微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 1035-1 | 熱軋鋼棒材 第1部分:圓鋼尺寸 | Hot-rolled steel bars; Part 1 : Dimensions of round bars |
| ISO 10792-1 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第1部分:米制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
| ISO 10792-2 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
| ISO 10792-3 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第3部分:技術規范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
| ISO 11124-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分:一般介紹及分類 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11124-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分:冷硬鑄鐵丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit |
| ISO 11124-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分:高碳鑄鋼丸和砂 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit |
| ISO 11124-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分:低碳鑄鋼丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot |
| ISO 11125-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11125-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11125-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第3部分:硬度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness |
| ISO 11125-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第4部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density |
| ISO 11125-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第5部分:缺陷顆粒的百分比和微結構的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure |
| ISO 11125-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第6部分:外來雜質測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter |
| ISO 11125-7 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第7部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture |
| ISO 11126-1 Technical Corrigendum 1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1 |
| ISO 11126-1 Technical Corrigendum 2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤2 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2 |
| ISO 11126-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11126-10 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第10部分:鐵鉛石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne |
| ISO 11126-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第3部分:銅精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag |
| ISO 11126-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第4部分:煤爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag |
| ISO 11126-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第5部分:鎳精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag |
| ISO 11126-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第6部分:煉鐵爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag |
| ISO 11126-7 Technical Corrigendum 1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| ISO 11126-7 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide |
| ISO 11126-8 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第8部分:橄欖石砂 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand |
| ISO 11126-9 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite |
| ISO 11127-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11127-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11127-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第3部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density |
| ISO 11127-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第4部分:通過玻璃載片試驗評定硬度 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test |
| ISO 11127-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第5部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture |
| ISO 11127-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第6部分:通過測量電導率測定水溶性雜質 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement |
| ISO 11127-7 | 涂裝油漆和有關產品前鋼材預處理 非金屬噴沙清理磨料的試驗方法 第7部分:水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides |
| ISO 1127 | 不銹鋼管 尺寸、公差和單位長度的公稱質量 | Stainless steel tubes; dimensions, tolerances and conventional masses per unit length |
| ISO 11408 | 化學轉化膜 鋼鐵上的黑色氧化膜 規范和試驗方法 | Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods |
| ISO 12858-1 | 光學和光學儀器 大地測量儀器輔助裝置 第1部分:殷鋼水平支柱 | Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs |
