微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS EN 472-1995 | 壓力計.詞匯 | Pressure gauges - Vocabulary |
| BS EN 837-1-1998 | 壓力計.波登壓力計.規格,計量,要求和試驗 | Pressure gauges - Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing |
| BS EN 837-2-1998 | 壓力計.壓力計的選擇和安裝推薦規范 | Pressure gauges - Selection and installation recommendations for pressure gauges |
| BS EN 837-3-1998 | 壓力計.膜式壓力計和膜合式壓力計.尺寸、計量、要求和試驗 | Pressure gauges - Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| BS EN 12094-10-2003 | 固定消防系統.氣體滅火系統元件.壓力計和壓力開關的試驗方法和要求 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for pressure gauges and pressure switches |
| BS EN 562-2003 | 氣焊設備.焊接、切割和相關工藝用壓力計 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
| EN 837-1-1996+AC-1998 | 壓力計 第1部分：布登管式壓力計 尺寸、計量、要求和測試 | Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing |
| EN 837-2-1997 | 壓力計 第2部分：壓力計的選擇和安裝建議 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| EN 837-3-1996 | 壓力計 第3部分：薄膜和封裝壓力計 尺寸、計量、要求和測試 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| EN 12094-10-2003 | 固定式消防系統 氣體滅火系統的部件 第10部分：對壓力計壓力開關的要求及試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
| EN 562-2003 | 氣焊設備 焊接、切割和同類處理用壓力計 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
| EN 50216-5-2002+A1-2002 | 電源變壓器及電抗器配件 第5部分：液位指示器 壓力計和流量指示器 | Power transformer and reactor fittings - Part 5: Liquid level, pressure devices and flow indicators |
| GB/T 1226 | 一般壓力表 | General pressure gauge |
| GB/T 1227 | 精密壓力表 | Accurate pressure gauge |
| GB 14106 | 鹵代烷滅火系統壓力表性能要求和試驗方法 | Halon fire extinguishing systems--Performance requirements and test methods for pressure gauges |
| GB/T 18520 | 植物保護機械噴霧機噴頭和壓力表的連接尺寸 | Equipment for crop protection--Sprayers--Connecting dimensions for nozzles and manometers |
| GB/T 3751.1 | 卡套式壓力表管接頭 | Connector for pressure gauge--Assembly |
| GB/T 3751.2 | 卡套式壓力表接頭體 | Connector for pressure gauge--Body |
| GB/T 5645.1 | 擴口式壓力表管接頭 | Flared type tube fittings--Connector for pressure gauge--Assembly |
| GB/T 5645.2 | 擴口式壓力表管接頭體 | Flared type tube fittings--Connector for pressuregauge--Body |
| GB/T 8892 | 壓力表用銅合金管 | Copper alloy tube for pressure gauge |
| DIN 16261 | 壓力表用帶內螺紋/內螺紋和內螺紋/外螺紋連接的PN 16旋塞 | PN 16 cocks with female/female and female/male connection for pressure gauges |
| DIN 16262 | 壓力表用帶調節螺母和軸套式連接的PN 6和PN 16旋塞 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
| DIN 16263 | 壓力表用帶調節螺母、軸套式連接和試驗連接的PN 16旋塞 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
| DIN 16270 | 壓力表用不帶試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves without test connection for pressure gauges |
| ISO 5171 | 焊接、切割及相關工藝用壓力表 | Pressure gauges used in welding, cutting and allied processes |
