for the successive determination of lead and cadmium contents |
| GB/T 4324.10 | 鎢化學分析方法新酮試劑光度法測定銅量 | Methods for chemical analysis of tungsten--The neocuproine photometric method for the determination of copper content |
| GB/T 4324.11 | 鎢化學分析方法鉻天青S光度法測定鋁量 | Methods for chemical analysis oftungsten--The chromazurol S photometric method for the determination of aluminium content |
| GB/T 4324.12 | 鎢化學分析方法氯化-鉬藍光度法測定硅量 | Methods for chemical analysisof tungsten--The chlorization-molybdenum blue photometric method for the determination of silicon content |
| GB/T 4324.13 | 鎢化學分析方法乙二醛雙 (2-羥基苯胺) 光度法測定鈣量 | Methods for chemical analysis of tungsten--The glyoxal bis (2-hydroxyanil) photometric method for the determination of calcium content |
| GB/T 4324.14 | 鎢化學分析方法原子吸收分光光度法測定鈣量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of calcium content |
| GB/T 4324.15 | 鎢化學分析方法偶氮氯膦Ⅰ光度法測定鎂量 | Methods for chemical analysisof tungsten--The chlorophosphonazo Ⅰ photometric method for the determination of magnesium content |
| GB/T 4324.16 | 鎢化學分析方法原子吸收分光光度法測定鎂量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of magnesium content |
| GB/T 4324.17 | 鎢化學分析方法原子吸收分光光度法測定鈉量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content |
| GB/T 4324.18 | 鎢化學分析方法原子吸收分光光度法測定鉀量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content |
| GB/T 4324.19 | 鎢化學分析方法二安替比林甲烷光度法測定鈦量 | Methods for chemical analysis of tungsten--The diantipyrylmethane photometric method for the determination of titanium content |
| GB/T 4324.2 | 鎢化學分析方法碘化鉀-馬錢子堿光度法測定鉍量 | Methods for chemical analysis of tungsten--The potassium iodide-brucine photometric method for thedetermination of bismuth content |
| GB/T 4324.20 | 鎢化學分析方法鉭試劑光度法測定釩量 | Methods for chemical analysis of tungsten--The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content |
| GB/T 4324.21 | 鎢化學分析方法二苯基碳酰二肼光度法測定鉻量 | Methods for chemical analysis of tungsten--The diphenylcarbazide photometric method for the determination of chromium content |
| GB/T 4324.22 | 鎢化學分析方法甲醛肟分光光度法測定錳量 | Methods for chemical analysisof tungsten--The formaldoxime photometric method for manganese content |
| GB/T 4324.23 | 鎢化學分析方法燃燒-電導法測定硫量 | Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of suphur content |
| GB/T 4324.24 | 鎢化學分析方法鈹為載帶沉淀劑-鉬藍光度法測定磷量 | Methods for chemical analysis of tungsten--The berylium as carrier precipitation agent-molybdenum blue photometric method for the determination of phosphorus content |
| GB/T 4324.25 | 鎢化學分析方法惰氣熔融庫侖滴定法測定氧量 | Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content |
| GB/T 4324.26 | 鎢化學分析方法奈氏試劑光度法測定氮量 | Methods for chemical analysis of tungsten--The Nessler reagent photometric method for the determination of nitrogen content |
| GB/T 4324.27 | 鎢化學分析方法燃燒-庫侖滴定法測定碳量 | Methods for chemical analysisof tungsten--The combustion-coulometric titration method for the determinationof carbon content |
| GB/T 4324.28 | 鎢化學分析方法硫氰酸鹽光度法測定鉬量 | Methods for chemical analysis of tungsten--The thiocy anate photometric method for the determin-ation of molybdenum content |
