微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 17014 Bb.2 | 鋼鐵的熱處理；技術術語的外語翻譯 | Heat treating of iron and steel; translations of technical terms into foreign languages |
| DIN 17022-2 | 鋼鐵材料熱處理.熱處理方法.第2部分:工具的淬火和回火 | Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools |
| DIN 17014-3 | 鋼鐵材料的熱處理.第3部分:熱處理工藝指示標記 | Heat treatment of ferrous materials; notation to indicate heat treatment processes |
| DIN 4000-23 | 第23部分:鋼鐵用物品特性表格設計 | Tabular layouts of article characteristics for iron and steel |
| DIN 17022-3 | 鋼鐵材料熱處理.熱處理方法.第3部分:表面硬化處理 | Heat treatment of ferrous materials; heat treatment methods; case hardening |
| DIN EN 10136 | 黑色金屬材料的化學分析.鋼鐵中鎳含量的測定.火焰原子吸收分光光度測定法 | Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989 |
| DIN EN 10188 | 黑色金屬材料的化學分析.鋼鐵中鉻的測定.火焰原子吸收光譜測定法 | Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989 |
| DIN EN 10052 | 鋼鐵產品熱處理術語詞匯 | Vocabulary of heat treatment terms for ferrous products; German version EN 10052:1993 |
| DIN EN 10211 | 鋼鐵材料化學分析.鋼和鐵中鈦含量測定.火焰原子吸收光譜測定法 | Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method; German version EN 10211:1995 |
| DIN EN ISO 1460 | 金屬鍍層.鋼鐵材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 (ISO 1460:1992); 德文版本 EN ISO 1460:1 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994 |
| DIN EN 10021 | 鋼鐵制品的一般交貨技術條件; 德文版本 EN 10021:1993 | General technical delivery requirements for steel and iron products; German version EN 10021:1993 |
| DIN 17022-1 | 鋼鐵材料熱處理.熱處理方法.第1部分:部件的硬化處理、奧氏回火、退火、淬火、回火 | Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components |
| DIN EN 10212 | 鋼鐵材料的化學分析.用分光光度法測定鋼鐵中砷的含量; 德文版本 EN 10212:1995 | Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method; German version EN 10212:1995 |
| DIN EN 10276-1 | 鐵素體材料的化學分析.鋼鐵中氧含量的測定.第1部分:氧測定用鋼樣品的取樣和制備 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000 |
| DIN 17022-4 | 鋼鐵材料熱處理.熱處理方法.第4部分:滲氮和硝基滲碳 | Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing |
| DIN EN 12330 | 金屬腐蝕防護 .鋼鐵上的鎘電鍍層 | Corrosion protection of metals - Electrodeposited coatings of cadmium iron or steel; German version EN 12330:2000 |
| DIN 6663 | 氣動管系統.塑料(PVC),鋼鐵,和不銹鋼氣動管系統部件的制造工藝 | Pneumatic tube systems - Workmanship of components for pneumatic tube systems in plastics (PVC-U), ferrous steel and stainless steel |
| DIN 17022-5 | 鋼鐵材料熱處理.熱處理方法.第5部分:表面淬火 | Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening |
| DIN 50965 | 電鍍層.鋼鐵和銅及銅合金錫鍍層 | Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys |
| DIN 50961 | 電鍍層.鋼鐵材料的鍍鋅層.術語、試驗和耐腐蝕 | Electroplated coatings - Zinc coatings on iron and steel - Terms, testing and corrosion resistance |
| DIN EN ISO 9556 | 鋼鐵.含碳總量的測定.感應電爐燃燒后的紅外線吸收法 (ISO 9556:1989); 德文版本 EN ISO 9556:2001 | Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001 |
| DIN EN ISO 3690 | 焊接及相關工藝.鋼鐵電弧焊接金屬中氫含量的測定 | Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000); German version EN ISO 3690:2000 |
| DIN 6773 | 鋼鐵材料熱處理.熱處理件.圖樣畫法及標注. | Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings |
| DIN EN 10304 | 繼電器磁性材料(鋼鐵) | Magnetic materials (iron and steel) for use in relays; German version EN 10304:2001 |
| DIN EN 10306 | 鋼鐵.帶平行法蘭和IPE梁的工字梁的超聲波試驗; 德文版本 EN 10306:2001 | Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams; German version EN 10306:2001 |
| DIN EN ISO 14284 | 鋼鐵.化合物樣品取樣和制備方法 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002 |
| DIN EN 10276-2 | 鋼鐵材料的化學分析.鋼鐵中氧含量的測定.第2部分:在惰性氣體中熔解后的紅外法 | Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003 |
| DIN EN 10328 | 鋼鐵.表面加熱后常規淬硬深度的測定 | Iron and steel - Determination of the conventional depth of hardening after surface heating; German version EN 10328:2005 |
| DIN EN 10184 | 黑色金屬材料的化學分析.非合金鋼鐵中磷測定.鉬蘭分光光度測量法 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method; German version EN 10184:2006 |
| DIN 1581 | 棒鋼材.鏈節帶用型鋼.尺寸.重量 | Steel Bars; Hinge Strip Profiles; Dimensions, Weights |
| DIN 17021-1 | 黑色金屬的熱處理.第1部分:材料選擇.根據淬硬性的鋼材選擇 | Heat Treatment of Ferrous Metals; Material Selection; Steel Selection according to Hardenability |
| DIN EN 10178 | 黑色金屬材料的化學分析.鋼材中鈮含量的測定.分光光度分析法 | Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989 |
| DIN 50959 | 電鍍層.鐵和鋼材料的電鍍層在不同氣候條件下的耐腐蝕能力 | Electrodeposited coatings; corrosive resistance of electrodeposited coatings on iron and steel under different climatic conditions |
