微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A03-117 | 鋼鐵產品的質量檢驗 | (Quality control surveillance of steel products.) |
| NF A03-157 | 鋼鐵產品.鋼材的彎曲試驗 | (IRON AND STEEL. BEND TEST ON STEEL.) |
| NF A03-157 | 鋼鐵產品.鋼材的彎曲試驗 | (IRON AND STEEL. BEND TEST ON STEEL.) |
| NF A03-158 | 鋼鐵產品.厚度等于或大于0.5mm和小于0.3mm的鋼板與鋼帶的單向彎曲試驗 | (IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).) |
| NF A03-172 | 鋼鐵產品.鋼的硬度換算值 | (Iron and steel. Conversion values of steel hardness.) |
| NF A03-355 | 鋼鐵產品.蠕變試驗 | (Steel products. Creep test.) |
| NF A03-400 | 鋼鐵產品.疲勞試驗.一般原則.` | (Iron and steel. General principles of the fatigue test.) |
| NF A03-401 | 鋼鐵產品.軸向載荷疲勞試驗 | (Iron and steel. Fatigue test by axial loading.) |
| NF A03-402 | 鋼鐵產品.回轉彎曲疲勞試驗 | (Iron and steel. Fatigue test by rotary flexion.) |
| NF A03-509 | 鋼鐵產品.疲勞試驗機的校準 | (Iron and steel. Calibration of fatigue test machines.) |
| NF A03-657 | 鋼鐵產品.擠壓試驗時,鋼冷變形性能的檢驗 | (Iron and steel products. Steel cold ductility determination. Compression test.) |
| NF A03-658 | 鋼鐵.鋼薄板和板材塑性應變比值γ的測定方法 | (Iron and steel - Methode of determination of the plastic strain ration r of steel sheet and plate.) |
| NF A03-659 | 鋼鐵.鋼薄板和板材拉伸應力硬化指數n的測定方法 | (Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.) |
| NF A03-702 | 鋼鐵產品.線材試驗.鐵絲和鋼絲的錫涂層試驗 | (IRON AND STEEL PRODUCTS. TESTING OF TIN COATINGS ON IRON AND STEEL THREAD.) |
| NF A03-707 | 鋼鐵產品.線材試驗.線材的簡單扭轉試驗 | (SIMPLE TORSION TESTING OF STEEL WIRES.) |
| NF A04-105 | 鋼鐵產品.鍛鋼中非金屬雜質含量的測定方法. 第1部分:宏觀法 | (Iron and steel. Methods of determination of the non metallic inclusion content of wrought steels. Part 1 : macroscopic methods.) |
| NF A04-106 | 鋼鐵產品.鍛鋼中非金屬雜質含量的測定方法.第2部分:標準圖象顯微照像法 | (Iron and steel. Methods of determination of content of non metallic inclusions in wrought steel. Part II : micrographic method using standards diagrams.) |
| NF A04-107 | 鋼鐵產品.測定非合金鋼線材中非金屬雜質含量的顯微照相方法 | (IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.) |
| NF A04-110 | 鋼鐵產品.一般用于三次擠壓或拉伸的非合金鋼線材.表面檢查 | (Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.) |
| NF A04-111 | 鋼鐵產品.高碳鋼線材脫碳深度的顯微照相法測定 | (IRON AND STEEL. MICROGRAPHIC DETERMINATION OF THE EXTENT OF DECARBURISATION OF NON ALLOY HIGH CARBON STEEL WIRE ROD.) |
| NF A04-112 | 鋼鐵產品.沸騰鋼線材化學雜質成分的描述及使其顯示的顯微照相法 | (IRON AND STEEL. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY OF EFFERVESCENT STEEL WIRE ROD.) |
| NF A04-113 | 鋼鐵產品.由鋼錠加工的高碳鋼線材.化學雜質成分的描述及使其顯示的的宏觀檢查法 | (Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.) |
| NF A04-114 | 鋼鐵產品.由連續澆注產品加工的高碳連續鑄錠鋼線材的描述及使其顯示的客觀檢查法化學雜質成分法 | (IRON AND STEEL. HIGH CARBON CONTINUOUS CAST STEEL WIRE ROD. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY.) |
| NF A04-201 | 鋼鐵產品.用非合金結構鋼和特殊結構鋼熱處理.脫碳深度的測定 | (Steel products. Special purpose unalloy and alloy structural steels for heat traitement. Determination of depth of decarburization.) |
| NF A04-203 | 鋼鐵產品.表面加熱淬火常規深度的測定 | (Steel products. Determination of the effective depth of hardening after flame or induction hardening.) |