| GB/T 4324.29 | 鎢化學分析方法重量法測定氯化揮發后殘?jiān)? | Methods for chemical analysis of tungsten--The gravimetric method for the determination of residue content after chloride volatility |
| GB/T 4324.3 | 鎢化學分析方法聚乙二醇辛基苯基醚-苯熒光酮光度法測定錫量 | Methods forchemical analysis of tungsten--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content |
| GB/T 4324.30 | 鎢化學分析方法重量法測定灼燒損失量 | Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition |
| GB/T 4324.4 | 鎢化學分析方法孔雀綠光度法測定銻量 | Methods for chemical analysis of tungsten--The malachite green photometric method for the determination of antimony content |
| GB/T 4324.5 | 鎢化學分析方法鉬藍光度法測定砷量 | Methods for chemical analysis of tungsten--The molybdenum blue photometric method for the determination of arsenic content |
| GB/T 4324.6 | 鎢化學分析方法鄰二氮雜菲光度法測定鐵量 | Methods for chemical analysisof tungsten--The ortho-phenanthroline photometric method for the determination iron content |
| GB/T 4324.7 | 鎢化學分析方法鈷試劑光度法測定鈷量 | Methods for chemical analysis of tungsten--The 5-Cl-PADAB photometric method for the determination of cobalt content |
| GB/T 4324.8 | 鎢化學分析方法丁二酮肟光度法測定鎳量 | Methods for chemical analysis of tungsten--The dimethylglyoxime photometric method for the determination of nickel content |
| GB/T 4324.9 | 鎢化學分析方法丁二酮肟重量法測定鎳量 | Methods for chemical analysis of tungsten--The dimethylglyoxime gravimetric method for the determination of nickel content |
| GB/T 4325.28 | 鉬化學分析方法四苯砷氯鹽酸鹽-硫氰酸鹽光度法測定鎢量 | Methods for chemical analysis of molybdenum--The tetraphenyl arsonium chloride hydrochloride-thiocyanate photometric method for the determination of tungsten content |
| GB/T 4414 | 包裝鎢精礦取樣、制樣方法 | Methods of sampling and sample preparation oftungsten concentrates in bags |
| GB/T 6150.1 | 鎢精礦化學分析方法鎢酸銨灼燒法測定三氧化鎢量 | Methods for chemical analysis of tungsten concentrates--The ammonium tungstate igniting gravimetric method for the determination of tungsten trioxide content |
| GB/T 6150.10 | 鎢精礦化學分析方法硫氰酸鹽光度法測定鉬量 | Methods for chemical analysis of tungsten concentrates--The thiocyanate photometric method for the determination of molybdenum content |
| GB/T 6150.11 | 鎢精礦化學分析方法原子吸收分光光度法測定銅量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of copper content |
| GB/T 6150.12 | 鎢精礦化學分析方法 鹽酸-氯化鈉底液極譜法測定鉛量 | Methods for chemical analysis of tungsten concentrates--The hydrochloric acid-sodium chloride supporting electrolyte polarographic method for the determination of lead content |
| GB/T 6150.13 | 鎢精礦化學分析方法 氫氧化銨-氯化銨底液極譜法測定鋅量 | Methods for chemical analysis of tungsten concentrates--The ammonium hydroxide-ammonium chloride supporting electrolyte polarographic method for the determination of zinc content |
| GB/T 6150.14 | 鎢精礦化學分析方法鉬藍光度法測定二氧化硅量 | Methods for chemical analysis of tungsten concentrates--The molybdenum blue photometric method for the determination of silicon dioxide content |
| GB/T 6150.15 | 鎢精礦化學分析方法 DDTC-Ag光度法測定砷量 | Methods for chemical analysis of tungsten concentrates--The silver diethyldithiocarbamate photometric method for the determination of arsenic content |
| GB/T 6150.16 | 鎢精礦化學分析方法原子吸收分光光度法測定錳量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of manganese content |
