微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM A210 | 鍋爐和過熱器用中碳素?zé)o縫鋼管規范 | Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ASTM A 252 | 焊接鋼和無縫鋼管樁的標準規范 | Standard Specification for Welded and Seamless Steel Pipe Piles |
| ASTM A 53/A 53M | 黑色和熱浸鍍鋅焊接及無縫鋼管的標準規范 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 714 | 高強度低合金焊接和無縫鋼管的標準規范 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| ASTM A 795/A 795M | 消防用黑色和熱浸鍍鋅焊接鋼管及無縫鋼管用標準規范 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| ASTM B 861a | 鈦和鈦合金無縫鋼管的標準規范 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| BS 4T 100 | 無縫鋼管和管材的檢驗、試驗和驗收程序 | Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock |
| BS EN 10216-1 | 承壓用的無縫鋼管.交付技術狀態.規定了室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions |
| BS EN 10216-2 | 承壓用的無縫鋼管.交付技術狀態.規定了高溫特性的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10216-3 | 承壓用的無縫鋼管.交付技術狀態.合金細晶粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
| BS EN 10216-4 | 承壓用的無縫鋼管.交付技術狀態.規定了低溫特性的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions |
| BS EN 10216-5 | 壓力無縫鋼管.交貨技術條件.無縫鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
| BS EN 10246-6 | 鋼管的無損檢驗.橫向缺陷探測用無縫鋼管的自動全周界超聲波檢驗 | Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| BS EN ISO 11120 | 氣瓶.1501升-30001升水容量的可再填充的無縫鋼管.設計,結構和試驗 | Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing |
| BS EN ISO 13680 | 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| DD ENV 10220 | 無縫鋼管和焊接鋼管.尺寸及單位長度質量 | Seamless and welded steel tubes. Dimensions and masses per unit length |
| DIN 2445 Bb.1 | 承受動態載荷的無縫鋼管.設計規則 | Seamless steel tubes for dynamic loads - Design rules |
| DIN 2445-1 | 承受動態載荷的無縫鋼管.第1部分:流體系統用壓力為100至500巴的熱軋管 | Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar |
| DIN 2445-2 | 承受動態載荷的無縫鋼管.第2部分:流體系統用壓力為100至500巴的精密鋼管 | Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar |
| DIN 28180 | 管式熱交換器用無縫鋼管.尺寸和材料 | Seamless steel tubes for tubular heat exchangers - Dimensions and materials |
| DIN EN 10216-1 | 壓力載荷用無縫鋼管.交貨技術條件.第1部分:特定室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004 |
| DIN EN 10216-2 | 壓力用無縫鋼管.交貨技術條件.第2部分:帶特定高溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007 |
| DIN EN 10216-3 | 壓力載荷用無縫鋼管.交貨技術條件.第3部分:合金細粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004 |
| DIN EN 10216-4 | 壓力載荷用無縫鋼管.交貨技術條件.第4部分:帶特定低溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004 |
| DIN EN 10216-5 | 壓力用途無縫鋼管.交貨技術條件.第5部分:不銹鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004 |
| DIN EN 10246-4 | 鋼管的無損檢驗.第4部分:鐵磁無縫鋼管橫向缺陷檢測用自動全外周磁換能器檢驗/磁漏檢驗 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
| DIN EN 10246-6 | 鋼管的無損檢驗.第6部分:無縫鋼管橫向缺陷探測的自動全周長超聲波試驗 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999 |
| DIN EN 10297-2 | 機械和一般工程用無縫鋼管.交貨技術條件.第2部分:不銹鋼.德文版本EN 10297-2 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10297-2:2005 |
| EN 10216-1 | 壓力用途的無縫鋼管 交貨技術條件 第1部分：有規定室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07). |
| EN 10216-2 | 壓力用途的無縫鋼管 交貨技術條件 第2部分：有規定高溫特性的非合金及合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07). |
| EN 10216-3 | 壓力用途的無縫鋼管 交貨技術條件 第3部分：合金細晶粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07). |
| EN 10216-4 | 壓力用途的無縫鋼管 交貨技術條件 第4部分：有規定低溫特性的非合金及合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07). |
| EN 10246-6 | 鋼管的無損檢測 第6部分：橫向缺陷探測用無縫鋼管的自動全周界超聲檢驗 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| EN 10305-1 | 高精密度用途的鋼管 交貨技術條件 第1部分：冷拔無縫鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10305-4 | 高精密度用途的鋼管 交貨技術條件 第4部分：液壓和氣動系統用冷拔無縫鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN ISO 13680 | 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