| NF A04-204 | 鋼鐵產品.表面淬火薄層的整個厚度或常規厚度的測定 | (Steel products. Determination of the total or conventional thickness of surface hardened thin layers.) |
| NF A04-302 | 鋼鐵產品.用斷裂法對奧氏體晶粒放大傾向和對工具鋼淬火深度的測定(謝佛特氏試驗) | (Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).) |
| NF A04-303 | 鋼鐵產品.物理試驗.Jominy(叁密氏)淬火試驗 | (IRON AND STEEL. PHYSICAL TESTS. JOMINY HARDENABILITY TEST.) |
| NF A04-305 | 鋼鐵產品.厚度大于或等于６mm的鋼板的超聲反射檢驗.質量的定義.試驗方法 | (IRON AND STEEL. ULTRASONIC REFLECTION TESTING OF SHEET WITH THICKNESS NOT LESS THAN 6 MM. DEFINITION OF QUALITY. TEST METHODS.) |
| NF A04-306 | 鋼鐵.帶平行法蘭和IPE梁的H梁的超聲檢驗 | (Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.) |
| NF A04-312 | 無損檢驗.對厚度等于或大于6mm的奧氏體和奧氏體鐵素體不銹鋼扁鋼產品的超聲波檢驗(反射法) | (Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).) |
| NF A04-315-3 | 鋼材鍛造的非損試驗.第3部分:鐵素體鋼和馬氏體鋼鍛造的超聲波試驗 | (Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.) |
| NF A04-315-4 | 鋼鍛件的無損檢驗.第4部分:奧氏體和奧氏體鐵素體不銹鋼鍛件的超聲波檢驗 | (Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.) |
| NF A05-151 | 鋼鐵產品.用硫印法進行宏觀照相檢查(鮑法) | (Steel products. Macrographic examination by sulfur print (Baumann method).) |
| NF A05-152 | 鋼鐵產品.用強無機酸進行宏觀檢查 | (Steel products. Macroscopic examination by etching with strong mineral acids.) |
| NF A05-153 | 鋼鐵產品.用銅鹽侵蝕法進行宏觀檢查 | (Iron and steel. Macroscopic examination by means of copper salt etching.) |
| NF A05-154 | 鋼鐵產品.金屬覆膜技術.(光學檢驗) | (Steel products. Metallographic replica techniques. (optical examination).) |
| NF A05-159 | 不銹鋼耐晶間腐蝕的測定.第2部分:鐵素體、奧氏體和鐵素體奧氏體(二重)不銹鋼.含有硫酸的介質中的腐蝕試驗 | (Determination of resistance to intergranular corrosion of stainless steels. Part 2 : ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid.) |
| NF A05-160 | 不銹鋼耐晶間腐蝕的測定.第1部分:奧氏體和鐵素體奧氏體(二重)不銹鋼.測定不銹鋼在硝酸介質中質量損失的腐蝕 | (Determination of resistance to intergranular corrosion of stainless steels. Part 1 : austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).) |
| NF A05-305 | 奧氏體不銹鋼和鎳鉻鐵奧氏體合金.在四連多硫酸鈉中約束晶間腐蝕試驗 | (AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.) |
| NF A06-373 | 冶金材料的化學分析.鋼材中含氮量的測定.分光光度法 | (Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.) |
| NF A06-390 | 鋼鐵.磷含量的測定.磷釩鉬酸鹽分光光度法 | (Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method.) |
| NF A06-391 | 鋼鐵.含碳總量的測定.感應爐燃燒紅外線吸收法 | (Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace.) |
| NF A06-392-2 | 黑色金屬的化學分析.鋼鐵中的氧含量測定.第2部分:在惰性氣體中融化后的紅外法 | (Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.) |
| NF A08-328 | 黑色金屬材料的化學分析.鋼鐵中鉻的測定.火焰原子吸收光譜測定法 | (Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.) |
| NF A35-021 | 混凝土用鋼材.用于增強鋼制備的可焊接金屬線 | (STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.) |
| NF A35-024 | 混凝土鋼材.由直徑小于5mm的金屬線構成的織物 | (Steels for concrete. Fabric composed of wires with a diameter lower than 5 mm.) |
| NF A35-052 | 鋼鐵產品.帶改進粘附性的焊接鋼絲網和鋼絲用非合金鋼線材 | (Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