| DIN 17115 | 焊接的圓形鋼鏈用鋼材.交付技術狀態 | Steels for welded round link chains; technical delivery conditions |
| DIN EN 27963 | 鋼材的焊接點.焊接點超聲波檢驗用的2號校準試樣塊 | Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985); german version EN 27963:1992 |
| DIN EN ISO 11126-8 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第8部分:橄欖石沙 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997 |
| DIN EN ISO 11127-2 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第2部分:粒度分布測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997 |
| DIN EN ISO 11127-3 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第3部分:表觀密度的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997 |
| DIN EN ISO 11127-4 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第4部分:通過玻璃劃痕試驗評定硬度 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997 |
| DIN EN ISO 11127-5 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第5部分:含水量測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997 |
| DIN EN ISO 11127-6 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第6部分:通過測量電導率測定水溶性雜質 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German version EN ISO 11127-6:1997 |
| DIN EN ISO 11127-7 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第7部分:水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997 |
| DIN EN ISO 11125-1 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第1部分:取樣 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997 |
| DIN EN ISO 11125-2 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第2部分:粒度分布測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997 |
| DIN EN ISO 11125-3 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第3部分:硬度測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997 |
| DIN EN ISO 11125-4 | 使用涂料及相關產品前鋼材的預處理.噴丸金屬磨料試驗方法.第4部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997 |
| DIN EN ISO 11125-5 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第5部分:有缺陷顆粒百分比和微結構的測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN ISO 11125-5:1997 |
| DIN EN ISO 11125-6 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第6部分:外來雜質的測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997 |
| DIN EN ISO 11125-7 | 使用涂料及相關產品前鋼材的預處理.噴丸金屬磨料試驗方法.第7部分:含水量測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997 |
| DIN EN ISO 11126-6 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第6部分:煉鐵爐渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997 |
| DIN EN ISO 8501-1 Bb.1 | 使用涂料和相關產品前鋼基材預處理.表面清潔度目視評定.對第1部分的參考性補充:不同磨料噴射清潔造成鋼材表 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives (ISO 8501-1:1988/Suppl:1994); German version EN ISO 8501-1:2001/Supplement:2001 (Endorsement of EN ISO 8501-1:2001/Supplement:2001) |
| DIN EN ISO 8501-1 | 使用涂料和相關產品前鋼基材預處理.表面清潔度目視評定.第1部分:未涂覆和徹底清除原有涂層后鋼材的銹蝕等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:1988); German version EN ISO 8501-1:2001 (Endorsement of EN ISO 8501-1:2001 as German Standard) |
| DIN EN 10089 | 淬火和回火彈簧用熱軋鋼材.交貨技術條件 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| DIN EN ISO 11126-9 | 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004 |
| DIN EN ISO 8502-8 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第8部分:水分的現場折射測定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture (ISO 8502-8:2001); German version EN ISO 8502-8:2004 |
| DIN EN ISO 8503-5 | 涂裝油漆和有關產品前鋼材預處理.噴砂清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004 |
| DIN EN ISO 8502-12 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第12部分:水溶性鐵離子的現場滴定測定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003); German version EN ISO 8502-12:2004 |
| DIN EN ISO 8502-5 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法) | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998); German version EN ISO 8502-5:2004 |
| DIN EN ISO 11126-10 | 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第10部分:鐵鋁石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004 |
| DIN EN ISO 8502-11 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽的現場滴定測定方法(ISO 8502 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006); German version EN ISO 8502-11:2006 |
| DIN 11862 | 飲料及乳制品業用配件.不銹鋼制直通旋塞 | Drink- and dairy fittings; straight-way cocks of stainless steel |
| DIN 11863 | 飲料及乳制品業用配件.不銹鋼制三通旋塞 | Drink- and dairy fittings; three-way cocks of stainless steel |
| DIN 28156 | 填料箱用碳鋼和不銹鋼制攪拌器的軸頭.尺寸 | Shaft end for agitators of carbon and stainless steel, for stuffing boxes; dimensions |