| FZ/T 92046 | 平焊管法蘭(無縫鋼管用) | () |
| GB 13296 | 鍋爐、熱交換器用不銹鋼無縫鋼管 | Seamless stainless steel tubes for boiler and heat exchanger |
| GB 18248 | 氣瓶用無縫鋼管 | Seamless steel tubes for gas cylinder |
| GB 3087 | 低中壓鍋爐用無縫鋼管 | Seamless steel tubes for lowand medium pressure |
| GB 5310 | 高壓鍋爐用無縫鋼管 | Seamless steel tubes and pipes for high pressure boiler |
| GB 6479 | 高壓化肥設備用無縫鋼管 | Seamless steel tubes for high-pressure for chemical fertilizer equipments |
| GB 9948 | 石油裂化用無縫鋼管 | Seamless steel tubes for petroleum cracking |
| GB/T 12459 | 鋼制對焊無縫管件 | Steel butt-welding seamless pipe fittings |
| GB/T 14975 | 結構用不銹鋼無縫鋼管 | Stainless steel seamless tubes for structures |
| GB/T 14976 | 流體輸送用不銹鋼無縫鋼管 | Stainless steel seamless tubes for fluid transport |
| GB/T 17395 | 無縫鋼管尺寸、外形、重量及允許偏差 | Dimensions，shapes，masses and tolerances of seamless steel tubes |
| GB/T 17396 | 液壓支柱用熱軋無縫鋼管 | Seamless hot-rolled steel tubes for hydraulic pillar service |
| GB/T 18984 | 低溫管道用無縫鋼管 | Seamless steel tubes for low-temperature-servicepiping |
| GB/T 20409 | 高壓鍋爐用內螺紋無縫鋼管 | Multi-rifled seamless steel tubes for high-pressure boiler |
| GB/T 3089 | 不銹耐酸鋼極薄壁無縫鋼管 | Thinnest-wall seamless tubes of stainless and acid-resistance steel |
| GB/T 3090 | 不銹鋼小直徑無縫鋼管 | Stainless steel small diameter seamless steel tubes |
| GB/T 3093 | 柴油機用高壓無縫鋼管 | High-pressure seamless steel tubes for diesel engine |
| GB/T 3639 | 冷拔或冷軋精密無縫鋼管 | Cold-drawn or cold-rolled precision seamless steel tubes |
| GB/T 5312 | 船舶用碳鋼和碳錳鋼無縫鋼管 | Carbon and carbon-manganese steel seamlesssteel tubes and pipes for ship |
| GB/T 5777 | 無縫鋼管超聲波探傷檢驗方法 | Seamless steel pipe and tubing--Methods forultrasonic testing |
| GB/T 8162 | 結構用無縫鋼管 | Seamless steel tubes for structural purposes |
| GB/T 8163 | 輸送流體用無縫鋼管 | Seamless steel tubes for liquid service |
| GB/T 8183 | 鈮及鈮合金無縫管 | Niobium and niobium alloy seamless tubes |
| GB/T 8890 | 熱交換器用銅合金無縫管 | Seamless copper alloy tube for heat-exchanger |
| ISO 10124 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 層狀缺陷檢測用超聲檢驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections |
| ISO 10332 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 驗證液壓防泄漏用超聲波檢驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness |
| ISO 11120 | 氣瓶 150升～3000升水容量的可重復充裝無縫鋼管氣瓶 設計、結構和試驗 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing |
| ISO 13680 Technical Corrigendum 2 | 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2 |
| ISO 13680 | 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| ISO 2937 | 機械用光端無縫鋼管 | Plain end seamless steel tubes for mechanical application |
| ISO 3304 | 光端精密無縫鋼管 交貨技術條件 | Plain end seamless precision steel tubes; Technical conditions for delivery |
| ISO 4200 | 光端焊接和無縫鋼管 管的尺寸和單位長度重量的一覽表 | Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length |
| ISO 6207 | 鎳和鎳合金無縫管 | Seamless nickel and nickel alloy tube |
| ISO 6759 | 熱交換器用無縫鋼管 | Seamless steel tubes for heat exchangers |
| ISO 9302 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 液壓密封驗證電磁試驗法 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness |
| ISO 9303 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用全周邊超聲波試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 9304 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測缺陷用渦流電流試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections |
| ISO 9305 | 壓力用途的無縫鋼管 橫向缺陷全周邊超聲電流檢驗 | Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections |
| ISO 9329-1 | 壓力用途的無縫鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼 | Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties |
| ISO 9329-2 | 壓力用途的無縫鋼管 交貨技術條件 第2部分:規定高溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ISO 9329-3 | 壓力用途的無縫鋼管 交貨技術條件 第3部分:規定低溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 9329-4 | 壓力用途的無縫鋼管 交貨技術條件 第4部分:奧氏體不銹鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels |
| ISO 9402 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO 9598 | 壓力用途的無縫鋼管 檢測橫向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗 | Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| JB/T 8120.1 | 壓燃式發動機 高壓油管用鋼管第1部分:單壁冷拉無縫鋼管 技術條件 | () |
| JIS G3429 | 高壓氣瓶用無縫鋼管 | Seamless steel tubes for high pressure gas cylinder |
| JIS G3465 | 鉆井用無縫鋼管 | Seamless steel tubes for drilling |
| JIS G4903 | 鎳鉻鐵合金無縫管 | Seamless nickel-chromium-iron alloy pipes |
| JIS G4904 | 熱交換器用鎳鉻鐵合金無縫管 | Seamless nickel-chromium-iron alloy heat exchanger tubes |
| JIS G7215 | 機械用光端無縫鋼管(ISO規范) | Plain end seamless steel tubes for mechanical application (ISO specifications) |
| JIS G7219 | 承壓用無縫鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼(ISO規范) | Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties (ISO specifications) |
| JIS G7220 | 承壓用無縫鋼管.交貨技術條件.第2部分:規定高溫特性的非合金鋼及合金鋼(ISO規范) | Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties (ISO specifications) |
| JIS G7221 | 承壓用無縫鋼管.交貨技術條件.第3部分:規定低溫特性的非合金鋼及合金鋼(ISO規范) | Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties (ISO specifications) |
| JIS G7222 | 承壓用無縫鋼管.交貨技術條件.第4部分:奧氏體不銹鋼(ISO規范) | Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels (ISO specifications) |
| JIS H3300 | 銅和銅合金無縫鋼管 | Copper and copper alloy seamless pipes and tubes |
| JIS H3510 | 電子設備用無氧銅薄片、板材、帶材、無縫鋼管、桿材、棒材和線材 | Oxygen free copper sheets, plates, strips, seamless pipes and tubes, rods, bars and wires for electron devices |
| JIS H4202 | 鎂合金無縫管 | Magnesium alloy seamless pipes and tubes |
| JIS H4552 | 鎳及鎳合金無縫管 | Nickel and nickel alloy seamless pipes and tubes |
| NF A49-005 | 焊接和無縫鋼管.管的尺寸和單位長度重量的一覽表 | (Seamless and welded steel tubes - General tables of dimensions and masses per unit length.) |
| NF A49-117 | 鋼管.管道和其他用途光端無縫鋼管.鐵素體和奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-214 | 鋼管.耐高溫奧氏體無縫鋼管.（帶標準公差的尺寸.交貨技術條件） | (STEEL TUBES.SEAMLESS AUSTENITIC STEEL TUBES FOR USE AT HIGH TEMPERATURES.DIMENSIONS (WITH NORMAL TOLERANCES).TECHNICAL CONDITIONS OF DELIVERY.) |
| NF A49-218 | 鋼管.奧氏體不銹鋼熔爐用無縫鋼管.（帶標準公差或縮減公差的尺寸.交貨技術條件.） | (STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-220 | 鋼管.高溫用的無縫鋼管.尺寸.交貸的技術條件 | (STEEL TUBES. GROOVED SEAMLESS STEEL TUBES FOR USE AT HIGH TEMPERATURE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-317 | 鋼管.機械用光端無縫鋼管.奧式體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-875-14 | 鋼管的無損檢驗.第14部分:層面缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動超聲試驗 | (Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.) |
| NF A49-875-6 | 鋼管的無損檢驗.第6部分:檢測橫向缺陷用無縫鋼管的自動全周邊超聲試驗 | (Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.) |
| NF A49-875-7 | 鋼管的無損試驗.第7部分:縱向缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動全周邊超聲波試驗 | (Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.) |
| YB/T 2008 | 不銹鋼無縫鋼管圓管坯 | () |
| YB/T 4054 | 無縫鋼管常用穿孔頂頭技術條件 | () |
| YB/T 4124.1 | 熱軋無縫鋼管軋輥技術條件 張力減徑機軋輥和定徑機軋輥 | () |
| YB/T 4124.2 | 熱軋無縫鋼管軋輥技術條件 連軋機軋輥 | () |
| YB/T 4146 | 高碳鉻軸承鋼無縫鋼管 | () |
| YB/T 4173 | 高溫用鍛造鏜孔厚壁無縫鋼管 | Forged and bored seamless steel pipes with heavy wall for high-temperature service |
| YB/T 5035-1996(2006年確認) | 汽車半軸套管用無縫鋼管 | () |
| YB/T 5137 | 高壓用熱軋和鍛制無縫鋼管圓管坯 | () |
| prEN 10216-5 | 壓力用途的無縫鋼管 交貨技術條件 第5部分：不銹鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| prEN 2202 | 航空航天系列 經溶液處理和淀積處理的耐熱合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 無縫鋼管 D | Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated - Seamless tube - D 50 mm, a 3 mm |
| 編號 | 中文名稱 | 英文名稱 |