| NF A35-053 | 鋼鐵產品.熱成型或低溫成型制造產品用非合金鋼線材.型號 | (Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.) |
| NF A35-055 | 鋼鐵產品.涂藥焊條用非合金鋼線材.等級和型號 | (Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.) |
| NF A35-056 | 鋼鐵產品.氣體保護電弧焊和潛弧焊的焊條用合金鋼和非合金鋼線材.等級和型號 | (Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
| NF A35-057 | 鋼鐵產品.冷成形高強度機械彈簧鋼絲制造用非合金鋼線材.型號 | (IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.) |
| NF A35-564-5 | 冷鐓和冷擠壓的鋼桿材、棒材和線材.第5部分:不銹鋼的交貨技術條件 | (Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.) |
| NF A35-565 | 鋼鐵.軸承鋼.類型 | (IRON AND STEEL. BEARING STEELS. TYPES.) |
| NF A35-566 | 鋼鐵產品.鏈條鋼.等級和型號 | (Iron and steel products. Chain steels. Grades and types.) |
| NF A35-572 | 不銹鋼.第1部分:不銹鋼目錄 | (STAINLESS STEELS. PART 1 : LIST OF STAINLESS STEELS. (EUROPEAN STANDARD EN 10088-1).) |
| NF A35-574 | 不銹鋼.第3部分:一般用途的半成品,鋼棒,軋制線材和型鋼的交貨技術條件 | (Stainless steels. Part 3 : technical delivery conditions for semi-finished products, bars, rods, and sections for general purposes.) |
| NF A35-579 | 內燃機合金和鋼材 | (Valve steels and alloys for internal combustion engines.) |
| NF A35-587 | 彈簧用不銹鋼帶材.交貨技術條件 | (Stainless steel strip for springs - Technical delivery conditions.) |
| NF A35-590 | 鋼鐵產品.工具鋼 | (IRON AND STEEL. TOOL STEELS.) |
| NF A36-225 | 壓力容器用不銹鋼棒 | (Stainless steel bars for pressure purposes.) |
| NF A36-331 | 鋼鐵產品.不銹鋼.連續鍍鉛的帶材和板材 | (IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.) |
| NF A36-331 | 鋼鐵產品.不銹鋼.連續鍍鉛的帶材和板材 | (IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.) |
| NF A36-607 | 鍋爐和壓力容器用自由鍛造或模鍛法制奧氏體不銹鋼零件.質量等級和類型 | (AUSTENITIC STAINLESS STEEL PARTS OBTAINED BY FLAT DIE FORGING OR DROP FORGING FOR BOILERS AND PRESSURE VESSELS. GRADE AND TYPES.) |
| NF A36-613 | 一般用鍛件.不銹鋼 | (GENERAL PURPOSE FORGINGS. STAINLESS STEELS.) |
| NF A36-711 | 無包裝鋼.用于接觸人和動物消耗的食品、產品和飲料的不銹鋼 | (Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products and beverages for human and animal consumption.) |
| NF A37-604-4 | 鋼絲和鋼絲產品.繩索用鋼絲.第4部分:不銹鋼鋼絲 | (Steel wire and wire products - Steel wire for ropes - Part 4 : stainless steel wire.) |
| NF A37-611-3 | 機械彈簧用鋼絲.第3部分:不銹鋼彈簧鋼絲 | (Steel wire for mechanical springs - Part 3 : stainless spring steel wire.) |
| NF A45-006 | 鋼鐵.熱軋六角型鋼材.尺寸 | (Iron and steel. Hot rolled hexagon steel. Dimensions.) |
| NF A45-006 | 鋼鐵.熱軋六角型鋼材.尺寸 | (Iron and steel. Hot rolled hexagon steel. Dimensions.) |
| NF A45-110 | 冶金產品.不銹鋼和耐熱鋼線材和棒材.軋制公差 | (Iron and steel. Stainless and heat resisting steel for bars and wires. Rolling tolerances.) |
| NF A46-110-1 | 冷軋不銹鋼窄帶材和切削長度.尺寸與形狀公差 | (Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape.) |
| NF A46-110-2 | 冷軋不銹鋼寬帶材和板材/薄板.尺寸和形狀公差(歐洲標準EN 10259) | (Cold-rolled stainless steel wide strip and plate/sheet. Tolerances on dimensions and shape.) |
| NF A47-301 | 鋼鐵產品.彈簧用非鉛浴淬火合金硬質鋼制三股圓鋼絲 | (IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.) |