| DIN 43614-2 | 開關裝置和控制裝置.壓縮空氣管道用管.不銹鋼管 | Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits |
| DIN 11483-1 | 乳品設備.清潔和消毒.對不銹鋼的影響的考慮事項 | Dairy installations; cleaning and disinfection; consideration of the action on stainless steel |
| DIN 28154 | 旋轉機械密封的碳鋼和不銹鋼攪拌器的軸端.尺寸 | Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions |
| DIN 28160 | 碳鋼和不銹鋼制攪拌器容器用支撐環.位置 | Support rings for carbon and stainless steel agitator vessels; position |
| DIN 28163 | 碳鋼和不銹鋼制攪拌器軸用填料箱 | Stuffing box for agitator shafts of carbon and stainless steel |
| DIN EN 2064 | 航空航天.帶潤滑襯套的不銹鋼關節軸承.技術規范 | Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992 |
| DIN 28130-1 | 帶攪拌裝置的攪拌器.第1部分:非合金鋼和不銹鋼制容器.術語、部件組合、一覽表 | Agitator vessels with agitation unit; non-alloy and stainless steel vessels; terms, component combinations, summary |
| DIN 65306 | 航空航天.復合材料用的不銹鋼制帶凈孔的嵌件 | Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel |
| DIN 65230 | 航空航天.馬氏體硬化不銹鋼陽極拋光.代號2600 | Aerospace; anodic polishing of maraging stainless steels; code number 2600 |
| DIN EN 2354 | 航空和航天系列.不銹鋼制帶螺紋眼索端的操縱鋼索.尺寸和負荷 | Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads |
| DIN EN 2358 | 航空和航天系列.操縱鋼索的不銹鋼制模鍛帶眼的索端 | Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2360 | 航空航天系列.操縱鋼索的不銹鋼滾制滾動軸承的擠壓連接型叉型端部.尺寸和載荷 | Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2362 | 航空航天系列.操縱鋼索的不銹鋼擠壓連接型球形端部.尺寸和載荷 | Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN 11854 | 食品工業用管配件.不銹鋼制軟管.帶螺紋的軟管接頭和軟管錐形接頭 | Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings |
| DIN 28155 | 碳鋼和不銹鋼制攪動軸的法蘭聯結器.攪拌容器的聯結器.尺寸 | Flanged couplings for carbon and stainless steel agitator shafts; coupling in the agitator vessel; dimensions |
| DIN EN ISO 1127 | 不銹鋼管.尺寸、公差和單位長度的標準質量 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996 |
| DIN 28124-1 | 非合金鋼和不銹鋼制非壓力容器和工藝裝置用人孔蓋 | Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel |
| DIN 28124-3 | 不銹鋼制壓力容器用人孔蓋 | Manhole closures for pressure vessels of stainless steel |
| DIN EN 3292 | 航空航天系列.機體用軸承.不銹鋼單列自定心滾柱軸承.直徑系列 3 和 直徑系列 4.尺寸和負載; 德文版本 EN 32 | Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994 |
| DIN EN 3289 | 航空航天系列.機體用軸承.不銹鋼雙列自定心滾珠軸承.直徑系列 0.尺寸和負載; 德文版本 EN 3289:1994 | Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994 |
| DIN EN 3286 | 航空航天系列.機體用軸承.不銹鋼剛性單列滾珠軸承.直徑系列 0 和直徑系列 2.公稱公差范疇.尺寸和負載; 德文 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994 |
| DIN EN ISO 7046-2 | 十字槽沉頭螺釘(通用頭).產品等級 A.第2部分:8.8 級特性鋼,不銹鋼和有色金屬 (ISO 7046-2:1990); 德文版本 | Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994 |
| DIN 2559-4 | 焊縫預加工.第4部分:不銹鋼無縫管圓焊縫內徑配合 | Preparation of welds; part 4: matching of inside diameters for circumferential welds on seamless pipes of stainless steels |
| DIN EN 3283 | 航空航天系列.飛機用滾動軸承.不銹鋼單列滾珠軸承.直徑系列 8 和 直徑系列 9.尺寸和負載; 德文版本 EN 3283 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994 |
| DIN 28084-3 | 設備支承環和環支承件.第3部分:非合金鋼和不銹鋼攪拌器容器的尺寸和最大工作重量 | Support rings and ring supports on apparatus - Part 3: Dimensions, maximum service weight for on non-alloy and stainless steel agitator vessels |
| DIN EN ISO 8734 | 淬硬鋼和馬氏體不銹鋼制直銷（定位銷） | Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
| DIN EN ISO 8735 | 淬硬鋼和馬氏體不銹鋼制帶內螺紋的等直徑銷 | Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
| DIN 6656 | 風動管道系統.風動管道系統鋼和不銹鋼傳送管、傳送管彎頭和套管 | Pneumatic tube system - Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel |
| DIN EN ISO 8442-2 | 和食品接觸的材料及器具.刀具和餐桌器具.第2部分:不銹鋼和鍍銀餐具的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997); German version EN ISO 8442-2:1997 |
| DIN 30681 | 煤氣裝置的補償器.帶風箱裝置的不銹鋼擴展連接件.安全技術要求、試驗和標記 | Compensators for gas-installations - Stainless steel expansions joints with bellows units - Safety requirements, testing, marking |
| DIN ISO 5832-9 | 外科植入物.金屬材料.第9部分:鍛造高氮不銹鋼 | Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992) |
| DIN EN 1600 | 焊料.不銹鋼和耐熱鋼手工金屬電弧焊藥皮焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification; German version EN 1600:1997 |
| DIN EN ISO 2338 | 未淬火鋼和奧氏體不銹鋼制的等直徑銷 | Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997 |
| DIN EN ISO 8733 | 未淬硬鋼和奧氏體不銹鋼制帶內螺紋的等直徑銷 | Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
| DIN 3384 | 煤氣用不銹鋼軟管組件.安全性要求、試驗和標記 | Hose assemblies of stainless steel for gas - Safety requirements, testing, marking |