| GB/T 6150.17 | 鎢精礦化學分析方法半二甲酚橙光度法測定鉍量 | Methods for chemical analysis of tungsten concentrates--The semi-xylenol orange photometric method for the determination of bismuth content |
| GB/T 6150.18 | 鎢精礦化學分析方法磺基水楊酸光度法測定鐵量 | Methods for chemical analysis of tungsten concentrates--The sulphosalicylic acid photometric method for the determination of iron content |
| GB/T 6150.19 | 鎢精礦化學分析方法5-Br-PADAP光度法測定銻量 | Methods for chemical analysis of tungsten concentrates--The 2-(5-bromo-pyridylazo)-5-diethylaminophenol photometric method for the determination of antimony content |
| GB/T 6150.2 | 鎢精礦化學分析方法碘酸鉀容量法測定錫量 | Methods for chemical analysisof tungsten concentrates--The potassium iodate volumetric method for the determination of tin content |
| GB/T 6150.3 | 鎢精礦化學分析方法 水楊基熒光酮-氯化十四烷基吡啶光度法測定錫量 | Methods for chemical analysis of tungsten concentrates--The salicylfluorone-tetradecyl pyridine chloride photo-metric method for the determination of tin content |
| GB/T 6150.4 | 鎢精礦化學分析方法鉬黃光度法測定磷量 | Methods for chemical analysis of tungsten concentrates--The molybdenum yellow photometric method for the determination of phosphorus content |
| GB/T 6150.5 | 鎢精礦化學分析方法硫酸鋇重量法測定硫量 | Methods for chemical analysisof tungsten concentrates--The barium sulfate gravimetric method for the determination of sulfur content |
| GB/T 6150.6 | 鎢精礦化學分析方法EDTA容量法測定鈣量 | Methods for chemical analysis of tungsten concentrates--The EDTA volumetric method for the determination of calcium content |
| GB/T 6150.7 | 鎢精礦化學分析方法原子吸收分光光度法測定鈣量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of calcium content |
| GB/T 6150.8 | 鎢精礦化學分析方法重量法測定濕存水量 | Methods for chemical analysis of tungsten concentrates--The gravimetric method for the determination hygro-scopic moisture content |
| GB/T 6150.9 | 鎢精礦化學分析方法氯代磺酚S 光度法測定鈮量丁基羅丹明B 萃取光度法測定鉭量 | Methods for chemical analysis of tungsten concentrates--The chlorosulphophenol S photometric method for the determination niobium content--The butylrhodamine B extraction photometric method for the determination tantalum content |
| GB/T 7731.1 | 鎢鐵化學分析方法辛可寧重量法測定鎢量 | Methods for chemical analysis of ferrotungsten--The cinchonine gravimetric method for the determination of tungsten content |
| GB/T 7731.10 | 鎢鐵化學分析方法紅外線吸收法測定碳量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content |
| GB/T 7731.12 | 鎢鐵化學分析方法紅外線吸收法測定硫量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content |
| GB/T 7731.13 | 鎢鐵化學分析方法燃燒中和滴定法測定硫量 | Methods for chemical analysisof ferrotungsten--The combustion-neutralization titration method for the determination of sulfur content |
| GB/T 7731.14 | 鎢鐵化學分析方法極譜法測定鉛量 | Methods for chemical analysis of ferrotungsten--The polarographic method for the determination of lead content |
| GB/T 7731.15 | 鎢鐵化學分析方法火焰原子吸收光譜法測定銅量 | Methods for chemical analysis of ferrotungsten--The flame atomic absorption spectrometric method for thedetermination of copper content |
| GB/T 7731.2 | 鎢鐵 錳含量的測定 高碘酸鹽分光光度法和火焰原子吸收光譜法 | () |
| GB/T 7731.3 | 鎢鐵化學分析方法雙環己酮草酰二腙光度法測定銅量 | Methods for chemical analysis of ferrotungsten--The bis (cyclohexanone) oxalyldihydrazone photometric method for the determination of copper content |