| NF A47-301 | 鋼鐵產品.彈簧用非鉛浴淬火合金硬質鋼制三股圓鋼絲 | (IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.) |
| NF A47-402 | 鋼鐵制品.低溫成型不銹鋼長制品的尺度,公差和表面質量 | (IRON AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE QUALITY.) |
| NF A47-402 | 鋼鐵制品.低溫成型不銹鋼長制品的尺度,公差和表面質量 | (IRON AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE QUALITY.) |
| NF A49-117 | 鋼管.管道和其他用途光端無縫鋼管.鐵素體和奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-147 | 鋼管.一般用和管道用光端縱向焊接鋼管.奧氏體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-148 | 鋼管.一般用和管道用光端縱向焊接鋼管.鐵素體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-151 | 包括飲用水在內的含水液體輸送用焊接不銹鋼管.交貨技術件 | (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-217 | 鋼管.熱交換器用無縫管.奧氏體不銹鋼和鐵素體鋼.（尺寸.交貨技術條件.） | (Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.) |
| NF A49-218 | 鋼管.奧氏體不銹鋼熔爐用無縫鋼管.（帶標準公差或縮減公差的尺寸.交貨技術條件.） | (STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-244 | 鋼管.壓力設備用焊接奧氏體不銹鋼和奧氏鐵素體軋制鋼管的尺寸和技術交貨條件 | (STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.) |
| NF A49-247 | 鋼管.熱交換器用縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-249 | 鋼管.食品工業用光端縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-289 | 鋼管.用于高低溫條件下的對縫焊接管狀配件.非合金、合金和不銹鋼.尺寸.技術交貨條件 | (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-317 | 鋼管.機械用光端無縫鋼管.奧式體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-647 | 鋼管.不銹鋼、鐵素體和奧氏體鋼制圓形、正方形、矩形或橢圓形建筑用焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.) |
| NF A49-950 | 不銹鋼管.尺寸、公差和單位長度的規范質量 | (Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length.) |
| NF A50-421 | 鍛鋁和鋁合金鋼材,帶材和板材.第2部分:機械性能 | (Aluminium and aluminium alloys. Sheet, strip and plate. Part 2 : mechanical properties.) |
| NF A72-120 | 鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A81-318 | 有不銹鋼和/或耐熱鋼的出的粉末焊劑，電弧焊用實心金屬裸焊絲.符號.規范 | (SOLID BARE ELECTRODE WIRES FOR SUBMERGED ARC WELDING,DEPOSITING A STAINLESS AND/OR HEAT-RESISTING STEEL. SYMBOLIZATION. SPECIFICATIONS.) |
| NF A81-324 | 實心金屬裸雙焊條.有不銹鋼和/或耐熱鋼析出的電弧焊用粉末焊劑.符號.規范.試驗 | (COMBINATIONS OF BARE SOLID-METAL ELECTRODE WIRES AND POWER FLUXES FOR ELECTRIC ARC WELDING,DEPOSITING A STAINLESS AND/OR REFRACTORY STEEL. SYMBOLIZATION. REQUIREMENTS. TEST.) |
| NF A89-101-3 | 焊接.金屬材料焊接的推薦方法.第3部分:不銹鋼的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.) |
| NF A89-207 | 焊接.在奧氏體和雙重鐵素體奧氏體鉻鎳不銹鋼焊接金屬中鐵素體數目的測定 | (Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.) |
| NF C28-495 | 繼電器用磁性材料(鋼鐵) | (Magnetic materials (iron and steel) for use in relays.) |
| NF D29-011-2 | 與食品料有關的材料和物質.餐具和凹型餐具.第2部分:不銹鋼和鍍銀餐具的要求 | (MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFF. CUTLERY AND TABLE HOLLOWAR. PART 2 : REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY. (EUROPEAN STANDARD EN ISO 8442-2).) |
| NF D36-406 | 建筑物用閥.建筑物內飲用水給水用手動銅合金和不銹鋼球閥.試驗和要求 | (Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements.) |
| NF E25-035 | 緊固件.不銹鋼螺紋連接件.試驗方法.使用合格證 | (FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.) |