| DIN 86341 | 船舶與海上技術.超輕型活動法蘭和對焊發蘭.DN32-DN50(最大到PN25)和DN65-DN125(最大到PN10)鋼和不銹鋼制對 | Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10 |
| DIN EN ISO 3651-1 | 不銹鋼抗晶間腐蝕性能的測定.第1部分:奧氏體和鐵氧奧氏體(雙重的)不銹鋼.用質量損失測量法在硝酸介質中的進 | Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German version EN ISO 3651-1:1998 |
| DIN EN ISO 3651-2 | 不銹鋼抗晶間腐蝕性能的測定.第1部分:奧氏體和鐵氧奧氏體(雙重的)不銹鋼.在含硫酸介質中進行腐蝕試驗 | Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2:1998 |
| DIN 11851 | 食品,化學和醫藥工業用管接頭.不銹鋼制螺紋管連接件.滾壓和焊接連接的設計 | Fittings for food, chemical and pharmaceutical industry - Stainless steel screwed pipe connections - Design for rolling in and welding-on |
| DIN EN 1011-3 | 焊接.焊接金屬材料推薦標準.第3部分:不銹鋼電弧焊 | Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; German version EN 1011-3:2000 |
| DIN EN 1124-2 | 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第2部分:S系統.尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999 |
| DIN EN 1124-3 | 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第3部分:X系統.尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999 |
| DIN 6663 | 氣動管系統.塑料(PVC),鋼鐵,和不銹鋼氣動管系統部件的制造工藝 | Pneumatic tube systems - Workmanship of components for pneumatic tube systems in plastics (PVC-U), ferrous steel and stainless steel |
| DIN 11850 | 食品、化工和制藥工業用管.不銹鋼管.尺寸,材料 | Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials |
| DIN EN 10228-4 | 鋼鍛件的無損檢驗.第4部分:奧氏體和奧氏鐵素體不銹鋼鍛件的超聲波檢驗 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999 |
| DIN EN 502 | 金屬薄板屋頂制品.全支撐不銹鋼薄板屋頂制品規范 | Roofing products from metal sheet - Specification for fully supported roofing products from stainless steel sheet; German version EN 502:1999 |
| DIN EN 12072 | 焊料.不銹鋼和耐熱鋼電弧焊接用絲狀電極、焊絲和焊條.分類: 德文版本 EN 12072:1999 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification; German version EN 12072:1999 |
| DIN EN 10222-5 | 壓力容器用鋼鍛件.第5部分:馬氏體、奧氏體和奧氏體鐵素體不銹鋼 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999 |
| DIN EN 10250-4 | 通用工程用開式模鍛鋼件.第4部分:不銹鋼 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels; German version EN 10250-4:1999 |
| DIN EN 1964-3 | 移動式氣瓶.容量從0.5升到150升(含150升)可重復裝填移動式無縫鋼制氣瓶的設計和結構規范.第3部分:最大R<上 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of stainless steel with a maximum R<(Index)m> value of less than 1100 MPa; German version EN 1964-3:2000 |
| DIN EN 10028-7 | 承壓鋼板.第7部分:不銹鋼 | Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000 |
| DIN ISO 5832-1 | 外科植入物.金屬材料.第1部分:鍛造不銹鋼 | Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997) |
| DIN 11852 | 食品和化學工業用閥門.不銹鋼配件.焊合三通、彎頭和異徑接頭 | Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on |
| DIN EN ISO 7153-1 | 外科儀器.金屬材料.第1部分:不銹鋼 | Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000 |
| DIN EN ISO 8249 | 焊接.奧氏體和雙重鐵素體-奧氏體鉻鎳(Cr-Ni)不銹鋼焊接金屬中鐵素體數(FN)的測定 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000); German version EN ISO 8249:2000 |
| DIN EN 508-3 | 金屬薄板屋面制品.鋼、鋁或不銹鋼薄板制半支撐屋面制品規范.第3部分:不銹鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2000 |
| DIN EN 508-1 | 金屬薄板屋面制品.鋼、鋁或不銹鋼薄板制半支撐屋面制品規范.第1部分:鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2000 |
| DIN EN 508-2 | 金屬薄板屋面制品.鋼、鋁或不銹鋼薄板制半支撐屋面制品規范.第2部分:鋁 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2000 |
| DIN EN 14222 | 不銹鋼外殼的鍋爐 | Stainless steel shell boilers; German version EN 14222:2003 |
| DIN EN 10272 | 承壓設備用不銹鋼棒材 | Stainless steel bars for pressure purposes; German version EN 10272:2000 |
| DIN 32676 | 飲食業、化工業和醫藥業用管件.不銹鋼管卡箍連接.焊接式 | Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type |
| DIN 4935-1 | 井用不銹鋼繞絲濾管.第1部分:帶連續槽隙和螺紋連接的DN 40至 DN 100 | Wire wrapped screens of stainless steel for wells - Part 1: DN 40 to DN 100 with continuous slots and threaded connection |
| DIN EN 10151 | 不銹鋼彈簧帶材.交貨技術條件 | Stainless steel strip for springs - Technical delivery conditions; German version EN 10151:2002 |
| DIN EN 10270-3 | 機械彈簧鋼絲.第3部分:不銹鋼彈簧鋼絲 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire; German version EN 10270-3:2001 |
| DIN EN 10263-5 | 冷鐓和冷擠壓鋼桿材、棒材和線材.第5部分:不銹鋼交貨技術條件 | Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels; German version EN 10263-5:2001 |
| DIN EN 10307 | 無損檢驗.厚度等于或大于6mm的奧氏體和奧氏體鐵素不銹鋼板制品的超聲波檢驗(反射法); 德文版本 EN 10307:20 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001 |
| DIN EN ISO 9626 | 醫療器械用不銹鋼針狀管材 | Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991 + AMD 1:2001) (including amendment A1:2001); German version EN ISO 9626:1995 + A1:2001 |