| ISO 13520 | 奧氏體不銹鋼鑄件中鐵素體含量的測定 | Determination of ferrite content in austenitic stainless steel castings |
| ISO 14343 AMD 1 | 電焊消耗品.不銹鋼和耐熱鋼電弧焊用焊絲電極、焊絲和焊條.分類.修改件1:埋弧焊和電渣焊用條狀電極的補充 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification; Amendment 1: Addition of strip electrodes for submerged arc welding and electroslag welding |
| ISO 14343 | 電焊消耗品.不銹鋼和耐熱鋼電弧焊用焊絲電極、焊絲和焊條.分類 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification |
| ISO 1461 | 鋼鐵制件的熱浸鋅層 規范和試驗方法 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods |
| ISO 15730 | 金屬和其他無機覆蓋層 拋光作為精加工和鈍化不銹鋼的方法 | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| ISO 15787 | 技術產品文獻 熱處理鋼鐵部件 表述和表示 | Technical product documentation - Heat-treated ferrous parts - Presentation and indications |
| ISO 16048 | 耐腐蝕不銹鋼緊固件的鈍化 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 16143-1 | 通用不銹鋼.第1部分:扁平制品 | Stainless steels for general purposes - Part 1: Flat products |
| ISO 16143-2 | 通用不銹鋼.第2部分:半成品棒材、桿材和型材 | Stainless steels for general purposes - Part 2: Semi-finished products, bars, rods and sections |
| ISO 16143-3 | 通用不銹鋼.第3部分:鋼絲 | Stainless steels for general purposes - Part 3: Wire |
| ISO 17053 | 鋼鐵.氧的測定.在惰性氣體中熔化后的紅外法 | Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas |
| ISO 17058 | 鋼鐵.砷含量的測定.分光光度法 | Steel and iron - Determination of arsenic content - Spectrophotometric method |
| ISO 17633 | 焊接消耗品.不銹鋼和耐熱鋼的氣體保護和非氣體保護金屬弧焊用藥芯電極和焊條.分類 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification |
| ISO 18286 | 熱軋不銹鋼板.尺寸和形狀公差 | Hot-rolled stainless steel plates - Tolerances on dimensions and shape |
| ISO 2037 | 食品工業用不銹鋼管 | Stainless steel tubes for the industry |
| ISO 2081 | 金屬覆蓋層 鋼鐵上鋅電鍍層 | Metallic coatings; Electroplated coatings of zinc on iron or steel |
| ISO 2082 | 金屬覆蓋層 鋼鐵上鎘電鍍層 | Metallic coatings; Electroplated coatings of cadmium on iron or steel |
| ISO 2338 | 不淬硬鋼和奧氏體不銹鋼 圓錐銷 | Parallel pins, of unhardened steel and austenitic stainless steel |
| ISO 2851 | 食品工業用不銹鋼彎頭和三通 | Stainless steel bends and tees for the food industry |
| ISO 2852 | 食品工業用不銹鋼套管 | Stainless steel clamp pipe couplings for the food industry |
| ISO 2853 | 食品工業用不銹鋼螺紋接管器 | Stainless steel threaded couplings for the food industry |
| ISO 3506-1 | 耐腐蝕不銹鋼緊固件的機械性能 第1部分:螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs |
| ISO 3506-2 | 耐腐蝕不銹鋼緊固件的機械性能 第2部分:螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts |
| ISO 3506-3 | 耐腐蝕不銹鋼緊固件的機械性能 第3部分:緊定螺釘及類似的不受拉應力的螺紋緊固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 3506-4 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws |
| ISO 3581 | 焊料.不銹鋼和耐熱鋼的手工金屬電弧焊接用涂劑焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification |
| ISO 3651-1 | 不銹鋼耐晶間腐蝕的測定 第1部分:奧氏體和鐵素體奧氏體(二重)不銹鋼 用失重測定法在硝酸介質中的腐蝕試驗(H | Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 3651-2 | 不銹鋼耐晶間腐蝕的測定 第2部分:鐵素體、奧氏體和鐵素體奧氏體(二重)不銹鋼 在含硫酸介質中的腐蝕試驗 | Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid |
| ISO 3763 | 鋼材 評定非金屬夾雜物含量的宏觀方法 | Wrought steels; Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 3823-1 | 牙科旋轉器械 牙鉆 第1部分:不銹鋼牙鉆和硬質合金牙鉆 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs |
| ISO 4144 | 管道系統.符合ISO 7/1螺紋標準的不銹鋼配件 | Pipework - Stainless steel fittings threaded in accordance with ISO 7-1 |
| ISO 4950-1 AMD 1 | 高屈服強度扁鋼材.第1部分:一般要求.修改件1 | High yield strength flat steel products - Part 1: General requirements; Amendment 1 |
| ISO 4950-1 | 高屈服強度扁鋼材.第1部分:一般要求 | High yield strength flat steel products - Part 1: General requirements |
| ISO 4950-2 AMD 1 | 高屈服強度扁鋼材.第2部分:按正火或控制軋制條件提供的鋼材.修改件1 | High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition; Amendment 1 |
| ISO 4950-2 | 高屈服強度扁鋼材.第2部分:按正火或受控軋制條件提供的鋼材 | High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition |
| ISO 4950-3 AMD 1 | 高屈服強度扁鋼材.第3部分:按熱處理(淬火+回火)條件提供的鋼材.修改件1 | High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition; Amendment 1 |
| ISO 4950-3 | 高屈服強度扁鋼材.第3部分:按熱處理(淬火+回火)條件提供的鋼材 | High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition |
| ISO 5251 | 不銹鋼對焊配件 | Stainless steel butt-welding fittings |
| ISO 5832-1 | 外科植入物 金屬材料 第1部分:鍛造不銹鋼 | Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| ISO 5832-9 | 外科植入物.金屬材料.第9部分:鍛造高氮不銹鋼 | Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel |
| ISO 6931-1 | 彈簧不銹鋼 第1部分:鋼絲 | Stainless steels for springs - Part 1: Wire |
| ISO 6931-2 | 彈簧不銹鋼.第2部分:窄形帶材 | Stainless steels for springs - Part 2: Narrow strip |
| ISO 7046-2 | 十字槽沉頭(通用頭型)螺釘 產品等級A級 第2部分:性能等級鋼8.8級、不銹鋼和有色金屬 | Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals |
| ISO 7153-1 AMD 1 | 外科器械 金屬材料 第1部分:不銹鋼 修改1 | Surgical instruments - Metallic materials - Part 1: Stainless steel; Amendment A1 |
| ISO 7153-1 | 外科器械 金屬材料 第1部分:不銹鋼 | Surgical instruments; metallic materials; part 1: stainless steel |
| ISO 7598 | 適于按照ISO 7/1車螺紋用不銹鋼管 | Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 8074 | 航空航天 奧氏體不銹鋼零件的表面處理 | Aerospace; Surface treatment of austenitic stainless steel parts |
| ISO 8075 | 航空航天 可淬硬的不銹鋼零件表面處理 | Aerospace; Surface treatment of hardenable stainless steel parts |
| ISO 8249 | 焊接 奧氏體和成雙鐵素體奧氏體鎳-鉻(Cr-Ni)不銹鋼焊接金屬中鐵素體數(FN)的測定 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| ISO 8442-2 | 與食品料有關的材料和物質.餐具和凹型餐具.第2部分:不銹鋼和鍍銀餐具的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery |
| ISO 8501-2 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3 | 涂裝油漆和有關產品前鋼材的預處理.表面清潔度的目視評定.第3部分:焊接、切邊及其它表面缺陷區域的處理等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 8502-11 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽濁度測定的現場方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
| ISO 8502-2 | 涂覆油漆和相關產品前鋼材襯底的預處理.表面清潔度的評定試驗.第2部分:潔凈表面氯化物的測定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分:油漆前預處理后的鋼材表面上的灰塵評定(壓 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分:油覆前凝露可能性的評定導則 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法) | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6 | 油漆和相關產品用前鋼材的預處理.表面清潔度的評定試驗.第6部分:提取分析用可溶性雜質.Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8 | 涂裝油漆和有關產品前鋼材的預處理 表面清潔度評定試驗 第8部分：現場水分折射測定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分:水溶性鹽的現場電導測定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分:磨料噴射清理表面粗糙度的ISO評定 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 8503-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分:磨料噴射清理表面的粗糙度定級方法 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure |
| ISO 8503-5 | 涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
| ISO 8504-1 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分:總則 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2 | 涂裝油漆和有關產品前鋼材預處理.表面預處理方法.第2部分:磨料噴射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分:手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 8733 | 不淬硬鋼或奧氏體不銹鋼內螺紋圓柱銷 | Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| ISO 8734 | 淬硬鋼和馬氏體不銹鋼(定位銷)圓柱銷 | Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) |
| ISO 8735 | 淬硬鋼和馬氏體不銹鋼內螺紋圓錐銷 | Parallel pins with internal thread, of hardened steel and martensitic stainless steel |
| ISO 9327-5 | 壓力用途的鋼鍛件和軋制或鍛造的棒材 交貨技術條件 第5部分:不銹鋼 | Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels |
| ISO 9328-7 | 壓力用途扁鋼產品.交貨技術條件.第7部分:不銹鋼 | Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels |
| ISO 9329-4 | 壓力用途的無縫鋼管 交貨技術條件 第4部分:奧氏體不銹鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels |
| ISO 9330-6 | 壓力用途的焊接鋼管 交貨技術條件 第6部分:奧氏體不銹鋼管的焊接長度 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes |
| ISO 9444 | 連續熱軋不銹鋼帶材、板材和切割長度.尺寸和形狀公差 | Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on dimensions and form |
| ISO 9445 | 連續冷軋不銹鋼窄帶材、寬帶材、板材和切割長度.尺寸和形狀公差 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form |
| ISO 9587 | 金屬和其他無機覆蓋層 鋼鐵為減少氫脆危險的預處理 | Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 9588 | 金屬和其他無機覆蓋層 鋼鐵為減少氫脆危險的的后涂覆處理 | Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 9626 AMD 1 | 供制造醫療器械用的不銹鋼針管 修改1 | Stainless steel needle tubing for the manufacture of medical devices; Amendment 1 |
| ISO 9626 | 供制造醫療器械用的不銹鋼針管 | Stainless steel needle tubing for manufacture of medical devices |
| ISO/TR 15235 | 涂裝油漆和有關產品前鋼材的預處理 收集的有關溶水鹽污染水平的影響的信息 | Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination |
| ISO/TR 17671-3 | 焊接.金屬材料焊接的推薦.第3部分:不銹鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels |
| ISO/TR 4558 | 小艇 不銹鋼絲繩用索具螺旋扣、叉頭、連接銷和眼孔的主要尺寸 | Small craft; Rigging screws for stainless steel wire rope; Principal dimensions for forks, connection pins and eye-holes |
| ISO/TS 15510 | 不銹鋼.化學成分 | Stainless steels - Chemical composition |
| 編號 | 中文名稱 | 英文名稱 |