| NF E25-042 | 耐腐蝕不銹鋼緊固件的鈍化 | (Passivation of corrosion-resistant stainless-steel fasteners.) |
| NF E25-100-5 | 碳鋼和不銹鋼制緊固件的機械性能.第5部分:不處在拉伸應力下的固定螺釘和類似螺紋緊固件 | (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.) |
| NF E25-100-6 | 不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-8 | 不銹鋼緊固件耐腐蝕的機械特性.不低于拉伸應力下配套螺釘和類似緊固件 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.) |
| NF E25-119-2 | 十字槽沉頭螺釘(一般頭形).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬 | (Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.) |
| NF E25-400-6 | 不銹鋼耐腐蝕機械特性.螺母 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 2 : nuts.) |
| NF E25-651 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.) |
| NF E25-755 | 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘 | (Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.) |
| NF E25-756 | 金屬不銹鋼和硬化鋼的平行螺釘 | (Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).) |
| NF E25-757 | 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘 | (Parallel pins with internal thread, of hardened steel and martensitic stainless steel.) |
| NF E26-020 | 未校準未試驗過的焊接圓鋼環鏈 | (Welded link chain round steel non calibrated non tested.) |
| NF E29-251 | 工業管道.不銹鋼制焊接沖壓凸緣（薄型系列）.公稱壓力１０ | (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10) |
| NF E29-736-2 | 可運輸?shù)臍馄?可再充氣的焊接鋼氣瓶.設計和制造.第2部分:不銹鋼 | (Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2 : stainless steel.) |
| NF E29-833 | 管道.雙咬邊金屬軟管.(石棉墊片，密封，圓截面，奧氏體不銹鋼制) | (PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.) |
| NF E32-116 | 不銹鋼外殼的鍋爐 | (Stainless steel shell boilers.) |
| NF F80-101 | 鐵路車輛.F ８０鋼鐵產品和半成品制造鐵路車輛推薦使用的鋼材.I·一般規定 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.) |
| NF F80-101 | 鐵路車輛.F ８０鋼鐵產品和半成品制造鐵路車輛推薦使用的鋼材.I·一般規定 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.) |
| NF F80-102 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.II.一般用結構鋼 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. II. STRUCTURAL STEELS FOR GENERAL PURPOSES.) |
| NF F80-103 | 鐵路車輛.鐵路車輛制造推薦使用的鋼材.Ⅲ.抗大氣腐蝕的結構鋼材 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. III. STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE. COPPER STEELS.) |
| NF F80-104 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.IV. 制造高張力機具和壓縮氣貯器的碳鋼和錳碳鋼 | (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. IV : STEELS FOR PLATES FOR PRESSURE VESSELS AND HIGHLY STRESSED PARTS.) |
| NF F80-105 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.V.適于熱處理的鍛制非合金鋼 | (Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.) |
| NF F80-106 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.VI. 冷加工鋼材 | (Rolling stock. Recommended steels for rolling stock construction. VI cold forming steels.) |
| NF F80-107 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.VII.熱處理非合金鋼和特種合金鋼 | (Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.) |