| DIN 28025 | 不銹鋼噴嘴.PN 10 至 PN 40 | Nozzles of stainless steel - PN 10 to PN 40 |
| DIN 28038 | 不銹鋼制壓力容器和加工裝置用帶圓柱形轂焊接法蘭 | Weld flanges with cylindrical hub for pressure vessels and process apparatus of stainless steel |
| DIN EN ISO 16048 | 耐腐蝕不銹鋼緊固件的鈍化處理 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003 |
| DIN V ENV 1993-1-4 | 歐洲法規3:鋼結構設計.第1-4部分:一般規則.不銹鋼的補充規則; 德文版本 ENV 1993-1-6:1999 | Eurocode 3: Design of steel structures - Part 1-4: General rules; Supplementary rules for stainless steels; German version ENV 1993-1-4:1996 |
| DIN 4935-3 | 井用不銹鋼繞絲濾管.第3部分:帶連續槽隙和螺紋連接的 DN 500至 DN 1000 | Wire wrapped screens of stainless steel for wells - Part 3: DN 500 to DN 1000 with continuous slots and flanged connection |
| DIN 4935-2 | 井用不銹鋼繞絲濾管.第2部分:帶連續槽隙和螺紋連接的DN 100 至 DN 500 | Wire wrapped screens of stainless steel for wells - Part 2: DN 100 to DN 500 with continuous slots and threaded connection |
| DIN EN 10264-4 | 鋼絲和鋼絲產品.繩索用鋼絲.第4部分:不銹鋼鋼絲 | Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire; German version EN 10264-4:2002 |
| DIN 11866 | 無菌、化學工業和藥業用不銹鋼管.尺寸和材料 | Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials |
| DIN 11865 | 無菌、化學工業和藥業用不銹鋼配件.焊接用三通管、彎頭和異徑接頭 | Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on |
| DIN V ENV 1090-6 | 鋼支承結構施工.第6部分:不銹鋼補充規則 | Execution of steel structures - Part 6: Supplementary rules for stainless steel; German version ENV 1090-6:2000 |
| DIN 28031 | 非合金鋼和不銹鋼制非加壓容器和加工裝置用焊接法蘭 | Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel |
| DIN EN ISO 3506-4 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003 |
| DIN 28141 | 非合金鋼和不銹鋼制容器和加工器具用連接法蘭 | Connecting flanges for vessels and process apparatus of non-alloy and stainless steel |
| DIN EN 13828 | 建筑物用閥.建筑物內飲用水供應用手動銅合金和不銹鋼球閥.試驗和要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003 |
| DIN EN 1124-1 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.第1部分:要求、檢驗和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004 |
| DIN 28137-1 | 攪拌器用安裝凸緣.第1部分:非合金和不銹鋼容器用 | Mounting flanges for agitation units - Part 1: For vessels of non-alloyed and stainless steel |
| DIN 28140-1 | 排泄閥用連接件.第1部分:非合金鋼、不銹鋼或有襯鋼.尺寸配合PN10 | Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10 |
| DIN 82103 | 提升、拖引、捆索用元件.弓形鉤環.不銹鋼 | Components for liftig, towing, lashing - Shackle, bow - Stainless steels |
| DIN EN 10088-1 | 不銹鋼.第1部分:不銹鋼目錄 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2005 |
| DIN EN 10088-3 | 不銹鋼.第3部分:一般用途耐腐蝕鋼半成品、棒材、桿材、線材、型材和光亮產品的交貨技術條件 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2005 |
| DIN EN 10088-2 | 不銹鋼.第2部分:一般用途耐腐蝕鋼薄板/板材和帶材的交貨技術條件 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2005 |
| DIN 5512-3 | 有軌車輛用建造用不銹鋼扁平制品 | Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard |
| DIN 28122 | 公稱尺寸DN125 至DN500、PN標示PN10至40的帶不銹鋼面的盲法蘭 | Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40 |
| DIN EN 10216-5 | 壓力用途無縫鋼管.交貨技術條件.第5部分:不銹鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004 |
| DIN EN 12502-4 | 金屬材料防腐蝕保護.配水和蓄水系統中腐蝕可能性的評價指南.第4部分:不銹鋼的影響因素 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels; German version EN 12502-4:2004 |
| DIN 82102 | 提升、拖引、捆索用元件.D形鉤環.不銹鋼 | Components for lifting, towing, lashing - Shackle, dee - Stainless steels |
| DIN EN 10217-7 | 壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2005 |
| DIN EN 1124-4 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.第4部分:真空排水系統和船用排水系統用元件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2005 |
| DIN 28036 | 不銹鋼制壓力容器和加工裝置用焊接法蘭 | Weld flanges for pressure vessels and process apparatus of stainless steel |
| DIN VDE 0250-605 | 焊接用品.不銹鋼和耐熱鋼的氣體保護和非氣體保護金屬弧焊用藥芯電極和焊條.分類 | Cables, wires and flexible cords for power install - Part 605: Screened flexible cable with rubber insulation and PVC sheath nominal voltage U<(Index)0>/U 3,6/6 kV and 6/10 kV |
| DIN EN 10312 | 水和其他水成液輸送用焊接不銹鋼管.交貨技術條件 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| DIN 28136-2 | 攪拌容器.第2部分:非合金和不銹鋼容器頂蓋噴嘴的位置和尺寸 | Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels |
| DIN 11867 | 無菌、化學和制藥工業的生鐵系統用彎頭、不銹鋼焊接管件 | Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries |
| DIN EN 1124-1 Berichtigung 1 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.第1部分:要求、試驗和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004, Corrigenda to DIN EN 1124-1:2004-12 |
