微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/AIHA Z9.4 | 排風系統.噴砂操作.固定位置通風和安全實施規程 | Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures |
| ASTM C 418 | 用噴砂法測定混凝土抗磨性的標準試驗方法 | Standard Test Method for Abrasion Resistance of Concrete by Sandblasting |
| ASTM D 4417 | 噴砂清理鋼表面輪廓現場測量的標準試驗方法 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4940 | 噴砂磨料水溶解離子污染導電分析的標準試驗方法 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives |
| ASTM D 7055 | 涂層試驗用熱軋?zhí)间摫“鍦?zhǔn)備(噴砂清理)的標準規程 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 7127 | 便攜式記錄儀器測量噴砂清理過的金屬表面粗糙度的標準試驗方法 | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
| BS 2634-2 | 表面粗糙度比對試樣.第2部分:電火花加工、噴丸處理、噴砂處理及拋光試樣規范 | Roughness comparison specimens - Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens |
| BS 7079-F10 | 涂料和相關制品使用前鋼底襯材料的制備.非金屬噴砂清理磨料.鐵鋁榴石 | Preparation of steel substrates before application of paints and related products - Non-metallic blast-cleaning abrasives - Almandite garnet |
| BS EN 10238 | 自動噴砂清理和自動涂底漆的結構鋼制品 | Automatically blast cleaned and automatically primed structural steel products |
| BS EN 2497 | 鈦與鈦合金干噴砂規范 | Specification for dry abrasive blasting of titanium and titanium alloys |
| BS EN ISO 11126-1 | 涂料和其它相關產品應用前鋼底基的預處理.非金屬噴砂清理磨料規范.概述和分類 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - General introduction and classification |
| BS EN ISO 11126-4 | 涂料和其它相關產品應用前鋼基體的預處理.非金屬噴砂清理磨料規范.煤爐熔渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag |
| BS EN ISO 11126-5 | 涂料和其他相關產品應用前鋼基體的預處理.非金屬噴砂清理磨料規范.鎳精練廠礦渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag |
| BS EN ISO 11126-7 | 涂料和相關制品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.熔融氧化鋁規范 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Specification for fused aluminium oxide |
| BS EN ISO 11127-4 | 涂料和相關產品應用前鋼基體的預處理. 非金屬噴砂清理磨料試驗方法.用玻璃劃痕試驗評估硬度 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Assessment of hardness by a glass slide test |
| BS EN ISO 11127-5 | 涂料和相關產品應用前鋼基體的預處理. 非金屬噴砂清理磨料試驗方法.濕度的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of moisture |
| BS EN ISO 11127-6 | 涂料和相關產品應用前鋼基體的預處理. 非金屬噴砂清理磨料試驗方法.用電導性測量測定水溶性雜質 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble contaminants by conductivity measurement |
| BS EN ISO 11127-7 | 涂料和相關產品應用前鋼基體的預處理. 非金屬噴砂清理磨料試驗方法.水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble chlorides |
| BS EN ISO 3861 | 噴砂用橡膠軟管.規范 | Rubber hoses for sand and grit blasting - Specification |
| BS EN ISO 8503-2 | 涂料和有關產品使用前的鋼基體的準備.噴丸處理鋼基體的表面粗糙度.噴砂處理鋼表面輪廓的定級方法.比較方法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
| BS EN ISO 8504-2 | 涂料和有關產品使用前鋼襯底的制備.表面制備方法.磨料噴砂清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Abrasive blast cleaning - Part 2: Abrasive blast cleaning |
| DIN 50315 | 用離心噴砂法試驗金屬磨料的磨損情況和效果 | Testing the wear and effectiveness of metallic abrasives by centrifugal blasting |
| DIN 8589-12 | 排屑加工工藝.第12部分:砂帶磨削(噴砂清理).分類、細分類、術語和定義 | Manufacturing processes chip removal - Part 12: Belt grinding (sanding); Classification, subdivision, terms and definitions |
| DIN EN 12373-10 | 鋁和鋁合金.陽極處理.第10部分:用噴砂試驗測量陽極化氧化涂層的特定平均耐磨性能 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998 |
| DIN EN 1248 | 鑄造機械.噴砂設備的安全要求; 德文版本 EN 1248:2001 | Foundry machinery - Safety requirements for abrasive blasting equipment; German version EN 1248:2001 |
| DIN EN 2497 | 航空航天.鈦和鈦合金的干噴砂處理 | Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989 |
| DIN EN ISO 11126-10 | 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第10部分:鐵鋁石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004 |
| DIN EN ISO 11126-9 | 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004 |
| DIN EN ISO 14877 | 粒狀磨料噴砂操作防護服 | Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002); German version EN ISO 14877:2002 |
| DIN EN ISO 3861 | 噴砂橡膠軟管.規范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 8503-1 | 涂料和相關產品使用前的鋼基體的制備.噴丸處理鋼基體的表面粗糙度特性.第1部分:ISO表面輪廓比較儀的規范和 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:1988); German version EN ISO 8503-1:1995 |
| DIN EN ISO 8503-2 | 涂料和相關產品使用前的鋼基體的制備.噴丸處理鋼基體的表面粗糙度特性.第2部分:噴砂處理表面的定級方法.比 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure (ISO 8503-2:1988); German version EN ISO 8503-2:1995 |
| DIN EN ISO 8503-5 | 涂裝油漆和有關產品前鋼材預處理.噴砂清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004 |
| DIN EN ISO 8504-2 | 使用涂料和相關產品前鋼基材準備.表面準備方法.第2部分:噴砂清潔 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001 |