| NF F80-108 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.VIII. 彈簧鋼 | (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII : SPRING STEELS.) |
| NF F80-109 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.IY. 一般不銹鋼 | (Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.) |
| NF F80-109 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.IY. 一般不銹鋼 | (Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.) |
| NF J33-372 | 游艇.不銹鋼纜用拉緊裝置和活動纜的固定接頭.尺寸 | (Small craft. Rigging screws for stainless steel wire rope. Principal dimensions for forks, connection pins and eye-holes.) |
| NF J37-310 | 造船工業.錨鏈.普通錨鏈環圓鋼口徑 | (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR COMMON LINKS.) |
| NF J37-311 | 造船工業.錨鏈.大鏈環和末端環圓鋼口徑 | (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR ENLARGED AND END LINKS.) |
| NF L12-005 | 航空航天系列.熱軋圓鋼棒.標稱公差.直徑D≤6mm 至 D≤250mm.尺寸 | (Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm inferior or equal to D inferior or equal to 250 mm - Dimensions.) |
| NF L12-610 | 耐熱鋼和鋼合金半成品冷拉無縫圓鋼管.航空和航天工業選用 | (SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.) |
| NF L16-004 | 航空航天系列.涂料和清漆.不銹鋼試件表面的性質和準備方法 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN CORROSION RESISTING STEEL.) |
| NF L21-106 | 鉚釘用鋁合金、鋼、耐熱不銹鋼合金線材.尺寸 | (Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.) |
| NF L21-203 | 鋼鉚釘.不銹鋼和耐熱合金鉚釘.技術規范 | (STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.) |
| NF L22-517 | E-26 NCT 25 不銹鋼制內緊鎖十二角頭螺母.ISO螺紋 | (12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.) |
| NF L22-526 | E-２６NCT２５不銹鋼內鎖緊十二角頭螺毋.MJ 螺紋 | (12 POINT SELF-LOCKING FLANGE NUTS IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. MJ THREAD.) |
| NF L22-531 | E-２６NCT２５不銹鋼制內鎖緊嵌入螺母.ISO螺紋 | (SELF-LOCKING CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. ISO THREAD.) |
| NF L22-588 | 航空用螺栓和螺母.鍍銀不銹鋼制深槽單耳內鎖緊系留螺母.ISO M或ISO MJ螺紋.分類:1100 MPa/425度(室溫下) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L31-209 | 機身用軸承.不銹鋼制彎管用單排滾珠剛性軸承.尺寸和負荷 | (AIRFRAME BEARINGS,SINGLE ROW. RIGID TORQUE TUBE BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.) |
| NF L31-215 | 機身用軸承.不銹鋼制單排滾珠剛性軸承.尺寸和負荷 | (AIRFRAME BEARINGS,SINGLE ROW. RIGID BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.) |
| NF L31-223 | 機身用軸承.不銹鋼制雙排球面軸承.尺寸和負荷 | (AIRFRAME BEARINGS,DOUBLE ROW. SELF ALIGNING BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.) |
| NF L31-227 | 機身用軸承.不銹鋼制單排球面滾珠軸承.尺寸和負荷 | (AIRFRAME BEARINGS,SINGLE ROW. SELF ALIGNING ROLLER BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.) |
| NF L43-611 | 不銹鋼制釬接帶法蘭的直接頭 | (FLANGED STRAIGHT UNIONS,SOLDER TYPE,STAINLESS STEEL.) |
| NF M81-636 | 煤礦器材.經鏈板輸送機用高抗拉強度圓鋼絲鏈環的校準鏈.規范.驗收條件 | (Mining equipment. High tensile steel chains round link for chain conveyors and coal plough. Specifications. Acceptance testing.) |
| NF M81-637 | 煤礦器材.經通用連接鏈環用圓鋼絲校準鏈 | (MINING EQUIPMENT. ROUND LINK TYPE CHAIN UNIVERSEL CONNECTORS FOR CALIBRATED CHAINS. SPECIFICATIONS. ACCEPTANCE TESTING.) |