| GB/T 7731.4 | 鎢鐵化學分析方法鉬藍光度法測定磷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of phosphorus content |
| GB/T 7731.5 | 鎢鐵化學分析方法鉬藍光度法測定硅量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of silicon content |
| GB/T 7731.6 | 鎢鐵化學分析方法鉬藍光度法測定砷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of arsenic content |
| GB/T 7731.7 | 鎢鐵化學分析方法苯基熒光酮光度法測定錫量 | Methods for chemical analysis of ferrotungsten--The phenylfluorone photometric method for the determinationof tin content |
| GB/T 7731.8 | 鎢鐵化學分析方法羅丹明B光度法測定銻量 | Methods for chemical analysis of ferrotungsten--The tetraethylrhodamine photometric method for the determination of antimony content |
| GB/T 7731.9 | 鎢鐵化學分析方法碘化鉍光度法測定鉍量 | Methods for chemical analysis of ferrotungsten--The bismuth iodide photometric method for the determinationof bismuth content |
| GB/T 8320 | 銅鎢及銀鎢電觸頭 | Copper-tungsten and silver-tungsten electrical contacts |
| IEC 60064 AMD 1 | 家庭及類似場合普通照明用鎢絲燈.性能要求.修改件1 | Tungsten filament lamps for domestic and similar general ligthing purposes - Performance requirements; Amendment 1 |
| IEC 60064 AMD 2 | 家用和類似用途的普通照明用鎢絲燈.性能要求.修改件2 | Tungsten filament lamps for domestic and similar general ligthing purposes - Performance requirements; Amendment 2 |
| IEC 60064 AMD 3 | 修改件3.家用及類似場合普通照明用鎢絲燈.性能要求 | Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| IEC 60064 Edition 6.3 | 家用和類似用途的普通照明用鎢絲燈.性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| IEC 60064 | 家庭及類似場合普通照明用鎢絲燈 性能要求 | Tungsten filament lamps for domestic and similar general ligthing purposes; performance requirements |
| IEC 60357 AMD 1 | 鹵鎢燈(非車輛用).性能規范.修改件1 | Tungsten halogen lamps (non-vehicle) - Performance specifications; Amendment 1 |
| IEC 60357 | 鹵鎢燈(非車輛用).性能規范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| IEC 60432-1 AMD 1 | 修改件1.白熾燈.安全規范.第1部分:家用和類似場合普通照明用鎢絲燈 | Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-1 Edition 2.1 | 白熾燈.安全規范.第1部分:家用及類似場合普通照明用鎢絲燈 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-1 | 白熾燈 安全規范 第1部分:家庭及類似場合普通照明用鎢絲燈 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-2 AMD 1 | 修改件1.白熾燈.安全規范.第2部分:家用和類似場合普通照明用鎢鹵燈 | Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-2 Edition 2.1 | 白熾燈.安全規范.第1部分:家用及類似場合普通照明用鹵鎢燈 | Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-2 | 白熾燈 安全規范 第2部分:家庭及類似場合普通照明用鹵鎢燈 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-3 AMD 1 | 修改件1.白熾燈.安全規范.第3部分:鎢鹵燈(非車用) | Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 Edition 1.1 | 白熾燈.安全規范.第3部分:鎢鹵燈(非車用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 | 白熾燈.安全規范.第3部分:鹵鎢燈(非車用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60598-2-23 AMD 1 | 燈具 第2部分:特殊要求 第23節:鎢絲燈用特低電壓照明系統 修改1 | Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps |
| IEC 60598-2-23 | 燈具 第2部分:特殊要求 第23節:鎢絲燈用特低電壓照明系統 | Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems for filament lamps |
| IEC 60598-2-6 AMD 1 | 燈具 第2部分:特殊要求 第6節:內裝變壓器的鎢絲燈燈具 修改1 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps; Amendment 1 |
