微信掃一掃，立即回復！
| 序號 | 編號 | 中文名稱 | 英文名稱 |
|---|---|---|---|
| 1 | GB 4793.7-2001 | 測量、控制及實驗室用電氣設備的安全實驗室用離心機的特殊要求 | Safety requirements for electrical equipment for measurement，control and laboratory use--Particular requirements for laboratory centrifuges |
| 2 | JB/T 5153.1-1991 | 板框式加壓濾油機 型式與基本參數 | () |
| 3 | JB/T 5153.2-1991 | 板框式加壓濾油機 技術條件 | () |
| 4 | JB/T 5153-2006 | 板框式加壓濾油機 | () |
| 5 | JB/T 5285-2001 | 真空凈油機 | () |
| 6 | DL/T 521-2004 | 真空凈油機驗收及使用維護導則 | () |
| 7 | DL/T 521-1993(2005) | 真空凈油機使用驗收導則 | () |
| 8 | GB/T 10895-2004 | 離心機分離機機械振動測試方法 | Centrifuge and separator--Measurementmethod of mechanical vibration |
| 9 | GB/T 10901-2005 | 離心機性能測試方法 | Methods of Performance testing for centrifuge |
| 10 | GB/T 13823.14-1995 | 振動與沖擊傳感器的校準方法離心機法一次校準 | Methods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge |
| 11 | GB 19815-2005 | 離心機安全要求 | Safety Requirements for Centrifuge |
| 12 | GB/T 5170.16-2005 | 電工電子產品環境試驗設備基本參數檢定方法穩態加速度試驗用離心機 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test |
| 13 | GB/T 7779-2005 | 離心機型號編制方法 | The model designation of centrifuges |
| 14 | JB/T 5519-1991 | 高速冷凍離心機 | () |
| 15 | GB/T 11188-1989 | 顏料密度的測定(用離心機排除夾帶空氣) | Determination of density of pigments (using a centrifuge to remove entraind air) |
| 16 | HG/T 3835-2006 | 顏料密度的測定(用離心機排除夾帶空氣) | () |
| 17 | JB/T 6118-1992 | TCL 沉降過濾離心機 | () |
| 18 | JB/T 7241-1994 | 進動卸料離心機 技術條件 | () |
| 19 | JB/T 7220-1994 | 刮刀卸料離心機 | () |
| 20 | JB/T 5284-1991 | 防爆型刮刀卸料離心機 | () |
| 21 | JB/T 6119-1992 | TCL 沉降過濾離心機 使用規程 | () |
| 22 | JB 6827-1993 | 實驗室離心機 機械安全要求 | () |
| 23 | JB/T 7439.6-1994 | 實驗室儀器術語 實驗室離心機 | () |
| 24 | JB/T 7466-1994 | 實驗室離心機 基本參數與型號編制方法 | () |
| 25 | JB/T 8051-1996 | 離心機轉鼓強度計算規范 | () |
| 26 | JB 8525-1997 | 離心機安全要求 | () |
| 27 | JB/T 8652-1997 | 螺旋卸料過濾離心機 | () |
| 28 | JB/T 7893.1-1999 | 立式振動離心機 | () |
| 29 | JB/T 8101-1999 | 離心卸料離心機 | () |
| 30 | JB/T 7893.2-1999 | 立式振動離心機用篩網 | () |
| 31 | JB/T 9095-1999 | 離心機、分離機鍛焊件常規無損探傷技術規范 | () |
| 32 | JB/T 9508-1999 | 實驗室高速離心機轉頭 型號及參數系列 | () |
| 33 | JB/T 3263-2000 | 臥式振動離心機 | () |
| 34 | SY/T 5612.6-2003 | 鉆井液凈化系統臥式離心機 | () |
| 35 | JB/T 447-2004 | 活塞推料離心機 | () |
| 36 | NF C42-721-1994 | 測量,控制和實驗室用電氣設備的安全要求.第2-020部分:實驗室離心機特殊要求 | (Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020 : particular requirements for laboratory centrifuges.) |
| 37 | NF U67-001-2000 | 食品加工機.油和脂肪加工的離心機.安全和衛生要求 | (Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements.) |
| 38 | NF B35-207-1969 | 實驗室用玻璃器皿.溶血管.康氏管離心機用溶血管 | (LABORATORY GLASSWARE. HEMOLYSIS TUBES. KAHN TUBES SO-CALLED CENTRIFUGE HEMOLYSIS TUBES.) |
| 39 | SY/T 5678-2003 | 鉆井液凈化系統臥式離心機 | () |
| 40 | JB/T 8865-2001 | 活塞推桿離心機用濾網 | () |
| 41 | EN 12505-2000 | 食品加工機械 加工食用油和油脂的離心機 安全和衛生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| 42 | EN 61010-2-020-1994 | 測量、控制和試驗室用電氣設備的安全要求 第2-020部分：實驗室離心機的特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified) |
| 43 | EN 12547-1999 | 離心機 通用安全要求 | Centrifuges - Common safety requirements |
| 44 | EN ISO 787-23-1995 | 顏料和體質顏料的通用試驗方法 第23部分：密度測定(用離心機消除夾帶的空氣) | General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979) |
| 45 | MT/T 657-1997 | TLL型立式刮刀卸料離心機 | () |
| 46 | JB/T 10411-2004 | 離心機、分離機奧氏體鋼鍛件超聲檢測及質量評級 | () |
| 47 | JB/T 502-2004 | 螺旋卸料沉降離心機 | () |
| 48 | EN 12884-1999 | 生物技術 離心機性能標準 | Biotechnology - Performance criteria for centrifuges |
| 49 | UL 61010A-2-020-2002 | 實驗室用電氣設備.第2部分:實驗室離心機的特殊要求 | (Electrical equipment for laboratory use - Part 2: Particular requirements for laboratory centrifuges ) |