| DIN EN 10296-2 | 機械工程和一般工程用焊接圓鋼管.交貨技術條件.第2部分:不銹鋼.德文版本 EN 10296-2 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10296-2:2005 |
| DIN EN 10297-2 | 機械和一般工程用無縫鋼管.交貨技術條件.第2部分:不銹鋼.德文版本EN 10297-2 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10297-2:2005 |
| DIN EN 10028-7 Berichtigung 1 | 壓力容器用扁平鋼軋材.第7部分:不銹鋼.DIN EN 10028-7-2000勘誤 | Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000, Corrigenda to DIN EN 10028-7:2000-06; German version EN 10028-7:2000/AC:2004 |
| DIN EN ISO 9445 | 連續冷軋不銹鋼窄帶材、寬帶材、板材和切割長度.尺寸和形狀公差(ISO 9445:2002) | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002); German version EN ISO 9445:2006 |
| DIN 28138-1 | 攪拌器軸的滾動機構密封.第1部分:碳鋼或不銹鋼.使用數據、組裝尺寸 | Rotating mechanical seals for agitator shafts - Part 1: Carbon or stainless steel - Operating data, assembly dimensions |
| DIN EN ISO 17633 | 焊接用品.不銹鋼和耐熱鋼的氣體保護和非氣體保護金屬弧焊用藥芯電極和焊條.分類 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004); German version EN ISO 17633:2006 |
| DIN EN 14638-1 | 可運輸?shù)臍馄?容量不超過150升的可再充氣焊接容器.第1部分:焊接奧氏體的試驗方法證明設計的不銹鋼氣瓶 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods; German version EN 14638-1:2006 |
| DIN 43661 | 戶內開關設備用槽鋼；設計與安裝詳細說明 | Foundation bars for indoor switchgear; design and mounting particulars |
| DIN 1026-1-2000 | 熱軋槽鋼.第1部分：帶斜度凸緣的槽鋼.尺寸、質量和截面特性 | Hot rolled steel channels - Part 1: Taper flange steel channels; dimensions, masses and sectional properties |
| DIN EN 10279-2000 | 熱軋槽鋼.形狀,尺寸,質量公差.德文版本EN 10279:2000 | Hot rolled steel channels - Tolerances on shape, dimensions and mass; German version EN 10279:2000 |
| DIN 28180-1985 | 管式熱交換器用無縫鋼管.尺寸、尺寸偏差和材料 | Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials |
| DIN EN 10246-6-2000 | 鋼管的無損檢驗.第6部分:無縫鋼管橫向缺陷探測的自動全周長超聲波試驗 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999 |
| DIN EN 10246-4-2000 | 鋼管的無損檢驗.第4部分:鐵磁無縫鋼管橫向缺陷檢測用自動全外周磁換能器檢驗/磁漏檢驗 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
| DIN 2445 Bb.1-2000 | 承受動態載荷的無縫鋼管.設計規則 | Seamless steel tubes for dynamic loads - Design rules |
| DIN 2445-1-2000 | 承受動態載荷的無縫鋼管.第1部分:流體系統用壓力為100至500巴的熱軋管 | Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar |
| DIN 2445-2-2000 | 承受動態載荷的無縫鋼管.第2部分:流體系統用壓力為100至500巴的精密鋼管 | Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar |
| DIN EN 10216-1-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第1部分:特定室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004 |
| DIN EN 10216-4-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第4部分:帶特定低溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004 |
| DIN EN 10216-3-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第3部分:合金細粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004 |
| DIN EN 10216-2-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第2部分:帶特定高溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002 + A1:2004 |
| DIN EN 10209-1996 | 涂釉低碳鋼冷軋板材.交貨技術條件 | Cold rolled low carbon steel flat products for vitrious enamelling - Technical delivery conditions; German version EN 10209:1996 |
| DIN EN 10016-3-1995 | 拉拔和/或冷軋用非合金鋼棒.第3部分:沸騰和沸騰置換低碳鋼棒材的特殊要求 | Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994 |
| DIN EN 10084-1998 | 滲碳鋼.技術交貨條件 | Case hardening steels - Technical delivery conditions; German version EN 10084:1998 |
| DIN EN 10139-1997 | 冷成形加工用無涂層低碳鋼冷軋窄帶材.技術交貨條件 | Cold rolled uncoated mild steel narrow steel strip for cold forming - Technical delivery conditions; German version EN 10139:1997 |
| DIN EN 10111-1998 | 冷彎曲成型的連續熱軋低碳鋼帶和薄鋼板.交貨技術條件 | Continuously hot-rolled low carbon steel sheet and strip for cold bending - Technical delivery conditions; German version EN 10111:1998 |
| DIN EN 10257-1-1998 | 鎧裝電力和通信電纜用鋅或鋅合金涂層的低碳鋼絲.第1部分:陸地鋪設的電纜 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998 |
| DIN EN 10257-2-1998 | 鎧裝電力和通信電纜用鋅或鋅合金涂層的低碳鋼絲.第2部分:海底鋪設電纜 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998 |
| DIN EN ISO 898-5-1998 | 碳鋼和合金鋼制緊固件的機械性能.第5部分:非拉伸應力條件下止動螺釘和類似的緊固件 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 |
| DIN EN 10130-1999 | 冷成形用的冷軋低碳鋼平板.交貨技術條件(包括修正件A1:1998) | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions (includes amendment A1:1998); German version EN 10130:1991 + A1:1998 |
| DIN EN 10253-1-1999 | 對焊管管件.第1部分:一般用途和無特殊檢驗要求的鍛造碳鋼 | Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999 |
| DIN EN ISO 898-1-1999 | 碳鋼和合金鋼制緊固件的機械性能.第1部分:螺栓,螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