| IEC 60598-2-6 Interpretation Sheet 1 | 燈具.第2部分:特殊要求.第6節:內裝變壓器的鎢絲燈燈具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60598-2-6 | 燈具 第2部分:特殊要求 第6節:內裝變壓器的鎢絲燈燈具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60682 AMD 1 | 石英鹵鎢燈夾封部位溫度的標準測量方法 修改1 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60682 AMD 2 | 石英鹵鎢燈夾封部位溫度的標準測量方法 修改2 | Method of measuring the pinch temperature of quartz glass lamps; Amendment 2 |
| IEC 60682 | 石英鹵鎢燈夾封部位溫度的標準測量方法 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60809 AMD 1 | 道路機動車輛用鎢絲燈 尺寸、電及光的要求 修改1 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 1 |
| IEC 61047 | 鎢絲燈用交直流供電電子降壓轉換器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| IEC 61558-2-9 | 電力變壓器、供電設備及類似設備的安全.第2-9部分:Ⅲ類手用鎢絲燈的壓變壓器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| ISO 10650-1 | 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps |
| ISO 13276 | 煙草和煙草制品 煙堿純度的測定 使用鎢硅酸的重量分析法 | Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid |
| ISO 13899-2 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子體原子發射光譜法.第2部分:鈮含量測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content |
| ISO 4552-2 | 鐵合金 化學分析用樣品的取制樣 第2部分:鈦鐵、鉬鐵、鎢鐵、鉭鐵、鈮鐵和釩鐵 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium |
| ISO 5450 | 鎢鐵 規范和交貨條件 | Ferrotungsten; Specification and conditions of delivery |
| ISO 553 | 錳礦石 釩含量的測定 滴定法和磷鎢釩酸鹽光度法 | Manganese ores; Determination of vanadium content; Titrimetric method and phosphotungstovanadate photometric method |
| ISO 5832-5 | 外科植入物.金屬材料.第5部分:鍛造鈷鉻鎢鎳合金 | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 5832-8 | 外科植入物 金屬材料 第8部分:鍛造鈷鎳鉻鉬鎢鐵合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 636 | 焊接消耗品.非合金鋼和細粒鋼的鎢惰性氣體焊用焊條、焊絲和溶敷金屬.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6848 | 電弧焊和切割.非自耗鎢電極.分類 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification |
| ISO 7100 | 工業(包括食品)用磷酸 釩含量的測定 磷鎢釩酸鹽光譜法 | Phosphoric acid for industrial use (including foodstuffs); Determination of vanadium content; Phosphotungsten vanadate spectrometric method |
| ISO 7693 | 鎢鐵 鎢含量的測定 喹啉(Cinchonine)重量法 | Ferrotungsten; Determination of tungsten content; Cinchonine gravimetric method |
| ISO 9692-3 | 焊接和相關工藝 接頭制備的建議 第3部分:鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO/TS 13899-1 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子原子發射光譜法.第1部分:鉬含量的測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content |
| ISO/TS 13899-3 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子體原子發射光譜法.第3部分:鎢含量的測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content |
| JB/T 4107.2 | 電觸頭材料化學分析方法 銅鎢中銅含量的測定(碘量法) | () |
| JB/T 4107.4 | 電觸頭材料化學分析方法 銀鎢中銀含量的測定(碘量法) | () |
| JB/T 5336 | 銅鎢電觸頭用鎢粉 技術條件 | () |
| JB/T 5401 | 快速測量鋼液溫度用鎢錸熱電偶絲 | () |
| JB/T 5402 | 快速測量鋼液溫度用鎢錸熱電偶絲 熱電動勢測試方法 | () |
| JB/T 7775.1 | 銅鎢碳化鎢真空觸頭材料化學分析方法 碘量法測定銅量 | () |
| JB/T 7775.2 | 銅鎢碳化鎢真空觸頭材料化學分析方法 絡合滴定法測定銅量 | () |
| JB/T 7775.3 | 銅鎢碳化鎢真空觸頭材料化學分析方法 氣體容量法測定碳量 | () |
| JB/T 7778.1 | 銀碳化鎢電觸頭材料化學分析方法 硫氰酸鹽容量法測定銀量 | () |
| JB/T 7778.2 | 銀碳化鎢電觸頭材料化學分析方法 丁二酮肟分光光度法測定鎳量 | () |
| JB/T 7778.3 | 銀碳化鎢電觸頭材料化學分析方法 氣體容量法測定總碳量 | () |
| JB/T 7778.4 | 銀碳化鎢電觸頭材料化學分析方法 酸分離--氣體容量法測定游離碳量 | () |
| JB/T 7779 | 銀碳化鎢(12)石墨(3)電觸頭 技術條件 | () |
| JB/T 7855 | 碳化鎢鋼結硬質合金自由鍛件 技術條件 | () |
| JB/T 8747 | 手工鎢極惰性氣體保護弧焊機(TIG焊機)技術條件 | () |
| JB/T 9185 | 鎢極惰性氣體保護焊工藝方法 | () |
| JB/T 9440 | 靜電復印機定影鹵鎢燈管 | () |