| 50 | QB/T 1754-1993 | 造紙機械立式離心機 | () |
| 51 | JB/T 7220-2006 | 刮刀卸料離心機 | () |
| 52 | IEC 61010-2-020-2006 | 測量、控制和實驗室用電氣設備的安全要求.第2-020部分:實驗室離心機的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
| 53 | ASTM D 2402-1994 | 紡織纖維保水性的標準試驗方法(離心機法) | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
| 54 | ASTM D 1290-1995 | 用離心機測定水乳化拋光劑中沉積物的標準試驗方法 | Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge |
| 55 | ASTM D 5148-1997 | 離心機煤油當量的標準試驗方法 | Standard Test Method for Centrifuge Kerosine Equivalent |
| 56 | BS EN ISO 787-23-1980 | 顏料和填充劑的一般試驗方法.第23部分:密度的測定(用離心機去除夾帶的空氣) | General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air) |
| 57 | BS EN 61010-2-020-1993 | 測量、控制和試驗室用電氣設備安全性要求.第2-020部分:實驗室離心機專門要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory centrifuges |
| 58 | BS EN 12884-1999 | 生物技術.離心機的性能標準 | Biotechnology - Performance criteria for centrifuges |
| 59 | BS EN 12547-1999 | 離心機.通用安全要求 | Centrifuges - Common safety requirements |
| 60 | BS IEC 61010-3-020-1999 | 測量、控制和實驗室用電氣設備的安全要求.滿足IEC 61010-2-020:1992：實驗室離心機的特殊要求的合格鑒定報 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges |
| 61 | BS EN 12505-2000 | 食品加工機械.食用油和油脂處理用離心機.安全和衛生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| 62 | DIN 58970-2-1982 | 試驗室用離心機.相對離心加速度在4000以下的離心機管 | Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000 |
| 63 | DIN EN 61010-2-020-1995 | 測量、控制和實驗室用電氣設備的安全性要求.第2-020部分:實驗室離心機特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:1992, modified); German version EN 61010-2-020:1994 |
| 64 | DIN 58970-1-1996 | 試驗室用離心機.第1部分:定義、測試、標記 | Laboratory centrifuges - Part 1: Definitions, testing, marking |
| 65 | DIN EN ISO 787-23-1995 | 顏料和體制顏料的通用試驗方法.第23部分:密度的測定(用離心機消除夾帶的空氣) | General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979); German version EN ISO 787-23:1995 |
| 66 | DIN EN 61010-2-020/A1-1996 | 測量、控制、調節和試驗室用電氣設備安全要求.第2-020部分:實驗室離心機特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020/A1:1996); German version EN 61010-2-020/A1:1996 |
| 67 | DIN EN 12884-1999 | 生物技術.離心機的性能標準 | Biotechnology - Performance criteria for centrifuges; German version EN 12884:1999 |
| 68 | DIN EN 12547-1999 | 離心機.一般安全性要求 | Centrifuges - Common safety requirements; German version EN 12547:1999 |
| 69 | DIN EN 12505-2001 | 食品加工機械.食用油離心機.安全和衛生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements; German version EN 12505:2000 |
| 70 | IEC/TR 61010-3-020-1999 | 測量、控制和實驗室用電氣設備的安全要求 第3-020部分:IEC 61010-2-020:1992《實驗室離心機的特殊要求》的 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges |
| 71 | ISO 6178-1983 | 離心機 結構和安全規則 圓柱形轉鼓殼體內切向應力的計算方法 | Centrifuges; Construction and safety rules; Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor |
| 72 | ISO 787-23-1979 | 顏料和體質顏料的通用試驗方法.第23部分:密度測定(用離心機消除夾帶的空氣) | General methods of test for pigments and extenders; part 23: determination of density (using a centrifuge to remove entrained air) |
| 73 | ISO 5347-7-1993 | 振動與沖擊傳感器的校準方法 第7部分:離心機法一次校準 | Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge |
| 74 | ISO 5347-8-1993 | 振動與沖擊傳感器的校準方法 第8部分:雙離心機法一次校準 | Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge |
| 75 | JIS T1701-1997 | 醫用離心機 | Centrifuge for medical use |
| 76 | JB/T 4064-2005 | 上懸式離心機 | () |
| 77 | JB/T 10769.1-2007 | 三足式及平板式離心機 第1部分：型式和基本參數 | Three-column and four-point suspension centrifuges-Part 1:Types and basic parameters |
| 78 | JB/T 10769.2-2007 | 三足式及平板式離心機 第2部分：技術條件 | Three-column and four-point suspension centrifuges-Part 2:Specification |
| 序號 | 編號 | 中文名稱 | 英文名稱 |