| DIN 28115-2003 | 碳鋼噴嘴.PN 10 至 PN 40 | Carbon steel nozzles - PN 10 to PN 40 |
| DIN EN 10327-2004 | 連續熱浸涂覆冷成形低碳鋼帶材和板材.交貨技術條件 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions; German version EN 10327:2004 |
| DIN EN 13322-1-2006 | 可運輸?shù)臍馄?可再填充的焊接鋼氣瓶.設計和制造.第1部分:碳鋼 | Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003 + A1:2006 |
| DIN 51214 | 鋼的試驗.圓鋼絲打節試樣的拉力試驗 | Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens |
| DIN 7993 | 軸和孔用圓鋼絲擋圈及擋圈槽 | Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores |
| DIN 3570 | 20至500NW管用圓鋼帶箍 | Steel Strap for Tubes of NW 20 to 500 |
| DIN 5299 | 半圓鋼絲、圓鋼絲及鍛造的彈簧保險鉤 | Snap hook half-round wire, round wire and forged |
| DIN 15236-4 | 機械式連續運輸機.第4部分:鏈斗升降機、附屬于圓鋼環節鏈的鏟斗 | Continuous mechanical handling equipment; bucket elevators, bucket attachment to round steel link chains |
| DIN 73130 | 活塞銷用圓鋼絲鎖環 | Round wire snap rings for piston pins |
| DIN 685-1 | 經過檢驗的圓鋼鏈.術語 | Round steel link chains; tested terms |
| DIN 5684-1 | 提升用經校準和檢驗的圓鋼鏈索.5級 | Calibrated and tested round steel link chains for lifting purposes; grade 5 |
| DIN 5684-2 | 提升用經校準和檢驗的圓鋼鏈索.6級 | Calibrated and tested round steel link chains for lifting purposes; grade 6 |
| DIN 20142 | 帶圓鋼弓和雙把手的弓鋸 | Hacksaws with steel frames and two handles |
| DIN 762-1 | 連續輸送機用經過校正和檢驗的鏈環節距為5d的2級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d |
| DIN 21381 | 繩索裝置.圓鋼絲索的套環連接板 | Rope attachments; thimble connection plates for round ropes |
| DIN 21386 | 繩索裝置.圓鋼絲索的套環 | Rope attachments; thimbles for round ropes |
| DIN 763 | 不按量規檢驗的長環節圓鋼鏈 | Tested, non-calibrated, long-link round steel chains |
| DIN 762-2 | 連續輸送機用經過校正和檢驗的鏈環節距為5d的3級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d |
| DIN 764-1 | 連續輸送機用經過校正和檢驗的鏈環節距為3.5d的2級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d |
| DIN 764-2 | 連續輸送機用經過校正和檢驗的鏈環節距為3.5d的3級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d |
| DIN 32891 | 圓鋼鏈.質量等級2,不按量規檢驗 | Round steel link chains - Grade 2, non-calibrated, tested |
| DIN 5687-1 | 圓鋼鏈.第1部分:質量等級5,平均公差,經試驗 | Round steel link chains - Part 1: Grade 5, medium tolerance, tested |
| DIN EN 818-2 | 起重用短環圓鋼鏈條.安全性.第2部分:8級止檔鏈中級公差圓鋼鏈條 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996 |
| DIN EN 818-4 | 起重用短環圓鋼鏈條.安全性.第4部分:8級止檔鏈 | Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996 |
| DIN 20637 | 礦山用單軌架空道.經檢驗長鏈節架空圓鋼鏈 | Monorails for mining - Tested round steel chains for suspensions - Tested, long link |
| DIN 685-3 | 經過檢驗的圓鋼鏈.第3部分:試驗 | Round steel link chains, tested - Part 3: Test |
| DIN EN 818-3 | 起重用短環節鏈.安全性.第3部分:鏈式吊索用的中級公差的圓鋼鏈.質量等級4 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999 |
| DIN EN 3145 | 航空航天系列.熱軋圓鋼棒.標稱公差.直徑6mm ≤ D ≤ 250mm.尺寸 | Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001 |
| DIN 685-4 | 經過檢驗的圓鋼鏈.第4部分:標記,試驗合格證書 | Round steel link chains, tested - Part 4: Marking, test certificate |
| DIN 685-2 | 經過檢驗的圓鋼鏈.第2部分:安全要求 | Round steel link chains, tested - Part 2: Safety requirements |
| DIN 22252 | 采礦輸送機和回采設備圓鋼鏈 | Round steel link chains for conveyors and winning equipment in mining |
| DIN 5685-3 | 未經載荷驗證的圓鋼扁節鏈.第3部分:短鏈 | Round steel link chains non proof loaded - Part 3: Short link |
| DIN 5685-2 | 未經載荷驗證的圓鋼扁節鏈.第2部分:半長鏈 | Round steel link chains non proof loaded - Part 2: Semi long link |
| DIN 5685-1 | 未經載荷驗證的圓鋼扁節鏈.第1部分:長鏈 | Round steel link chains non proof loaded - Part 1: Long link |
| DIN EN 10060 | 一般用途熱軋圓鋼棒.尺寸及形狀和尺寸公差 | Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003 |
| DIN EN 14330 | 內河航行船舶.無嵌釘?shù)腻^鏈.圓鋼環節鏈 | Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003 |
| DIN EN 10296-1 | 機械工程和一般工程用焊接圓鋼管.交貨技術條件.第1部分:非合金及合金鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10296-1:2002 |
| DIN EN 10108 | 冷鐓和冷擠壓圓鋼棒.尺寸和公差 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances; German version EN 10108:2004 |
| DIN EN 13025-2 | 包裝.輕型金屬容器.第2部分:20000ml、25000ml和30000ml標稱容量的固定蓋(緊蓋)圓鋼和馬口鐵容器 | Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-2:2005 |
| DIN EN 13025-3 | 包裝.輕型金屬容器.第3部分:20000ml、25000ml和30000ml標稱容量可移動蓋(活蓋)圓鋼和馬口鐵容器 | Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-3:2005 |
| DIN 82056 | 圓鋼環節鏈.張索鏈 | Round steel link chains - Span chains |
| DIN EN 10296-2 | 機械工程和一般工程用焊接圓鋼管.交貨技術條件.第2部分:不銹鋼.德文版本 EN 10296-2 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10296-2:2005 |