| JB/T 9441 | 靜電復印機曝光鹵鎢燈管 | () |
| JB/T 9496 | 鎢錸熱電偶用補償導線 | () |
| JB/T 9497 | 鎢錸熱電偶絲及分度表 | () |
| JB/T 9687.2 | 電力半導體器件用鎢圓片 | () |
| JB/T 9860.1 | 斷電器用鎢觸點 技術條件 | () |
| JB/T 9860.2 | 斷電器觸點用鎢桿 技術條件 | () |
| JIS C7501 | 普通照明用鎢絲燈 | Tungsten filament lamps for general lighting purposes |
| JIS C7527 | 鹵鎢燈(非車輛用).性能規范 | Tungsten halogen lamps (non-vehicle) -- Performance specifications |
| JIS C7551-1 | 白熾燈安全規范.第1部分:家用和類似照明用途的鎢絲燈 | Safety specifications for incandescent lamps -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| JIS C7551-2 | 白熾燈.安全規范.第2部分:家用和類似照明用途的鹵鎢燈 | Incandescent lamps -- Safety specifications -- Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| JIS C7551-3 | 白熾燈.安全規范.第3部分:鹵鎢燈(非機動車) | Incandescent lamps -- Safety specifications -- Part 3: Tungsten halogen lamps (non-vehicle) |
| JIS C7711 | 白熾鎢絲燈安裝燈絲的命名方法 | Designation method for mounted filaments of incandescent tungsten lamps |
| JIS G1220 | 鋼鐵.鎢含量的測定方法 | Iron and steel -- Methods for determination of tungsten content |
| JIS G1316 | 鎢鐵的化學分析方法 | Method for chemical analysis of ferrotungsten |
| JIS G1602 | 鐵合金化學分析取樣方法(第2部分:鎢鐵、鉬鐵、釩鐵、鈦鐵和鈮鐵合金) | Methods of sampling for chemical analysis of ferroalloys (Part 2: Ferrotungsten, ferromolybdenum, ferrovanadium, ferrotitanium and ferroniobium) |
| JIS G2306 | 鎢鐵 | Ferrotungsten |
| JIS H1282 | 鎳合金中鎢含量的測定方法 | Methods for determination of tungsten in nickel alloys |
| JIS H1402 AMD 1 | 鎢粉及碳化鎢粉的化學分析方法（修改件1） | Methods for chemical analysis of tungsten powder and tungsten carbide powder (Amendment 1) |
| JIS H1402 | 鎢粉及碳化鎢粉的化學分析方法 | Methods for chemical analysis of tungsten powder and tungsten carbide powder |
| JIS H1403 | 鎢材料的化學分析方法 タングステン材料の分析方法 | Methods for chemical analysis of tungsten materials |
| JIS H1405 | 加有氧化釷的鎢絲材料的化學分析方法 | Methods for chemical analysis of thoriated tungsten materials |
| JIS H1674 | 鋅和鋅合金中鎢含量的測定方法 | Methods for determination of tungsten in zirconium and zirconium alloys |
| JIS H2116 ERRATUM 1 | 鎢粉及碳化鎢粉(勘誤1) | Tungsten powder and tungsten carbide powder (Erratum 1) |
| JIS H2116 | 鎢粉及碳化鎢粉 | Tungsten powder and tungsten carbide powder |
| JIS H4460 | 照明及電子設備用鎢和鉬材料試驗通則 | General rules for test of tungsten and molybdenum materials for lighting and electronic equipments |
| JIS H4461 | 照明和電子設備用鎢絲 | Tungsten wires for lighting and electronic equipments |
| JIS H4463 | 照明及電子設備用加有氧化釷的鎢絲和棒 | Thoriated tungsten wires and rods for lighting and electronic equipment |
| JIS K8612 | 鎢酸鈉六二水合物 | Sodium tungstate (VI) dihydrate |
| JIS M8128 | 礦石中鎢的測定方法 | Methods for determination of tungsten in ores |
| JIS T7402-3 | 外科植入物用鈷基合金.第3部分:鍛制的鈷-鉻-鎢-鎳合金 | Cobalt based alloys for surgical implant applications -- Part 3: Wrought cobalt-chromium-tungsten-nickel alloy |
| JIS Z3233 ERRATUM 1 | 惰性氣體保護弧焊用鎢焊條(勘誤1) | (Erratum 1) |
| JIS Z3233 | 等離子切割和焊接用惰性氣體保護弧焊用鎢焊條 | Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding |
| JIS Z3316 | 低碳鋼及低合金鋼用惰性氣體保護鎢極電弧焊條及焊絲 | TIG welding rods and solid wires for mild steel and low alloy steel |
| NF A10-801 | 鎢鐵的化學分析.硅的測定.重量法 | (CHEMICAL ANALYSIS OF FERRO-TUNGSTEN. GRAVIMETRIC DETERMINATION OF SILICON.) |