| EN 10238 | 自動噴砂清理和自動涂底漆結構鋼制品 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| EN 1248 | 鑄造機械 噴砂設備的安全要求 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| EN 2497 | 航空航天系列 鈦與鈦合金干噴砂 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN 271-1995+A1-2000+AC1997 | 呼吸保護裝置 用于噴砂操作的包括護罩的壓縮空氣導管呼吸器或動力推動新鮮空氣軟管呼吸器 要求、測試、標 | Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking |
| EN ISO 3861 | 噴砂用橡膠軟管 規范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) |
| EN ISO 8501-1 Supplement | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分的補充信息：用不同磨料噴砂處理時鋼表面 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast |
| GB/T 2490 | 普通磨具噴砂硬度機檢驗硬度的方法 | Bonded abrasive products--Hardness grade measurement by sand blasting |
| GB/T 6060.5 | 表面粗糙度比較樣塊拋(噴)丸、噴砂加工表面 | Roughness comparison specimens--Shot-blasted and grit-blasted surfaces |
| HG/T 2192 | 噴砂橡膠軟管 | () |
| ISO 14877 | 用粒狀磨料進行噴砂操作用防護服 | Protective clothing for abrasive blasting operations using granular abrasives |
| ISO 3861 | 噴砂清理用橡膠軟管.規范 | Rubber hoses for sand and grit blasting - Specification |
| ISO 8252 | 陽極氧化鋁和鋁合金 用噴砂摩擦試驗儀測定陽極氧化膜的平均耐磨系數 | Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus |
| ISO 8501-1 Supplement | 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分的補充信息:用不同磨料噴砂處理時鋼表面變 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| JB/T 10349 | 干式噴砂機 | () |
| JB/T 10350 | 液體噴砂機 | () |
| JIS Z0310 | 表面制備用噴砂清潔法 | Abrasive blast-cleaning methods for surface preparation |
| JIS Z0311 | 金屬噴砂清洗磨料 | Metallic blast-cleaning abrasives |
| JIS Z0312 | 非金屬噴砂清洗磨料 | Non-metallic blast-cleaning abrasives |
| JIS Z0313 | 涂裝油漆前噴砂清理襯底的評定和試驗 | Test and assessment of abrasive blast-cleaned substrates before application of paints |
| NF A35-511 | 自動化噴砂清理和自動化預制優質鋼產品(歐洲標準EN 10238) | (Automatically blast-cleaned and automatically prefabrication primed structural steel products.) |
| NF C75-304 | 手提式電動工具安全性.第2-4部分:噴砂機的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-4 : particular requirements for sanders.) |
| NF E63-703 | 鑄造機械.噴砂設備的安全要求 | (Foundry Machinery - Safety requirements for abrasive blasting equipment.) |
| NF S76-039 | 呼吸保護設備.噴砂操作用的空氣管線性呼吸儀的要求、檢驗、標記 | (Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing marking.) |
| NF T35-501-1 | 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分:未涂覆鋼襯底和已有覆層全部除去后鋼襯底 | () |
| NF T35-503-1 | 涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第一部分:噴砂處理表面的ISO評定比較樣板 | () |
| NF T35-503-2 | 涂料和有關產品使用前的鋼襯底的制備. 噴丸處理鋼基體的表面粗糙度.第二部分:噴砂處理表面的定級方法.比較 | () |
| NF T35-504-2 | 涂料和有關產品使用前鋼襯底的制備.表面制備方法.第2部分:噴砂清理 | (Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning.) |
| NF T35-505-4 | 涂料和相關產品應用前鋼鐵襯底的準備.金屬噴砂清理磨損的規范.第4部分:低碳鑄鋼的噴射(EN ISO 11124-4) | (Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot.) |
| NF T35-505-7 | 涂料和相關制品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第7部分:熔融氧化鋁 | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 7 : FUSED ALUMINIUM OXIDE. (EUROPEAN STANDARD EN ISO 11126-7).) |
| NF T35-507-6 | 涂料和相關產品應用前鋼襯墊的制備.金屬噴砂清洗粘結劑的試驗方法.第6部分:外來物質的測定(EN ISO 11125-6) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF FOREIGN MATTER. (EUROPEAN STANDARD EN ISO 11125-6).) |
| NF T35-507-7 | 涂料和相關產品應用前鋼襯墊的制備.金屬噴砂清洗粘結劑的試驗方法.第7部分:濕度的測定(EN ISO 11125-7) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 7 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11125-7).) |
| NF T35-508-4 | 涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范 第4部分:煤爐爐渣(EN ISO 11126-4) | (Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 4 : coal furnace slag.) |
| NF T35-508-8 | 涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料規范.第8部分:橄欖砂(EN ISO 11126-8) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 8 : OLIVINE SAND. (EUROPEAN STANDARD EN ISO 11126-8).) |
| NF T35-509-1 | 涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第1部分:抽樣(EN ISO 11127-1) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1 : SAMPLING. (EUROPEAN STANDARD EN ISO 11127-1).) |
| NF T35-509-4 | 涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第4部分:玻璃載片試驗評估硬度(EN ISO 1112 | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4 : ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (EUROPEAN STANDARD EN ISO 11127-4).) |
| NF T35-509-5 | 涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第5部分:濕度測定(EN ISO 11127-5) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11127-5).) |
| NF T35-509-6 | 涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第6部分:導電率測定水溶性污染物(EN ISO 11 | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT. (EUROPEAN STANDARD EN ISO 11127-6)) |
| 編號 | 中文名稱 | 英文名稱 |