| NF M81-801 | 提升用圓鋼絲纜.術語和定義 | (CIRCULAR METAL WIRE ROPES FOR HOISTING. VOCABULARY.) |
| NF M81-808 | 采礦設備.提升用圓鋼絲纜.三角式6股線芯型 | (MINING EQUIPMENT. CIRCULAR WIRE ROPES FOR HOISTING. 6 TRIANGULAR STRAND TYPES ON CENTRAL TEXTILE CORE.) |
| NF P16-326-1 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第1部分:要求、試驗和質量控制 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P16-326-2 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統S.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.) |
| NF P16-326-3 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統X.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.) |
| NF P34-303 | 金屬薄板制屋面制品.不銹鋼薄板制成的全支撐屋面制品的規范 | (Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet.) |
| NF P34-309-1 | 金屬片屋頂產品.鋼鋁或不銹鋼片的自支持產品規范.第1部分:鋼 | (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1 : steel.) |
| NF P34-309-2 | 金屬片屋頂產品.鋼鋁或不銹鋼片的自支持產品規范.第2部分:鋁 | (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium.) |
| NF P34-309-3 | 金屬片屋頂產品.鋼鋁或不銹鋼片的自支持產品規范.第3部分:不銹鋼 | (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel.) |
| NF S90-361 | 外科醫療器械.釘子.股骨最高端用的不銹鋼片 | (MEDICO-SURGICAL EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS AND DIMENSIONS.) |
| NF S90-414 | 外科醫療器械.外科植入物.不對稱螺紋和球形底座接骨用不銹鋼螺絲.機械性能和試驗 | (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.) |
| NF S90-426 | 外科醫療器械.外科植入物.不銹鋼粗糙面骨干板.尺寸和表面特性 | (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.) |
| NF S90-427 | 外科醫療器械.脊椎用接骨器材.不銹鋼制或鈷基合金制脊椎板.A系統.尺寸與幾何形狀 | (MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.) |
| NF S90-450 | 外科器械.止血鉗.不銹鋼.化學成分和硬度 | (Surgical instruments. Haemostatic forceps. Stainless steel. Chemical composition and hardness.) |
| NF S93-004 | 醫療器件制造用不銹鋼針頭管材 | (STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE O FMEDICAL DEVICES. (EUROPEAN STANDARD EN ISO 9626).) |
| NF S93-004/A1 | 醫療裝置生產用不銹鋼針管 | (Stainless steel needle tubing for the manufacture of medical devices.) |
| NF S94-051 | 外科植入物.金屬材料.鍛造不銹鋼 | (Implants for surgery - Metallic materials - Wrought stainless steel.) |
| NF S94-059 | 外科植入物.金屬材料.可鍛高氮不銹鋼 | (Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.) |
| NF S94-090 | 醫療外科設備.骨外科輔助定位裝置用材料.馬氏體不銹鋼、彌散硬化不銹鋼、奧氏體不銹鋼和奧氏鐵素體不銹鋼 | (Medico-surgical equipment - Materials for ancillary positioning instruments for bone surgery - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels.) |
| NF S94-471 | 外科設備.金屬材料.第1部分:不銹鋼 | (Surgical instruments - Metallic materials - Part 1 : stainless steel.) |
| NF T35-505-4 | 涂料和相關產品應用前鋼鐵襯底的準備.金屬噴砂清理磨損的規范.第4部分:低碳鑄鋼的噴射(EN ISO 11124-4) | (Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot.) |
| NF X08-104 | 顏色.鋼鐵工廠.管道系統的標記 | (Colours. Iron and stellfactories. Marking of fluids in pipes.) |
| NF X11-510 | 篩和篩分.工業用退火圓鋼絲制方孔金屬篩.鋼絲直徑 | (SIEVES AND SIEVING. WIRE GAUZE WITH SQUARE APERTURES MADE FROM ANNEALED ROUND WIRE FOR INDUSTRIAL USE. WIRE DIAMETERS.) |
| 編號 | 中文名稱 | 英文名稱 |