| NF A10-809 | 鎢鐵的化學分析.鎢的測定.重量法 | (Chemical analysis of ferro-tungsten. Gravimetric determination of tungsten.) |
| NF A10-813 | 鎢鐵的化學分析.錫的測定.分光光度法 | (CHEMICAL ANALYSIS OF FERRO-TUNGSTEN. SPECTROPHOTOMETRIC DETERMINATION OF TIN.) |
| NF A81-011 | 編號.用于惰性氣體弧焊的鎢電報和等離子切割 | (Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding. Codification.) |
| NF A81-325 | 焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A87-013-3 | 焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF C52-558-2-9 | 電力變壓器、供電設備及類似設備的安全.第2-9部分:Ⅲ類手用鎢絲燈的變壓器的特殊要求 | (Safety of power transformers, power supply units and similar products - Part 2-9 : particular requirements for transformers for class III handlamps for tungsten filament lamps.) |
| NF C72-100 | 家用和類似用途的一般照明用鎢絲燈.性能要求 | (Tungsten filamnet lamps for domestic and similar general lighting purposes. Performance requirements.) |
| NF C72-100/A2 | 家用和類似用途普通照明用鎢絲燈.性能要求 | (Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements.) |
| NF C72-101-1 | 白熾燈安全規范.第1部分:家用和類似用途的一般照明用鎢絲燈 | (Incandescent lamps - Safety specifications - Part 1 : tungsten filament lamps for domestic and similar general lighting purposes.) |
| NF C72-101-2 | 白熾燈安全規范.第2部分:家用和類似一般照明用鎢絲鹵素?zé)? | (Incandescent lamps - Safety specifications - Part 2 : Tungsten halogen lamps for domestic and similar general lighting purposes.) |
| NF C72-101-3 | 白熾燈.安全規范.第3部分:鹵鎢燈(非車用) | (Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).) |
| NF C72-104 | 石英鹵鎢燈電極座溫度測定的標準方法 | (Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps.) |
| NF C72-105 | 鹵鎢燈(非車輛用).性能規范 | (Tungsten halogen lamps (non-vehicle) - Performance specifications.) |
| NF S94-055 | 外科用植入物.金屬材料.第5部分:鍛制鈷-鉻-鎢-鎳合金 | (Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.) |
| NF S94-058 | 外科植入物.金屬材料.第8部分:鍛壓的鈷鎳鉻鉬鎢鐵合金 | (Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.) |
| NF V37-033 | 煙草和煙草制品.尼古丁純度的測定.使用鎢硅酸的重量分析法 | (Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid.) |
| QB/T 1116.2 | 儀器燈泡 鹵鎢燈 | Instrument lamps-Tungsten halogen lamps |
| QB/T 3735 | 絞合鎢絲線圈 | Stranded tungsten wire coils |
| QB/T 3736 | 石英鹵鎢燈夾封部位溫度的標準測量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
| YB/T 3220.9-1987(2005) | 寶鋼二高爐設備制造通用技術條件 鈷、鉻、鎢硬質合金堆焊（試行） | () |
| YS/T 231 | 鎢精礦 | Tungsten concentrate |
| YS/T 240.4 | 鉍精礦化學分析方法 三氧化鎢量的測定 硫氰酸鹽分光光度法 | Methods for chemical analysis of bismuth concentrate-Determination of tungsten trioxide content-Thiocyanate spectrophotometric method |
| YS/T 372.17 | 貴金屬合金元素分析方法 鎢量和錸量的測定 鎢酸重量法和硫脲分光光度法 | () |
| YS/T 374.7-1994(2005) | 鉑鎢錸合金化學分析方法 | () |
| YS/T 39 | 氙燈鎢陽極 | Tungsten anodes for xenon lamps |
| YS/T 500 | 鎢鈰合金中鈰的測定 氧化還原容量法 | () |
| YS/T 501 | 鎢釷合金中二氧化釷的測定 重量法 | () |
| YS/T 502 | 鎢錸合金中錸的測定 丁二酮肟比色法 | () |
| YS/T 508 | 鎢鉬合金化學分析方法 EDTA容量法測定鉬量 | () |
| YS/T 511 | 鈷包碳化鎢復合粉 | () |
| YS/T 515 | 鎢絲下垂試驗方法 | () |
| YS/T 516 | 鎢絲二次再結晶溫度測量方法 | () |
| YS/T 524 | 合成白鎢技術條件 | () |
| YS/T 539.11 | 鎳基合金粉化學分析方法 辛可寧重量法測定鎢量 | () |
| YS/T 555.8 | 鉬精礦化學分析方法 鎢量的測定 | () |
| YS/T 559 | 鎢的發射光譜分析方法 | () |
| YS/T 659 | 鎢及鎢合金加工產品牌號和化學成分 | Designation and composition of tungsten and tungsten alloy wrought product |
| 編號 | 中文名稱 | 英文名稱 |