| JIS F7003 | 造船.船用壓力表的應用 | Shipbuilding -- Application of pressure gauges on board |
| JIS B7505-1999 | 波登管壓力計 | Bourdon tube pressure gauges |
| JIS E4118-2004 | 鐵路機車車輛用波登管壓力計 | Bourdon tube pressure gauges for railway rolling stock |
| DIN 32503 | 用于焊接、切割和相關工藝的外殼直徑為63mm的壓力測量儀( 壓力表)的保護罩. | Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes |
| DIN 75554 | 壓力表 | Pressure gauges |
| DIN EN 12645 | 壓力表.汽車輪胎的壓力和充氣檢驗設備.計量、要求和試驗 | Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:1998 |
| DIN 14421 | 消防泵用壓力表(測壓表) | Pressure gauges (manometer) for fire pumps |
| DIN EN 562 | 氣焊設備.焊接、切割和相關工藝用壓力表 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003 |
| DIN 16284 | 壓力表及其附件用螺紋接套連接 | Nipple connections for pressure gauges and their accessories |
| DIN 16287 | 壓力表用閥門和旋塞的試驗連接用蓋 | Caps for test connection on valves and cocks for pressure gauges |
| DIN 16283 | 壓力表及其附件用調整螺母 | Adjusting nuts for pressure gauges and their accessories |
| DIN 16271 | 壓力表用帶試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves with test connection for pressure gauges |
| DIN 16272 | 壓力表用帶關閉試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| DIN 16282 | 壓力表及其附件用彎管 | Siphons for pressure gauges and their accessories |
| BS 2G 113 | 飛行器用進氣管壓力表規范 | Specification for manifold pressure gauges for aircraft |
| JB/T 6804 | 抗震壓力表 | Shock-resistant pressure gauge |
| JB/T 7392 | 數字壓力表 | Digital pressure instrument |
| NF L72-310 | 航空器材.圓盤式機載壓力表 | (Aircraft equipment. On board pressure indicator with round dials.) |
| NF U16-101 | 農用拖車.套管筒式單動作抓斗式起重拖車.系列25進氣壓力表(MPa) | (250bar2,3型.互換尺寸 (AGRICULTURAL TRAILERS. SINGLE-ACTING TELESCOPIC TIPPING CYLINDERS. 25 MPA (250 BAR) SERIES. TYPLES 1,2 AND 3. INTERCHANGEABILITY DIMENSIONS.) |
| NF E15-038 | 工業壓力表.金屬指示壓力表.絕對壓力計 | (INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.) |
| NF B35-701 | 實驗室用玻璃器皿.電離壓力表 | (LABORATORY GLASSWARE. IONISATION MANOMETERS.) |
| JB/T 9275 | 電接點膜盒壓力表 | () |
| JB/T 9271 | 焊接、切割及類似工藝用壓力表 | () |
| JB/T 50040 | 彈性式壓力表 可靠性技術要求與考核方法 | () |
| JB/T 599 | 壓力表校驗器 | () |
| JB/T 5528 | 壓力表標度及分劃 | () |
| JB/T 5491 | 膜片壓力表 | () |
| JB/T 5527 | 船用壓力表 | () |
| JB/T 8839.2 | 內燃機用磁電式壓力表 試驗方法 | () |
| JB/T 10203 | 遠傳壓力表 | () |
| JJG（石油） 32-94 | 耐（抗）震壓力表 | () |
| JB/T 7696.1-1995 | 工程機械用壓力表 | () |
| JB/T 6801-1993 | 壓力表阻尼器 技術條件 | () |
| JB/T 6805-1993 | 壓力表接點裝置 技術條件 | () |
| JB/T 8624-1997 | 隔膜式壓力表 | () |
| JB/T 8839.1-1999 | 內燃機用磁電式壓力表 技術條件 | () |
| JB/T 2001.22-1999 | 水系統 壓力表開關 型式與尺寸(PN=31.5MPa) | () |
| JB/T 9842-1999 | 拖拉機、內燃機用彈簧管式壓力表 | () |
| JB/T 9273-1999 | 電接點壓力表 | () |
| JB/T 9277-1999 | 壓力表誤差表 | () |
| JB/T 9272-1999 | 氨壓力表 | () |
| JB/T 9274-1999 | 膜盒壓力表 | () |
| JB/T 9278-1999 | 壓力表齒輪傳動機構 技術條件 | () |
| JB/T 6385-2007 | 錐密封焊接式壓力表管接頭 | () |
| 編號 | 中文名稱 | 英文名稱 |