| DIN 1581 | 棒鋼材.鏈節帶用型鋼.尺寸.重量 | Steel Bars; Hinge Strip Profiles; Dimensions, Weights |
| DIN 2090 | 扁鋼制螺旋壓縮彈簧.計算 | Helical Compression Springs made of Flat Bar Steel; Calculation |
| DIN 1547-8 | 方鋼及扁鋼型材的成形拉模 | Shaped drawing dies for steel of square and flat section |
| DIN 50142 | 金屬材料的檢驗.扁鋼彎曲疲勞試驗 | Testing of metallic materials; Flat bending fatigue test |
| DIN 59350 | 精制扁鋼和方鋼棒材.尺寸、重量、允許偏差 | Precision flat and square steel bars; Dimensions, weights, permissible deviations |
| DIN 21151 | 鑿井.扁鋼絲索的滑輪.安全性要求和試驗 | Shaft sinking; pulleys for flat winding ropes; safety requirements and testing |
| DIN EN 10067 | 熱軋球頭扁鋼.尺寸和形狀、尺寸、質量公差 | Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass; German version EN 10067:1996 |
| DIN ISO 11677-3 | 紡織機械和附件.敞口綜耳扁鋼綜片及其相應的綜絲合股支撐桿的的主要尺寸.第3部分:帶C型和J型綜耳的綜絲合股 | Textile machinery and accessories - Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods - Part 3: Carrying rods for healds with C- and J-shaped end loops (ISO 11677-3:1995) |
| DIN 59200 | 扁鋼產品.熱軋寬扁材.尺寸、質量和尺寸、形狀和質量公差 | Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass |
| DIN EN 10152 | 電解鍍鋅冷軋扁鋼制品.交貨技術條件 | Electrolytically zinc coated cold rolled steel flat products - Technical delivery conditions; German version EN 10152:2003 |
| DIN EN 10058 | 一般用途熱軋扁鋼棒.尺寸及形狀和尺寸公差 | Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10058:2003 |
| DIN EN 10163-1 | 熱軋鋼板、寬扁鋼和型鋼表面狀態的交貨要求.第1部分:一般要求 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004 |
| DIN EN 10092-1 | 熱軋彈簧扁鋼棒材.第1部分:扁平棒材.尺寸及形狀和尺寸公差 | Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003 |
| DIN EN 10169-1 | 連續有機涂覆(盤繞涂覆)的扁鋼制品.第1部分:一般信息(定義、材料、公差和試驗方法) | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods); German version EN 10169-1:2003 |
| DIN EN 10163-3 | 熱軋鋼板、寬扁鋼和型鋼表面狀態的交貨要求.第3部分:型鋼 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections; German version EN 10163-3:2004 |
| DIN EN 10163-2 | 熱軋鋼板、寬扁鋼和型鋼表面狀態的交貨要求.第2部分:鋼板和寬扁鋼 | Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004 |
| DIN 79 | 操作軸和部件用方鋼 | Squares for operating spindles and operating elements |
| DIN 59370 | 型鋼.光亮直角等邊角鋼.尺寸.允許偏差.重量 | Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights |
| DIN 28081-2 | 容器的型鋼支座.尺寸、材料和結構 | Vessel supports made of steel sections; dimensions, material and design |
| DIN 28081-4 | 容器的型鋼支座.第4部分:支承負荷通過支架作用于容器壁的最大彎曲力矩 | Steel profile supports for vessels; maximum permissible moments on the vessel wall due to profile support loads |
| DIN 28179 | 圓管式熱交換器用U型鋼管.技術規范 | Steel U-tubes for tubular heat exchangers; technical delivery conditions |
| DIN ISO 96-1 | 紡織機械和附件.環綻紡紗機和環綻捻線機的鋼領和鋼絲圈.T型鋼領及其配用鋼絲圈 | Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; T-rings and their appropriate travellers; identical with ISO 96-1:1992 |
| DIN ISO 96-2 | 紡織機械和附件.環綻紡紗和環綻捻線的鋼領圈和鋼絲圈.第2部分:HzcH 型、HZ 型和 J 型鋼領圈及其相應的鋼絲 | Textile machinery and accessories - Rings and travellers for ring spinning and ring doubling frames - Part 2: HZCH-, HZ- and J-rings and their appropriate travellers; identical with ISO 96-2:1992 |
| DIN EN 10055 | 帶圓角的熱軋等腰T型鋼和過渡連接件.尺寸和形狀公差 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions; German version EN 10055:1995 |
| DIN EN ISO 5778 | 造船技術.防風雨的小型鋼艙蓋 | Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000 |
| DIN 1026-2 | 熱軋U型鋼.第2部分:平行凸緣U型鋼;尺寸、質量和剖面性能 | Hot rolled steel channels - Part 2: Parallel flange steel channels; Dimensions, masses and sectional properties |
| DIN ISO 9903-1 | 紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第1部分:無互聯鎖或鏈接的底邊 | Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining (ISO 9903-1:2003) |
| DIN ISO 9903-2 | 紡織機械和附件.梳理金屬針布用異型鋼絲主要尺寸.第2部分:有互鏈接的底邊 | Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining (ISO 9903-2:2003) |
| DIN V ENV 13381-5 | 測定結構構件耐火作用的試驗方法.第5部分:混凝土/壓型鋼板組合構件應用的保護方法 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members; German version ENV 13381-5:2002 |
| DIN 1027 | 鋼棒.熱軋圓邊Z型鋼.尺寸、重量、公差和靜態值 | Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values |
| DIN ISO 9903-1 | 紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第1部分:無互聯鎖或鏈接的底邊 | Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining (ISO 9903-1:2003) |
| DIN ISO 9903-2 | 紡織機械和附件.梳理金屬針布用異型鋼絲主要尺寸.第2部分:有互鏈接的底邊 | Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining (ISO 9903-2:2003) |
| 編號 | 中文名稱 | 英文名稱 |